Ksports KSU9006 Rebounder Net Green Regular Instruction Manual
- May 15, 2024
- KSPORTS
Table of Contents
Rebounder Net Green Regular
Model No.: KSU9006
KSU9006 Rebounder Net Green Regular
CAUTIONS:
- Please use adult supervision & strictly follow these instructions during set up & use.
- Ensure there is no obstruction & do not stand behind the net when others are using it.
- Treat this product with care and it will serve you well.
- Carefully check the net & frame before each use.
- During use, please position yourself in the center & directly in front of the net.
- Exercise usual sports safety precautions as failure to do so may result in injury or damage to property.
Parts list
| A. Base legs x 2 | J. Knobs & washers x 2 |
|---|---|
| B. Lower horizontal bar x 1 | K. Net (36in x 85in) x 1 |
| C. Vertical poles x 2 | L. Net guides x 2 |
| D. Lower diagonal bars x 2 | M. Bungee loops x 10; plus spares x 4 |
| E. Upper diagonal bars x 2 | N. Carry bag |
| F. Corner units x 2 | P. Instruction manual |
| G. Upper horizontal bar x 1 | Q. Height extensions x 2 |
| H. Swivel board x 1 |
Assembly Instruction
Step 1 : Connect both base legs (A) by inserting the ends of the lower horizontal bar (B) into the horizontal outlets of base legs (A) until the locking pins engage in place.
Step 2 : Connect the vertical poles (C) by inserting them into the
vertical outlets of the base legs (A).
Step 3 : Attach the lower diagonal bars (D) by inserting the vertical
poles (C) into the vertical connection outlets of the lower diagonal bars (D).
Step 4 : Connect the upper corner units (F) by inserting the appropriate
ends into the connection outlets of the upper diagonal bars(E).
Step 5 : Attach the upper diagonal bars with comer units (E+F) by inserting them into the connection outlets of the lower diagonal bars(D).
- Please note the left corner unit is labelled L and the right corner unit is labelled ® .
Step 6 : Mount the swivel board (H) using the screw knobs &
associated washers (J) as pictured here.
Step 7 : Prepare the Net
7. 1 : Tie up all the 10 bungee (M) loop net fasteners, one to each of the 10 holes of the net (there should be 4 spare bungee loops)
7.2-7.5 : Insert the upper horizontal bar through the top of the net (K) if necessary and connect it to each end of the corner units (F).
Step 8 : Strap up the net between the holes and anchor points along the frame using the bungee loops as shown in the pictures herepositions A, B, C, D & E. The Bungee loops should be strapped around the bars to obtain the correct tension on the net.
Default strappings for general
use :
A, B, C, D & E: All 5 bungee loop positions should be strapped under the bars
as shown in the pictures 8.1 – 8.3.
Strappings for different racket sports for more advanced users
:
For more advanced users, strap bungee loops under the bar for positions A & B.
The 2 bungee loops of positions C & D can be tied either above or below the
bars to achieve the correct timing between shots for each racket sports
practice. Please refer to the table here for different racket sports &
pictures of strappings over the bar 8.4 – 8.6.
For tennis it is best to strap positions B & E as loose as possible 8.7-8.8.
Insert the anchor nail through the loop between the round adjuster and the end
of the cord.
Strapping Positions for different racket sports (either above or below the bar)
Position| Tennis| Pickleball| Padel| Squash| Racquetball| Table Tennis
C| Above| Above| Above| Below| Below| Below
D| Below| Below| Below| Above| Above| Above
Step 9 : Strap up the triangular net guides(L) on either side of the net at the top. Secure them with hook & loop attachments. These are useful for practising certain spin shots in that they prevent the balls from spinning off the nets.
Step 10 (optional): To extend height by 6 inches, use the height extensions (Q) with vertical poles (C) in Step 2.
NOW YOU’RE READY FOR RACKET SPORTS ACTION !
Disassembly: For disassembling the racket sports rebounder, please perform the above steps in reverse order-step 9 to step 1.
For video assembly instructions –
- Please visit https://www.kathysuniverse.com/pages/rebounder
- Or scan the QR code on this page.
For joining our product testers community –
- Please visit our website at www.kathysuniverse.com
In case of any problems, please either call us at 985-690-0828 or write to us at customerservice@kathysuniverse.com , including your order ID & model number and a photo of the problem, we will respond to you within 12 hours.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>