GNCC MG1 C1 Indoor Cam User Manual
- June 5, 2024
- GNCC
Table of Contents
GNCC MG1 C1 Indoor Cam
IN THE BOX
**Look Closer
**
Warranty
30 days return policy and 12 months limited warranty Timely customer service via ic.support@gncchome.com
Download App
Please search “osaio” on Google Play / App Store, or scanning the QR code to download the App.
How to Set Up
- Search “osaio” on Google Play or App Store to download the App.
- Plug in your camera and wait until the indicator turns red flashing.
- Connect your phone to 2.4G Wi-Fi and log in osaio App and click “+” to add your camera.
- Follow the instruction on the App to finish the steps of connection.
LED Indicator
- Flashing red light: The device is ready to connect
- Flashing between green and red: Wi-Fi account or password is wrong, please reconnect
- Flashing green light: Connection is in progress
- Solid green light: The device is working properly
QUESTION & ANSWER
Q: I can’t get the camera connected?
A: Here are some tips about connection below.
- Make sure the wifi is 2.4G please.
- Make the camera 1-3m to the router.
- Make sure the protective film of the lens is removed.
- Try to use another phone to connect with it please. It will be much appreciate it you can contact us via ic.support@gncchome.com and we will try our best to help you.
Q: What if the camera can’t record video to micro SD card inserted?
A: Please format the SD card to FAT32 firstly on computer or do that in
the App. Secondly, please make sure your time zone setting in the app is
correct and recording time be set to whole day. Then please try to delete and
reinstall the app, allow the various permissions requested and set the right
region. It will be much appreciate if you can contact us via
ic.support@gncchome.com and we will try our
best to help you.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, it not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user IS encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
FCC ID
NOTE: This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter
ICID
To maintain compliance with IC’s RF Exposure guidelines, This equipment should be.installed and operated with minimum distance of 20cm the radiator your body. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter.
CE-RED
This product complies with the radio interference requirements of the European Community. Declaration of Conformity. Hereby. GNCC declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity,visit the Web: https://www.gncchome.com/ This product can be used across EU member states. Due to the used enclosure material, the product shall only be connected to a USB interface of version 2.0 or higher. The adapter shall be installed near the equipment and shall be easily accessible. Do not use the Device in the environment at too high or too low temperature, never expose the Device under strong sunshine or too wet environment. The suitable temperature for -10C+50C and accessories is 0°C-40C. When charging, please place the device in an environment that has a normal room temperature and good ventilation.
- It is recommended to charge the device in an environment with a temperature that ranges from 5C-25C.
- RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body. lo maintain compliance with RF exposure requirement, use product that maintain a 20cm distance between the device and human body.
- Wi-Fi Operating Frequency Range: 2412~2472MHz
- Wi-Fi Max Output Power: 14.46dBm (ERIP)
The following importer is the responsible party (contact for EU matters only)
Importer : OPBC GmbH
Importer Address: Oststr . 6-12 40822 Merchantman Germany
Guide Channels
Please Follow our social media to get more information and
help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>