Belkin Wireless Earbuds, SoundForm Rise True Wireless Bluetooth 5.2 Earphones-Complete Features/User Manual

Belkin Wireless Earbuds, SoundForm Rise True Wireless Bluetooth 5.2

Earphones

Specifications

• BRAND : Belkin
• COLOR : Black
• CONNECTIVITY TECHNOLOGY : Wireless
• FORM FACTOR : In Ear
• PRODUCT DIMENSIONS: 1.5 x 3.97 x 5.19 inches
• Item Weight: 3.99 ounces
• BATTERIES: 2 Lithium-Ion batteries

Introduction

Dual beamforming call technology uses two microphones in each earphone to search out and decrease surrounding noise so you can have clearer calls. The audio experience is enhanced with 6mm dynamic drivers with neodymium magnets. You’ll hear crystal-clear audio with minimal distortion. SOUNDFORM Rise has an exceptional battery life in a compact design, with up to 7 hours of playtime per charge and up to 24 hours of additional power in the case. That’s 31 hours of podcasts, playlists, and audiobooks to listen to. These Bluetooth earbuds are ideal for listening to music. The media-friendly low latency reduces audio lag, allowing you to get the most out of your videos and other media.

The bundled wireless charging case is small enough to fit in a pocket or purse and has an LED indication that shows how much battery life is left. Any Qi- capable charging station will provide convenient wire-free charging. With IPX5 sweat and water resistance, you’ll be able to keep going no matter what the weather throws at you. Strenuous workouts and unexpected weather will not deter you from listening on a daily basis.

WHAT’S IN THE BOX

• SOUNDFORM Rise True Wireless Earbuds
• Wireless Charging Case
• USB-C Charging Cable
• 3 Ear Tip Sizes (S / M / L)

QUICK START GUIDE

HOW TO SETUP

• Turn on Bluetooth on your mobile device to start looking for nearby devices.
• SOUNDFORM True Wireless Earphones will appear when your earbuds are recognized. To finish pairing, tap on the name.

HOW TO RESET

For 10 seconds, press and hold both earbuds. The device will be reset as a result of this action. When the indication lights turn off, release.

HOW TO PAIR

• Swipe down the shade of Notifications.
• In the top row of icons, press and hold the Bluetooth symbol.
• Check to see if the toggle switch at the top of the menu is turned on.
• Pair should be tapped.

Frequently Asked Questions

• What is the best way to increase the volume on my Belkin earbuds?
  Volume Up: To boost the volume to the appropriate level, tap once on the right earbud. Volume Down: To lower the volume to the desired level, tap once on the left earpiece. To begin audio playback, tap twice on either the left or right earpiece. To pause audio playback, tap twice on either the left or right earpiece.

• When your true wireless earphones are fully charged, how do you know?
  Connect the charging cable (included) to the charging connection on the back of the charging case and the other end of the charging cable to a usable USB power source with the earbuds inside. When the power indication light on each earbud turns off, the earbuds are fully charged.

• My Belkin earbuds aren’t connecting?
  When both earphones are placed into the charging case and the lid is closed for 5 seconds, they will disconnect from your Bluetooth® device and reboot. Both earphones automatically turn on and reconnect to your Bluetooth device once you remove them from the case. Both earbuds should now be playing audio.

• What happens if one of the earbuds fails?
  If a single earbud only cuts out every now and again, try twisting and taping the cable until sound returns. If twisting the cord doesn’t work, you’ll need to open the earbud and, if possible, solder the connection. You may need to purchase new earbuds in some circumstances.

• Why aren’t my earbuds communicating with one another?
  Your device’s Bluetooth setting should be turned off. When you take the earbuds out of the case, they will immediately switch on. To manually sync the left and right earbuds, double-press both of them at the same time. NOTE: If something doesn’t work the first time, give it another shot.

• Why aren’t my earbuds working?
  It’s unlikely that your Bluetooth headphones are faulty if they won’t switch on. All you have to do now is reset it. In fact, a quick factory reset can cure a variety of problems with a Bluetooth headset, including: If your Bluetooth headset won’t connect to your smartphone or laptop.

• How do you get both earbuds to play the same song at the same time?
  Select the ‘Levels’ tab from the drop-down menu. To the right of your device, press the ‘Balance’ button. To the right of your device, press the ‘Balance’ button. Adjust the balance until your speakers sound the same, or restore the balance to make it equal.

• What’s wrong with one of my wireless earbuds?
  It’s possible that one side of your wireless earphones isn’t working because you didn’t set them up correctly the first time. Other reasons include a glitch (which necessitates a manual reset), the necessity to reconnect to your other device via Bluetooth, and hardware damage.

• Why are my Bluetooth earbuds not syncing?
  If your Bluetooth devices won’t pair, it’s probably because they’re out of range or not in pairing mode. Try rebooting your devices or having your phone or tablet “forget” the connection if you’re encountering persistent Bluetooth connection issues.

• Should I carry my earbuds with me at all times just in case?
  Yes, except while you’re using them, you should keep them in the case at all times. Now, while they’re in there, they’ll charge unless they’re already full, because the only way to avoid them running out of charge before you’re done is to have them full before you start using them.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>