baby trend WK14XXXC 4.0 Activity Walker Instruction Manual

WK14XXXC 4.0 Activity Walker with Walk Behind Bar
Instruction Manual

Read all instructions BEFORE assembly and USE of the product.
KEEP INSTRUCTIONS FOR FUTURE USE.

WARRANTY

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE, AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product which has been subjected to misuse, abuse, abnormal use, excessive wear and
tear, improper assembly, negligence, environmental exposure, alteration or accident, or has had its serial number altered or removed invalidates all claims against the manufacturer. Any damage to property during installation is the sole responsibility of the end user.
Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/ limited-warranty for complete warranty details.
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
1-800-328-7363
(8:00am ~ 4:30pm PST)
www.babytrend.com

WARNING

WARNING: Please read all instructions before assembly and use of the walker. Keep instructions for future use.
WARNING: Never leave the child unattended. Always keep the child in view while in a walker.
WARNING: Use only on flat surfaces free of objects that could cause the walker to tip over.
WARNING: To reduce the chance of the child slipping out of the seat, check that both feet of the child touches the floor. Never carry a walker with the child in it, as the child may get hurt or slip out.
WARNING: To avoid burns, keep the child away from hot liquids, ranges, radiators, space heaters, fireplaces, etc.
WARNING-STAIR HAZARD: Avoid serious injury or death, block stairs/steps securely before using a walker.

• This walker is to be used only by infants, who are old enough to sit upright on their own and are ready to learn to walk (about 6 months old).
  DO NOT USE IT UNTIL THE BABY CAN SIT UP BY ITSELF.

• Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.

• DO NOT ADJUST TRAY HEIGHT WITH THE BABY IN THE WALKER.

• Periodically inspect seat pad plastic tabs to be sure they are secured in the body.
  DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN.
  Discontinue use should any part become damaged. Please contact our customer service at 1-800-328-7363 to order replacement parts or arrange for repairs.

• Clean the stoppers on the walker base regularly to maintain stopping performance. To clean the seat pad, use only mild household soap and warm water with a sponge or cloth.
  DO NOT MACHINE WASH. For metal and plastic parts, use only lukewarm water and mild soap.

PARTS PIEZAS

ATTENTION: Carefully remove parts from the box. Check that you have all the parts for this model before assembling the baby walker.

*Toys may var

ASSEMBLY.

IMPORTANT! To ensure the safe operation of your product, please follow these instructions carefully. Please keep these instructions for future reference.
IMPORTANT! Before assembly and each use, inspect this product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use it if any parts are missing or broken.
IMPORTANT! Adult assembly is required.
IMPORTANT! Always check that the baby walker is locked in the open position before using it.
TO ASSEMBLE WALKER

1. To open the baby walker raise the tray to the middle position (Fig. 1).

2. The baby walker can be used for 3 different heights. Turn the safety button and slide it vertically to adjust the height. See the 3 heights diagram under the walker for indications of the height being used (Fig. 2).

3. Check that the safety button is turned 90 degrees to prevent the accidental release of the mechanism (Fig. 3).

4. Attach the fabric nearest to the tray, and push pins down through the fabric into the holes of the frame until its snaps into place. Repeat for the opposite side (Fig. 4a).• Insert the pins on the back of the seat, into the holes by pushing downwards until it clicks (Fig. 4b). • Lastly, insert the pins into the holes behind the tray, by pushing downwards until it clicks (Fig. 4c). NOTE: All pins should be aligned to the corresponding holes of the frame and clicked into place to ensure the fabric is securely attached.
   • Insert the Push Handle into the frame. Push in firmly until it clicks into position.
   NOTE: Do Not lift the walker from the Push Handle (Fig. 4d).

5. Place the walker on a solid flat surface with the bottom of the base facing upward. Insert the pins of the wheels into their housing by pressing them until they snap into position (Fig. 5a). • Insert the pins of the 6 stoppers and 2 rear wheels into their housing by pressing them until they snap into position (Fig. 5b). Ensure to apply enough pressure when inserting the stoppers so that they push in lower than the level of all the wheels (Fig. 5c). Please check that wheels are locked into place before proceeding.
   TOY TRAY
   

6. To attach the tray, align the openings to the plastic knobs (Fig. 6a). Push the plastic knobs into the tray and rotate counter-clockwise to lock into position (Fig. 6b ). Do not use the toy tray if it has been damaged or broken. See page 17 for assembling parts. TO REMOVE TRAY
   

7. Unlock the toy tray by turning the two knobs underneath the walker clockwise (Fig. 7a). Then lift the toy tray to remove (Fig. 7b). See page 17 for assembling parts. TO FOLD WALKER
   

8. To fold the walker, turn the button to unlock and push it to release. Then push the tray down to the lowest position (Fig. 8). TO REMOVE the SEAT
   

9. Lift the front plastic pins of the seat upwards and pull the pins out of the holes (Fig. 9a). • Levante los pernos plásticos del asiento hacia arriba y quítelos de los agujeros (Fig. 9a). PLACING THE CHILD IN THE WALKER
   WARNING: To reduce the chance of the child slipping out of the seat, check that both feet of the child touches the floor. Never carry a walker with the child in it, as the child may get hurt or slip out.
   • Always check the walker prior to each use to ensure that the seat is snapped in place and that the walker has no loose or broken parts.
   Do Not use the walker if it is damaged or broken or missing parts.
   • Before placing your child in the walker, please determine that your child is developmentally ready for this type of product. Generally, your child must be able to sit upright unassisted and have adequate neck strength to exhibit very good control of his or her head. Typically, a child should be at least 6 months of age to use this product. Infants develop at different rates and you should discuss the use of a walker with your pediatrician to ensure that your infant
   • Adjust the seat height of the walker to the lowest setting. Place your child in the walker and check that both feet touch the floor. The child should have only part of their weight on their feet when their legs are straight. Adjust the walker height as needed as your child grows. Do not adjust height with child in the walker. Discontinue using the walker if your child attempts to climb out, reaches 30 pounds in weight or 32 inches in height, or when your child is able to walk unassisted.
   • The baby walker can be used for 3 different heights. To adjust the height, remove the baby from a walker. Turn the safety button lengthwise and press the safety button until the mechanism is released. Adjust to the desired height.
   • When the position has been selected, check that the safety button is turned 90 degrees to prevent the accidental release of the mechanism. Always follow this procedure. Never use the baby walker if the button is not in the sideways position. Important: Never change the height when the baby is in the walker.
   TO ASSEMBLE THE TOY TRAY WARNING: Keep batteries out of children’s reach. Old and new batteries should not be mixed. Alkaline, standard carbon- zinc and rechargeable batteries should not be mixed. Remove batteries before storing the music center for a long period of time.
   *The music unit requires two size AA batteries (not included).

10. To open the battery cover, unscrew it first and press the tab to unlatch it while simultaneously pulling out the battery cover. Then, flip the cover open to insert two AA batteries (Fig. 10a). Insert the toy parts as seen on the diagram (Fig. 10b).

11. To listen to MUSIC, press the MUSIC buttons. Press the buttons to change the songs and for the light effects (Fig. 11).

OPERATION

FCC Statement
The FCC Statement applies only to electronic units
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

BABY TREND® CUSTOMER SERVICE
The Customer Service Department can be contacted at 1 800-328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®.

Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
1-800-328-7363
(8:00 a.m. ~ 4:30 p.m. PST)
www.babytrend.com
Wk14XXXA_2L_050922.4
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.

References

• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!
• Baby Trend® | Car Seats, Strollers, High Chairs, Nursery and More!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>