QFX MPX-1501 Portable Speaker User Manual
- October 27, 2023
- QFX
Table of Contents
QFX MPX-1501 Portable Speaker
WARNING
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED
TECHNICIAN
To prevent fire or electric shock, do not expose this equipment to rain or
moisture. Do not store or operate this product near any liquids,heat sources
such as radiators, heat registers. Clean only with a dry cloth. Users should
exhibit extra safety when this symbol appears in this instruction manual and
follow all precautions as they are stated.
MPX-1501 BATTERY
The MPX-1501 is a lithium battery-powered PA loudspeaker. Be sure that you have completely charged the battery prior to first use to maximize the battery’s lifespan .Once the power adaptor is connected to a power source, it will automatically begin charging (3~4 hours to fully charge the lithium battery ) Even if the battery power is low, it will power on when connected to a power source. When the battery is charging , the battery indicator light is red. When the battery charge fully, the indicator light will turn off. Upon completion of the charging, Please disconnect the unit. With standard usage, a fully charged battery can play for about 1~2 hour. Battery can be rechargedabout 300 times in its lifetime. When not in use, the speaker should always be set OFF to prevent the unit from draining the battery. When the unit is not used for prolonged periods of time, the battery will gradually lose its power. It is recommended to fully charge the battery at least every 60 days.
MPX-1501 BLUETOOTH
- Bluetooth Mode: Open the Bluetooth of phone. Find the Bluetooth name of the unit called”QFX MPX-1501″ to connect. After a successful match, you can play the music from speaker. You won’t need reconnect the Bluetooth when switching mode.
MPX-1501 REAR PANEL
- Master volume Knob: Adjust from Min to Max (Power Switch: ON/OFF)
- Treble Knob: Adjust from Min to Max
- Bass Knob: Adjust from Min to Max
- Microphone Volume Knob: Adjust from Min to Max
- Echo of Microphone Adjustment: Adjust from Min to Max
- Mode Button: Toggle between AUX, USB, TF, FM, BT by short press, press and hold to turn light on or off
- Previous Track Button: Select previous track
- Play/Pause Button(TWS connection)
- Next Track Button: Select next track
- TF Card Slot
- USB Slot
- Microphone Input
- AUX IN
- Power Supply: DC 5V
- Battery Indicator Light
MPX-1501 DISPLAY SYSTEM SETTINGS
- Input Mode: The LED display screen will display the information of input mode for USB/TF/BT/ AUX /FM. When a USB flash drive / TF Card is inserted into the USB/TF input, the unit will automatically switch to USB/TF mode and begin playing Mp3 audio files from the USB flash drive / TF Card.
- Track Number: The track number currently playing from the USB/TF will display.
- FM Mode: All FM channels display here. Press “play/pause” button for auto scan all channels
MPX-1501 REMOTE CONTROL
- STANDBY: Make the unit to be standby mode.
- Input Mode Button: Toggle between USB, TF, FM, AUX, BT
- Mute: Mute the track
- PLAY/PAUSE
- Previous Track: Select the previous channel
- Next Track: Select the next channel.
- EQ: Select EQ mode.
- VOL-: Reduce the master volume
- VOL+: Increase the master volume
- REP: Repeat the playing track.
- Press to Scan Channel in FM Mode
- KEY Number for selecting the certain track for USB flash drive or TF card.
MPX-1501 TWS CONNECTION
- TWS connection: TWS Connection is only for two speakers, can not support quantity over 2 PCS.
- Turn on the Speakers, press the MODE button to switch to BLUETOOTH mode, and the word “BLUE” on the LED screen will flash.
- At the first time, please press the Play/Pause (TWS) button of one unit for 3 seconds. Then two speakers will connect together.
- Connect the phone: Open the phone Bluetooth settings, Search and Connect the main device Bluetooth Name ‘QFX MPX-1501’.
- Select music from your phone and enjoy TWS playing in pairs with two Speakers.
- Exit TWS: Long press the Play/Pause (TWS) button for 3 seconds to exit the TWS function