MUBVIEW Bell-J7 Wireless Doorbell Camera User Manual

June 2, 2024
MUBVIEW

MUBVIEW Bell-J7 Wireless Doorbell Camera

MUBVIEW-Bell-J7-Wireless-Doorbell-Camera-Product

MEET THE DOORBELL

Morecam-J1-Wireless-Video-Doorbell-Camera-fig-1

Doorbell comes with a 4,500mAh rechargeable Li-ion battery.

MEET THE CHIME

Morecam-J1-Wireless-Video-Doorbell-Camera-fig-2

Please mind the battery polarities while installing the batteries.

CHARGE YOUR DOORBELL

Prior to the doorbell installation, please charge up your doorbell for about 8-10 hours till the charging LED turns BLUE from RED.

COMPATIBLE CHARGER (not provided)

USB compatible mobile phone charger (DC 5V=1A~2A).

APP DOWNLOAD

Search ‘Cloud Edge’ in the App stores or scan below QR codes to download the App.

SET UP DOORBELL

Switch on power for your doorbell, and you will see the LED indicator flashes red (once per second). Start setting up your doorbell following the in-app instructions.

Tips

  • Please operate the setup near your Wi-Fi router.
  • Make sure your phone is connecting to a 2.4GHz Wi-Fi.
  • Make sure the doorbell is turned on, and its indicator LED is flashing red. If not, press and hold RESET for 5 seconds.
  • Ensure the Wi-Fi signal is good, and the Wi-Fi password is correct.

PAIR WITH YOUR INDOOR CHIME

  1. Click the SETTING button on the chime, and the chime will be in pairing mode for 20 seconds, with its red LED flashing.

  2. Press the doorbell button to send a pairing signal, and your chime will sound to react, together with its blue LED flashing.
    Chime pairing succeeds.

  3. CHIME SETTINGS
    Ringtone selection
    Click to change ringtone (4 ringtones available).
    Volume control button
    Click to control volume:
    level 1: 110 dB; level 2: 100 Db
    level 3: 90 dB;    level 4: 80 dB
    Settings
    Click to enter/quit pairing mode; Press & hold for 5 seconds to restore factory defaults.

INSTALL YOUR DOORBELL

Select location for your doorbell.

(OPTIONAL) Install at an angle.

You can purchase the following angled brackets so as to point your doorbell to a specific view angle.

Standard installation

Morecam-J1-Wireless-Video-Doorbell-Camera-fig-13

TAMPER ALARM

Anti-theft Tamper Alarm. You can also enable the anti-theft alarm in doorbell settings.

Tamper Alarm On

With tamper alarm on, your doorbell detects disassembly by the trigger on its back, and then a 30-second siren alarm will be triggered. Meantime, video recording get started, and alarm notification will be pushed to the owner’s APP account.

Tamper Alarm Off

You can disable the tamper alarm in doorbell settings, and detach the doorbell without any alarm for battery recharge or regular maintenance.

TROUBLESHOOTING

Is the video doorbell powered by battery?

Yes, there is a Li-ion battery built-in. Thanks to the low power consumption technology, a full charge lasts for more than 2-3 months in our lab test environment. (Lab test condition: 10 events per day, 15 seconds video recording per event)

Does it support legacy hardwire power source?

No, it doesn’t. If you need longer battery endurance, suggest that adding a solar battery charger for your doorbell, if only there is sunshine in your doorbell location. You can contact our after-sale service to know where to buy.

Does it work with existing mechanical chime?

No. The doorbell comes with a battery powered wireless chime to notify people when your visitor presses the doorbell button. If you have an existing indoor chime, please use the provided jumper to bypass the existing chime, so as to provide sufficient power to the new video doorbell. And our wireless chime is 100% wireless, you can place it almost everywhere you like. The transmission distance in open space is more than 100 meters (328 feet).

How many wireless chimes can be added to the doorbell?

You can add as many wireless chimes as your wish on one video doorbell.

Does it support customized Motion Detection Zones?

Yes, it does. You can customize the detection zone in the doorbell settings.

