GNCC GP4 Indoor Camera User Manual

June 17, 2024
GNCC

User Manual
Model: GP4
Indoor Cam

Product Diagram

GNCC GP4 Indoor Camera - Diagram

1 Indicator 5 SD card slot
2 Lens 6 Speaker
3 CDS 7 Lens
4 Reset button 8 USB Type C interface

Note: The micro sd card slot and reset button are under the lens of the camera. Please let the lens up and find them.

Warranty

30 days return policy and 12 months limited warranty Timely customer service via ic.support@gncchome.com

IPC360 Home App

Please search “IPC360 Home” on Google Play/ App Store, or scanning the QR code to download the App.

http://www.ipc365.com/FileServer/App360HomeDownload

Guide Channels

YouTube
@GNCC HOME
For Instructional Video

https://www.youtube.com/channel/UCZiTDE80vpROxN_Z76BOLFg

lnstagram
@GNCC HOME
For Interactive & Sharing

https://www.instagram.com/gncc_home/

Facebook
@GNCC HOME For Latest News

https://www.facebook.com/GNCC- Home-106839131648494/?modal=admin_todo_tour&notif_id=1624358769912476&notif_t=page_invite&ref=notif

Facebook Group
@GNCC VIP Club
Get After-sales Feedback and Promotions

https://www.facebook.com/groups/540099523677079

How to Set Up

  1. Search “IPC360 Home” on Google Play or App Store to download the App.
  2. Plug in your camera and wait until the indicator turns red flashing.
  3. Connect your phone to 2.4G Wi-Fi and log in IPC360 Home App and click”+” to add your camera.
  4. Follow the instruction on the App to finish the steps of connection.

LED Indicator

Indicator light Status
Solid red light The device is powered on and initializing
Flashing red light The device is ready to connect
Solid blue light Connection is in progress
Flashing blue light The device is working properly

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may  cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

IC-ID

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1 )This device may not cause interference. (2)This device must accept any interference, including interference that may cause undesired operation of the device.

CE-RED

This product complies with the radio interference requirements of the European Community.
Declaration of Conformity.
Hereby. GNCC declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity,visit the Web: https://www.gncchome.com/
This product can be used across EU member states.
Due to the used enclosure material, the product shall only be connected to a USB interface of version 2.0 or higher.
The adapter shall be installed near the equipment and shall be easily accessible.
Do not use the Device in the environment at too high or too low temperature,never expose the Device under strong sunshine or too wet environment.
The suitable temperature for -10C-+50C and accessories is 0°C-40C When charging, please place the device in an environment that has a normal room temperature and good ventilation.
It is recommended to charge the device in an environment with a temperature that ranges from 5C -25 ·c
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body. To maintain compliance with RF exposure requirement, use product that maintain a 20cm  distance between the device and human body.
Wi-Fi Operating Frequency Range:2412-2472MHz; Wi-Fi Max Output Power: 14.46dBm(ERIP)
The following importer is the responsible party (contact for EU matters only) Importer: OPBC GmbH
Importer Address: Oststr.6-12 40822 Mettmann Germany

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals