GNCC W1 Battery Cam User Manual
- June 14, 2024
- GNCC
Table of Contents
GNCC W1 Battery Cam
Cam Guide
LED
- Spotlight
- Lens
- Infrared light
- Light sensor
- PIR
- Microphone
- Speaker
- Screw mount
- Button
- USB charging port
Hub Guide
- USB camera charging port
- Ethernet Port
- AC Port
- Micro SD card
- LED
- Sync button
- Hanging hole
- Reset pinhole
Setup the camera
- Charge the camera
- Connect the camera to the USB port. LED lights up to red.
- Cam will automatically turn on when charging so no need to press the button on Cam. Charge till the LED blue.
- Download the App
- Download the App-“Osaio “on Google Play or App store and register an account.
- Setup Hub
- Connect the hub directly to a port on your router. Then connect to power. Sign in the App, tap “+” to add a new device, and select “W1”.
LED Guide
Camera
- Button:
- Reset camera–Press the button for 6 seconds until the LED flashes red slowly and release
- Turn on–Press the button for 2 seconds until the LED lights up red and release
- Turn off–Press the button for 2 seconds until the LED lights up red and release
- LED guide:
- Flash red–waiting for hub sync
- A green light flashes slowly and successfully paired with the hub
- Green–connect to the hub successfully Red and green lights flash alternately and quickly–sync with the hub failed/sync with the hub time-out
- When the camera is charging, the LED lights up red;
- When the camera is fully charged, the LED lights up blue.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including interference that
may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However; there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: To comply with the limits of the Class B digital device, pursuant to Part 15 of the FCC Rules, this device is to comply with Class B limits.
CE-RED
- This product complies with the radio interference requirements of the European Community.
- Declaration of Conformity.
- Hereby. GNCC declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. For the declaration of conformity, visit the Web: https://www.gncchome.com/
- This product can be used across EU member states.
- Due to the used enclosure material, the product shall only be connected to a USB interface of version 2.0 or higher.
- The adapter shall be installed near the equipment and shall be easily accessible.
- Do not use the Device in the environment at too high or too low temperature, never expose the Device to strong sunshine or a too wet environment.
- The suitable temperature for -10°C ~ +50°C and accessories is 0°C-40°C
- When charging, please place the device in an environment that has a normal room temperature and good ventilation.
- It is recommended to charge the device in an environment with a temperature that ranges from 5°C ~ 25°C
- RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of d=20cm between the device and the human body.
- To maintain compliance with RF exposure requirements, use products that maintain a 20cm distance between the device and the human body.
- CAUTION RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
- Wi-Fi Operating Frequency Range:2412-2472MHz; Wi-Fi Max Output
- Power: 14.46dBm(ERIP)
- The following importer is the responsible party (contact for EU matters only)
- Importer: OPBC GmbH
- Importer Address: Oststr.6-12 40822 Mettmann Germany
Guide Channels
Documents / Resources
| GNCC
W1 Battery
Cam
[pdf] User Manual
W1 Battery Cam, W1, Battery Cam, Cam
---|---