GNCC GT1 Pro Outdoor Surveillance Camera User Guide

June 14, 2024
GNCC

User Manual
Outdoor Cam
T1 Pro

Model: GT1 Pro

About This Guide

This guide provides a brief introduction to the GNCC 2K Security Camera T1 Pro and the osaio App, as well as regulatory information.
Features available in osaio may vary by model and software version.
osaio availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual osaio experience.

Conventions
In this guide, the following convention is used:

Convention Description

Blue| Key information appears in blue, including management page text such as menus, items, buttons, and so on.
---|---
Underline| Hyperlinks are in teal and underlined. You can click to redirect to a website.

More Info

Introduction

With the GNCC 2K Security Camera T1 Pro connected to your home network, you can get the full Monitor Real-time Live Video of any space in your apartment, garage, or courtyard. With a 110° wide-angle view, the T1 Pro has everything covered. Motion Alarms  and Motion detection, to monitor at set intervals and scare away humans, 24/7 to protect the safety of your family and property.

  • 2K Clear Video–Sharp and clear 3MP Full HD provides high-quality video right in the palm of your hand.
  • Instant Motion Alerts–No need to check your GNCC 2K Security Camera T1 Pro throughout the day. Get automatic alerts when it detects motion. Take quick action when you see your child go to the pool, an intruder entering your front door, or a thief  stealing your courier.
  • Motion Alarm–When motion activity is detected, GNCC 2K Security Camera T1 Pro sounds the siren to drive away the bad guys.
  • Clear Night Vision–GNCC 2K Security Camera T1 Pro has 3 million pixels and 4-night vision devices, even at night it is as clear as day.
  • Two-Way Audio-Use crisp two-way audio to communicate with couriers, and family, or drive away unwanted guests.
  • Activity Zones-Control what alerts you receive by creating activity zones, at no charge, around areas that are important to you.
  • 24/7 Recording-Support continuous video recording with Cloud and a Micro SD card inserted into GNCC 2K Security Camera T1 Pro.

Camera Appearance

GNCC 2K Security Camera T1 Pro has a system LED that changes color according to its status, a lens, microphone, speaker, an SD card slot, a 250cm cable, and a RESET button. Refer to below for details.

GNCC GT1 Pro Outdoor Surveillance Camera - Camera
Appearance

System LED

  • Flashing Red: Ready for setup
  • Flashing Green: Connecting to Wi-Fi
  • Solid green: Connection Succeeded
  • Alternating Red and Green: Wrong Wi-Fi Password

Microphone: Built-in microphone Do NOT insert objects into the hole
Speaker
The sound comes out of the camera
Micro SD Slot
Insert a microSD card for recording. (Up to 128GB)
RESET Button
Tilt your camera lens up to find the RESET button

  • Press and hold for over 5s: Reset to Factory mode

Camera Local Storage

GNCC provides options for your video recording. You can subscribe to a GNCC Cloud to store 30-day video clips in the cloud for added backup and more beneficial functions.
Or you can save the footage continuously on a Micro SD Card (UP to 128GB) and play it back with your osaio app. The camera will overwrite the oldest files when the Micro SD Card memory is full. Of course, you can format your full Micro SD Card in the  ‘Storage’ on the osaio App Settings.

GNCC GT1 Pro Outdoor Surveillance Camera - Camera Local
Storage

See the instructions below to insert a Micro SD Card into your GNCC T1 Pro.

  • Micro SD Card isn’t included.
    1. Pick up the T1Pro camera and nd the SD Card slot.
    2. Holding the card in the correct orientation, carefully insert the SD Card into the slot. Push in the SD Card until you hear a clicking sound.

Camera Setup

Follow the steps below to get started with your new GNCC T1 Pro Security Camera.
Step 1. Download osaio
Get the osaio App from the App Store or Google Play, or by scanning the QR code below.

GNCC GT1 Pro Outdoor Surveillance Camera - Qr Code

https://download.osaio.net/app?from_wecom=1

Step 2. Log In
Open the osaio App, and log in with your osaio ID. If you don’t have an account, Register one first with your email address. (2-1)
Step 3. Start Setup
Tap the button in the osaio App and select Cameras > T1 Pro. (3-1)

GNCC GT1 Pro Outdoor Surveillance Camera - Start Setup

Step 4. Set Up Camera
Connection Mode:
We provide the following 2 modes of network distribution, please choose according to your needs.