Does the doorbell support cloud storage?

Your doorbell support local video storage by TF card. And you can also activate the cloud storage service in the App. There is a 7-day-free cloud recording trial service.

FAQs

Are MUBVIEW Bell-J7 doorbell cameras continuously recording?****

The majority of doorbell cameras do not record continually. When the camera is on, they only start recording. They then send a notification to your phone so you won’t miss the clip. Several cameras actually record without stopping.

How long are the wireless MUBVIEW Bell-J7 doorbell cameras good for?****

Ring Doorbell batteries have an official rating of lasting between six and twelve months (ratings vary based on models) from a full charge before needing to be recharged. Newer models, such as 10 to 12 month models, often have higher scores.

Should wireless MUBVIEW Bell-J7 doorbells have internet access?****

It’s not necessarily required to have internet access to use a doorbell camera. If you don’t have access to a remote live broadcast or other WiFi- reliant services, there are a few alternatives for employing a smart doorbell.

How does the wireless video doorbell MUBVIEW Bell-J7 operate?****

Video doorbells, which are similar to security cameras, capture both audio and video throughout the day or night using infrared LED sensors, spotlights, or both. Local video storage is accomplished using either a built-in micro-SD card or a cloud server.

How far can the Bell-J7 cameras from MUBVIEW hear?****

The maximum distance at which we could understand audio recorded at a conversational volume was 18 feet when we originally tested the Ring Video Doorbell 3 Plus in one of our labs.

Can a wireless MUBVIEW Bell-J7 doorbell be compromised?****

Even while some of the security flaws in Ring doorbells have been identified and later corrected, they are still widely present, especially considering that they are not encrypted. So can Ring devices be hacked? Yes, they can.

How far can a wireless MUBVIEW Bell-J7 doorbell operate?****

Wireless doorbells that have receivers send a signal to the receiver when someone rings the doorbell. The manufacturer specifies the maximum distance in metres between the doorbell and receiver. Typically, this is between 50 and 100 metres. Actually, the maximum distance is shorter.

Without a battery, how does the MUBVIEW Bell-J7 wireless doorbell function?****

Simply enough, the doorbell is a tiny alternator. By using the mechanical force created by pressing down on the button as a micro-power source, piezoelectricity creates a low-power signal. The doorbell may have a loud enough ring to endure frequent use.

Does the wireless MUBVIEW Bell-J7 doorbell function across walls?****

A signal will become 20% weaker after going through each wall, according to the general rule of thumb.

Is the MUBVIEW Bell-J7 doorbell camera service-free to use?****

Without requiring a subscription, several fantastic video doorbells are available. Instead than retaining video on the cloud, these doorbells store it locally, generally on a microSD card or their internal memory. You have more flexibility over your recordings now that you are not required to pay a monthly membership.

What activates a MUBVIEW Bell-J7 doorbell camera?****

The camera begins to record when the doorbell is pressed. You will hear the doorbell ring if you are home. If not, the camera alerts a desktop or mobile application that can identify the visitor at the entrance.

Is night vision available on MUBVIEW Bell-J7 doorbell cameras?****

The Doorbell Camera uses infrared technology to view at night.

What qualities should the MUBVIEW Bell-J7 wireless doorbell have?****

Since radio waves are utilised by wireless bells to transmit the signal, you should pick one that can operate on a range of frequencies. This will ensure that neither your neighbor’s wireless doorbell nor garage door opener will ring your doorbell.

Can the wireless MUBVIEW Bell-J7 doorbells ring on their own?****

Whether it is connected or wireless, a doorbell has the ability to ring on its own. Wired doorbells frequently ring on their own because of electrical faults. Wireless doorbells may ring on their own due to sensor contact or signal frequency interference.

Are MUBVIEW Bell-J7 doorbell cameras continuously recording?****

The majority of doorbell cameras do not record continually. When the camera is on, they only start recording. They then send a notification to your phone so you won’t miss the clip. Several cameras actually record without stopping.

Video

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

MUBVIEW User Manuals

Related Manuals