BLAUBERG AH Civic EC LB 300 Outer Hood Instruction Manual
- June 1, 2024
- BLAUBERG
Table of Contents
BLAUBERG AH Civic EC LB 300 Outer Hood
Specifications
- Model: AH Civic EC LB 300/500/1200
- Purpose: Designed to prevent ingress of water and foreign objects into ventilation equipment from outside
- Delivery Set: Hood, Installation instruction, Fastening kit, Packing box
Installation Instructions
- Route the air ducts outside of the outer wall on which the hood will be installed. Cut the excess of the air ducts.
- Disassemble the hood to enable access to the fastening holes. Remove the screws that secure the front part of the hood and remove it.
- Mark the holes using the back part of the ventilation hood. Drill 4 holes for the dowels.
- Fix the back part of the hood to the wall.
- Install the front part of the hood and fix it with screws.
Frequently Asked Questions (FAQ)
-
Q: Can children operate this unit?
A: No, the unit may not be operated by children or persons with reduced physical, mental, or sensory capacities. -
Q: What is the purpose of the outer hood?
A: The outer hood is designed to prevent ingress of water and foreign objects into the ventilation equipment from outside. -
Q: What should I do if my mounting place is at a high altitude?
A: If the mounting place is located at a high altitude, please refer to a mounting company possessing appropriate mounting equipment for installation.
PURPOSE
The outer hood (hereinafter referred to as the “hood”) is designed to prevent
ingress of water and foreign objects into the ventilation equipment from
outside.
THE UNIT MAY NOT BE OPERATED BY CHILDREN OR PERSONS WITH REDUCED PHYSICAL,
MENTAL OR SENSORY CAPACITIES, OR LACKING THE APPROPRIATE TRAINING. THE CHOICE
OF UNIT INSTALLATION LOCATION MUST PREVENT UNAUTHORIZED ACCESS BY UNATTENDED
CHILDREN.
DELIVERY SET
| AH Civic EC LB 300 AH Civic EC LB 500| AH Civic EC LB 1200
---|---|---
Hood| 1| 2
Installation instruction| 1| 1
Fastening kit| 1| 1
Packing box| 1| 1
OVERALL DIMENSIONS
| A| B| C| E| D1| D2
---|---|---|---|---|---|---
AH Civic EC LB 300| 648| 370| 175| 230| 6| 200
AH Civic EC LB 500| 748| 480| 230| 290| 6| 250
AH Civic EC LB 1200| 717| 530| 250| —| 6| 402
INSTALLATION
WARNING! IF THE MOUNTING PLACE IS LOCATED AT HIGH ALTITUDE, PLEASE REFER
TO A MOUNTING COMPANY POSSESSING APPROPRIATE MOUNTING EQUIPMENT!
Installation is shown on the example of the AH Civic EC LB 300 ventilation
hood. For Civic EC LB 1200 units, two AH Civic EC LB 1200 hoods must be
installed.
Route the air ducts outside of the outer wall on which the hood will be
installed. Cut the excess of the air ducts.
Disassemble the hood to enable access to the fastening holes. Remove the screws that secure the front part of the hood and remove it.
Mark the holes using the back part of the ventilation hood. Drill 4 holes for the dowels.
Fix the back part of the hood to the wall.
Install the front part of the hood and fix it with screws.
www.blaubergventilatoren.de
B113-14EN-01