  1. QR Code (Recommended)
    Use the camera to Scan the QR code on the phone and then follow the App instructions to configure your camera and add it to your home 2.4GHZ Wi-Fi. (4-1)

  2. Hot Spot
    Use the mobile to connect to the hotspot of the camera and then follow the App instructions to configure your camera and add it to your home 2.4GHZ Wi-Fi. (4-2)

GNCC GT1 Pro Outdoor Surveillance Camera - Hot Spot

Step 5. Place Camera
Place your camera install on a wall or ceiling with the provided indicator label and mounting screws.

  • For soft surfaces: Directly screw the screws in.
  • For cement wall: Drill two φ6mm holes with the help of an indicator label, insert the plastic expansion tubes into holes, and screw the mounting screws into the expansion tubes.

Note: Screws and expansion tubes are included in the package.

Main Device Controls

After you successfully set up your camera, you will see the home page of the osaio App. Here you can view and manage all devices that you’ve added to osaio. Tap your camera to enter the live view page and further manage it.

  1. Home Page
    You can see all your osaio devices listed in the Home page. (5-1)

  2. Turn ON/OFF your camera
    Turn on/off your camera quickly by tapping the switch on the home page.
    If the camera is off, it means you are entering the privacy mode and cannot stream live video. (5-2) (5-3)

GNCC GT1 Pro Outdoor Surveillance Camera - OFF your
camera

Motion & Sound Notification
In this section, there will be ‘System messages’ and detection notifications for the camera you have installed and named. (6-1)
After you have Cloud / SD Card card storage, you can directly enter the corresponding monitoring screen by clicking the detection notification message, otherwise, it will jump to the real-time monitoring screen.

  • You can click and select the corresponding monitoring notification to delete. (6-2) (6-3)

GNCC GT1 Pro Outdoor Surveillance Camera - corresponding
monitoring

Camera Settings

Tap your camera in the Home page to enter the live view page and then tap .

GNCC GT1 Pro Outdoor Surveillance Camera - Camera
Settings

  1. General
    Click ‘General’ to enter and you can see the specific information of the camera, including Name, Owner, Camera Model, Device ID, Firmware, IP Address, MAC.
    Name Your Camera
    You can name your T1 Pro Security Camera here, it can be Front Door/Office/Garage and so on.
    GNCC GT1 Pro Outdoor Surveillance Camera - Name Your
Camera

  2. Audio/Video
    This section includes ‘Audio Recording’, ‘Rotate Image’ and ‘Night Vision’.
    Audio Recording: When this switch is turned on, the camera will save the video sound when recording the surveillance video.
    GNCC GT1 Pro Outdoor Surveillance Camera - General
Settings Rotate Image:
    When you install the camera upside down on the ceiling, turn on this  switch, and the reversed surveillance video will return to normal.
    GNCC GT1 Pro Outdoor Surveillance Camera - Rotate
Image Night Vision:
    When “OFF” is selected, the camera will not turn on the infrared night vision function at night, and cannot see a clear night vision picture.
    When “IR” is selected, In low light or dark environments, the infrared lights will allow the camera to view the surrounding area.
    GNCC GT1 Pro Outdoor Surveillance Camera - Night
Vision

  3. Camera ON/OFF
    If the camera is off, it means you are entering the privacy mode and cannot stream live video.
    GNCC GT1 Pro Outdoor Surveillance Camera - Camera ON

  4. LED Indicator
    After connecting the camera, you can choose to turn off the camera light to avoid light interference caused by the camera light.
    GNCC GT1 Pro Outdoor Surveillance Camera - LED
Indicator

  5. Synchronize Time
    Click ‘Synchronize’ to automatically calibrate the time in your time zone, so as to ensure the accuracy of setting the camera on and off time.
    GNCC GT1 Pro Outdoor Surveillance Camera - Synchronize
Time

