Blauberg B01 AC Forward Centrifugal Fans User Manual

June 5, 2024
BLAUBERG

Blauberg B01 AC Forward Centrifugal Fans

USER’S MANUAL

WARNING: Follow the user’s manual requirements to ensure the durable and trouble-free operation of the fan.

Disconnect the fan from the power supply prior to any connection, servicing, and repair operations. Only duly qualified electricians with valid electrical permits for electric operations at the units with operating voltage up to 1000 V are allowed for mounting and maintenance after careful study of the present user’s manual. The single-phase power mains must comply with the acting local electrical norms and standards. Check the fan for any visible damage of the impeller and the casing before starting installation. The casing internals must be free of any foreign objects which can damage the impeller blades. Due to constant improvements, the design of some models may slightly differ from those ones described herein. While mounting the fan do not compress the casing! Deformation of the casing may result in a motor jam and noisy operation. Misuse of the fan and any unauthorized modifications are not allowed. Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into the room through open chimney flues or other fire- protection devices. A sufficient air supply must be provided for proper combustion and exhaust of gases through the chimney of fuel-burning equipment to prevent back drafting. Transported air must not contain any dust or other solid impurities, sticky substances, or fibrous materials. Do not use the fan in a hazardous or explosive environment containing spirits, gasoline, insecticides, etc. Do not close or block the fan intake or extract vents in order to ensure an efficient stream. Do not sit on the fan and do not put objects on it. The timer circuit is live. Disconnect the fan from the power supply prior to any adjustment operations. The fan delivery set includes a specially designed plastic screwdriver for adjustment of the fan parameters. Use the plastic screwdriver to change the turn-off delay time. This appliance is not intended to be used by persons(including children). If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent. Precautions must be taken to avoid the back-flow of gases into the room from the open flue of gas or other fuel- burning appliances with reduced physical, sensory or mental capabilities or lack of experience and knowledge provided that they have been given supervision or instruction regarding safe use of the product and understand the risks involved. Do not allow children to play with the product.

  • The product must be collected separately at the end of service life.
  • Do not dispose of as unsorted municipal waste.

Read the user’s manual carefully before proceeding with installation works. Compliance with the manual requirements ensures reliable operation and long service life of the product. Keep the user’s manual available as long as you use the product. You may need to re-read the information on the product servicing.

DELIVERY SET

  1. Fan – 1 item
  2. Screws and dowels – 4 items
  3. Fixing bracket – 1 item
  4. User’s manual – 1 item
  5. Packing box

BRIEF DESCRIPTION

The products is an axial fan for exhaust or supply ventilation of small to medium-sized premises.
The fan is designed for connection to 100, 125 and 150 mm air ducts.

OPERATION GUIDELINES

The fan is rated for connection to AC single-phase 220…240 V/50 Hz or 220…240 V/60 Hz power supply, depending
on the fan model type. For details, please refer to the sticker on the fan casing. The fan is rated for operation at the ambient air temperature from +1 °C up to +45 °C. Ingress protection rating against access to hazardous parts and water ingress is IPX4. The fan requires no grounding.

MOUNTING

The fan is designed for vertical or horizontal installation and connection to a round air duct of a matching diameter, Fig. 1–3.Blauberg-B01-AC-Forward-
Centrifugal-Fans-fig-2

ATTENTION!

  • In case of vertical mounting, the fan must be protected against the ingress of rainfalls and condensate inside the fan.
  • Fan installation with direct air discharge upwards is not allowed Fig. 3.
  • Use the supplied fixing bracket for mounting. The attachment of the fixing bracket to the fan is shown in Fig. 4.
  • Fan mounting steps are shown in Fig. 5–12.Blauberg-B01-AC-Forward-Centrifugal-Fans-fig-3Blauberg-B01-AC-Forward-Centrifugal-Fans-fig-4

Wiring optionsBlauberg-B01-AC-Forward-Centrifugal-Fans-
fig-5

MAINTENANCE

  • Cut off the power supply to the fan and take steps to prevent unintentional power supply activation before completion of the maintenance operations.
  • The fan maintenance periodicity is at least once per 6 months, depending on operation conditions.
  • Maintenance works include regular cleaning of the fan surfaces of dust and dirt and checking the reliability of electrical connections.
  • Follow the applicable local maintenance safety requirements.

DIMENSIONSBlauberg-B01-AC-Forward-Centrifugal-Fans-
fig-1

Model øD L H K N
BLABDUCTO 100 99 138 109 160 54
BLABDUCTO 125 124 162 138 160 54
BLABDUCTO 150 149 182 166 190 54

TRANSPORTATION AND STORAGE RULES

Transportation is allowed by any transportation vehicle provided that the product is in the manufacturer’s original package. Store the delivered product in the manufacturer’s original packing box on a dry ventilated premise with the ambient temperature from +5 °C up to + 40 °C and relative humidity less than 80 %. The storage environment must be free of dust, acid, or alkali vapors to prevent corrosion.

DISPOSAL

  • Do not dispose of the domestic waste. The unit contains in part material that can be recycled and in part substances that should not end up as domestic waste.
  • Dispose of the unit once it has reached the end of its working life according to the regulations valid where you are.

BLAUBERG AUSTRALASIA WARRANTY

  • This warranty is given by Blauberg Australasia Pty Ltd, with an office at U5, 45 Eastern Creek Drive, Eastern Creek, NSW 2766, Australia. Phone 1300 475 504
  • From the date of purchase, the original purchaser is entitled to free replacement parts or a new unit for a period of five years from the date of purchase
  • The defective parts or unit must be returned to Blauberg Australasia Pty Ltd at your own cost before an exchange or parts or unit will be given
  • Proof of purchase will be required before a warranty claim is accepted
  • The warranty will also not cover damage caused by misuse, neglect, shipping accident, incorrect or improper installation, voltage supply problems, unauthorized modification or repairs of any kind, exposure to corrosive conditions, exposure to weather, and where no fault is found with the product
  • We will not cover any loss incurred by you in relation to the product or making the claim under this warranty including without limitation any costs associated with installation, reinstallation, or transporting the product.
  • Protection degree index according to IP rating against access to hazardous parts and water ingress – IP24.

Additional information

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement of the purchased product for a major failure of the product. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Our ventilation products also come with five years limited warranty given by the distributor Blauberg Australasia Pty Ltd, with an office at U5, 45 Eastern Creek Drive, Eastern Creek, NSW 2766, Australia, as set out in the instruction manual in the box. If your product does not provide the general features and functions described in the user documentation in the five year period after delivery to you, please call Blauberg Australasia Pty Ltd, (ABN 85 637 003 582) on 1300 475 504 with details of your product, serial number and proof of purchase. You may be required to return the ventilation product to the address listed, in which case such a return will be at your own cost. The benefits under this warranty are in addition to other rights and remedies that you may have at law.

  • Approval mark…………
  • Manufacturing date ……….
  • Sold (name and stamp of the seller) ………
  • Sales date ……..

www.blaubergventilation.com.au BLABDUCTO

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals