GNCC GT1 Outdoor Security Camera User Manual
- June 5, 2024
- GNCC
Table of Contents
GNCC GT1 Outdoor Security Camera
Introduction
Thank you for choosing GNCC T1 outdoor security camera. We provide 30 days return policy and 12 months limited warranty. Send order number to oc.support@gncchome.com and you can extend the return period from 30 days to 90 days. Any problem about our camera please contact timely customer service via oc.support@gncchome.com
Guide Channels
Visit our YouTube Channel “GNCC HOME” for the instructional videos Visit our
Instagram Channel “gncc_home” tor the product photos. Visit our Facebook Home
Page “GNCC Home” for the latest news Join our Facebook Group “GNCC VIP Club”
to get after-sales feedback and promotions
Product Overview
Note: The micro SD card slot and reset button is at the bottom of the camera, open the cover to insert or take out the micro SD card. The reset button is designed inside.
Setting up
Tips: The OSAlO App is developed by the Victure Home team. If you have already
registered an account in the Victure Home APP, please log in to the OSAIO App
directly with that account, without
re-registering.
- Download the OSAIO App by scanning the QR code on the right and create an account. OSAIO
- Connect the camera to a power outlet and wait for 15 seconds until red status light flashes. iOS/Android
- Connect your phone to 2.4G Wi-Fi and login in OSAIO App and click “+ “on the front page.
- Follow the instruction on the app to finish the steps of connection.
Indicator light
-
Indicator light
Status -
Steady red light
The device is powered on and initializing -
Flashing red light
The device is ready to connect -
Flashing between green and red
Wi-Fi account or password is wrong -
Flashing green light
Connection is in progress -
Steady green light
The device is working properly
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference. This device must accept any
interference received, including interference that may cause undesired
operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, it not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that inter-terence will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment oft and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is to comply with Class B limits.
Question asked frequently
-
Q: How can i get the camera connected?
A: Here are some tips about connection below. -
make sure the Wi-Fi is 2.4G please.
-
make the camera 1-3m to the router.
-
make sure the protective tilm of the lens is removed.
-
reset the camera and try to connect it again please.
-
you will hear a promotion when the camera is connected successfully Please contact us via oc.support@gncchome.com if can’t get the camera connected.
-
What f the camera can’t record video to a micro SD card inserted?
A: -
Make sure the micro SD card is not inserted when the camera is powered on.
-
Please tormat the micro SD card to FAI32 firstly on a computer or do that in the app.
-
Please make sure your time zone setting in the app is correct and the recording time be set to a whole day.
-
Try to delete and install the app again, allow the various permissions requested and set the right region.
-
Please contact us via oc.support@gncchome.com attached with
(1) SN on the camera.
(2) your email address which is used to register the OSAO App account.