  6. Detection Notification
    The Motion/Sound Detection Notication can only be received normally when this button is turned on, otherwise no notification will be given.
    GNCC GT1 Pro Outdoor Surveillance Camera - button

  7. Motion Detection
    Turn motion detection on to receive alerts. The higher the sensitivity, the more alerts will be triggered.
    Detection Zone:
    Click ‘Edit’ at the top right of the page to freely select the area you need to monitor. After selecting, remember to click ‘√’ in the upper right corner to confirm the modification.
    GNCC GT1 Pro Outdoor Surveillance Camera - Detection
Zone Schedule:
    Customize the time of Camera’s Motion detection ON/OFF to match your usage time and protect privacy.
    GNCC GT1 Pro Outdoor Surveillance Camera - Schedule• The Bottom: ‘W’ ‘T’ ‘W’ ‘T’ ‘F’ ‘S’ ‘S’ stands for Monday, Tuesday…Sunday
    • Because the camera records on a daily basis, the time span you set can’t cross two different days. If you want to do that, please create two schedules. For example, from 10 PM to 8 AM, you’ll need to create a schedule from 10 PM to 11:59 PM, and another  schedule from 0 AM to 8 AM.

  8. Sound Detection
    Turn sound detection on to receive alerts.
    The higher the sensitivity, the more alerts will be triggered.
    GNCC GT1 Pro Outdoor Surveillance Camera - Sound
Detection Schedule:
    Customize the time of Camera’s Sound detection ON/OFF to match your usage time and protect privacy.
    • The Bottom: ‘W’ ‘T’ ‘W’ ‘T’ ‘F’ ‘S’ ‘S’ stands for Monday, Tuesday…Sunday
    • Because the camera records on a daily basis, the time span you set can’t cross two different days. If you want to do that, please create two schedules. For example, from 10 PM to 8 AM, you’ll need to create a schedule from 10 PM to 11:59 PM, and another  schedule from 0 AM to 8 AM.
    GNCC GT1 Pro Outdoor Surveillance Camera - Customize the
time

  9. Sharing Camera
    Share the camera with your friends and family, and protect your family and property together. (Share with up to 3 users)
    • The users to be shared need to register osaio App with email first and then agree to the invitation in the account.
    GNCC GT1 Pro Outdoor Surveillance Camera - Sharing
Camera

  10. Storage
    You can choose cloud storage/SD card storage freely.
    GNCC GT1 Pro Outdoor Surveillance Camera - Storage Cloud storage:
    osaio has a 7-day, 15-day, and 30-day motion-tracking full-time video storage solution; these are supported by security-tested Amazon Web Services (AWS) to protect your privacy.
    GNCC GT1 Pro Outdoor Surveillance Camera - Cloud
storage SD Storage:
    You can reset the SD card directly here, and you can also choose the type of video recorded by the SD card (continuous recording/motion detection recording).
    • the SD card up to 128GB.
    GNCC GT1 Pro Outdoor Surveillance Camera - SD Storage

Camera Reset

GNCC T1 Pro Security Camera provides two methods to reset your camera.
Method 1:
Tap your camera and go to the Devices Settings page. Then tap Remove Device in the bottom.
Your camera will be removed from your osaio account and restored to factory settings.

GNCC GT1 Pro Outdoor Surveillance Camera - Method 1 Method 2:
Open the rubber plug at the bottom of the camera, long press the ‘Reset Button’ to reset the camera.

GNCC GT1 Pro Outdoor Surveillance Camera - Method 2

Discover GNCC

Use the osaio app to pair your Amazon Alexa or Google Home Assistant, and enjoy a full hands-free experience.
Launch the osaio App. Go to the sidebar and tap Work with osaio. You can choose Amazon Alexa/Google Assistant for detailed instructions.

GNCC GT1 Pro Outdoor Surveillance Camera - Discover
GNCC

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause  ndesired  operation.
Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This  equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a  particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

Made in China
Version 1.0

Documents / Resources

| GNCC GT1 Pro Outdoor Surveillance Camera [pdf] User Guide
GT1 Pro Outdoor Surveillance Camera, GT1 Pro, Outdoor Surveillance Camera, Surveillance Camera, Camera
---|---

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals