VADSBO LD220 1-200w Universal Dimmer Trailing Edge Instruction Manual
- June 5, 2024
- VADSBO
Table of Contents
VADSBO LD220 1-200w Universal Dimmer Trailing Edge
Introduction
The low power dimmer LD220 starts at 1VA and is controlled by one or more
resilient 1-pole pushbuttons (toggle switch). The advantage of a pressure
dimmer is that there is no limit to how many places in a room it is possible
to dim from. Mounted in the device box behind the pushbutton or by means of
screw brackets. For dimmable LED lamps and LED drivers, low energy lamps, 230V
halogen lamps, low voltage halogen, light bulbs and
electronic transformers for trailing edge control. The LD220 has a soft start
and overheating protection, as well as a memory function that maintains the
last set light level during switching on / off, even when the dimmer has been
powerless.
Function
On/off – A short press. The dimmer starts with the last used light level (memory function).
Dim up/down
Hold down the button until the desired level is reached
The adjustable minimum dimmer level that is adjusted using a screwdriver. Adjust the level by turning the rotary potentiometer with the chisel. Then dim up and down to study the result. Keep in mind that low energy lamps & LEDs consume less power than incandescent & halogen, therefore the lowest dimmer level is different.
Technical data
Wiring diagram