GUDE ESS 350 Pneumatic Screwdriver Instructions

GUDE ESS 350 Pneumatic Screwdriver

DELIVERY RANGE

Starting-up the machine

Operation

Technical Data

Noise details
Sound pressure level LpA| 98,2 dB (A)
Sound power level LWA| 109,2 db (A)
Measured according to EN 60745; Uncertainty K = 3 dB (A)
Wear ear protectors!|
Vibration details|
Total vibration values (triaxial vector sum) Determined properly EN 60745

Impact tightening of fasteners of the maximum capacity of the tool:

Vibration emission value ah| 16,851 m/s²
Uncertainty K = 1,5 m/s2|

Read and understand the operating instructions before using the appliance. Familiarise yourself with the control elements and how to use the appliance properly. Abide by all the safety measures stated in the service manual. Act responsibly toward third parties. The operator is responsible for accidents or risks to third parties. In case of any doubts about connection and operation refer please to our customer center.

Safety Instructions

Wear ear protectors. Exposure to noise can cause hearing loss.Use protective equipment. Always wear safety glasses when working with the machine. The use of protective clothing is recommended, such as dustmask, protective gloves, sturdy non-slip footwearand ear defenders.The dust produced when using this tool may beharmful to health. Do not inhale the dust. Wear asuitable dust protection mask. Clamp your workpiece with a clamping device.  Unclamped workpieces can cause severe injury and damage.

Please turn the device immediately off when the tool used gets blocked! Do not turn the device on again when the tool is still blocked. This could cause bounce back with a high reaction moment. Determine and remove the cause of the blocking of the tool used while respecting the safety instructions.
The possible causes may be:

•  it is tilted in the workpiece to be machined
•  it has pierced through the material to be machined
•  the power tool is overloaded

Specified Conditions Of Use

The impact wrench can be used to tighten and loosen nuts and bolts. Do not use this product in any other way as stated for normal use. Not observing general regulations in force and instructions from this manual does not make the manufacturer liable for damages.

Residual risks

Even when the device is used properly and all safety regulations are complied with, there still may be some residual risks.

Emergency procedure

Conduct a first-aid procedure adequate to the injury and summon qualified medical attendance as quickly   as possible. Protect the injured person from further harm and calm them down. If you seek help, state the following pieces of information:

1.  Accident site,
2.  Accident type,
3.  Number of injured persons,
4.  Injury type(s)

Mains Connection

Connect only to single-phase AC system voltage as indicated on the rating plate. It is also possible to connect to sockets without an earthing contact as the design conforms to safety class II.  Only plug-in when machine is switched off .

Symbols

Maintenance

Repairs and works specified in these Instructions may only be performed by qualified authorized staff.Use only original accessories and original spare parts.Keep the device, in particular the air vents, clean at alltimes. Never spray water on the device body! Do not clean the plastics with solvents, fl flammable or toxic fluids. For cleaning, use a damp cloth only. Caution! If the power cord of the appliance gets damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person to  avoid danger. Only a regularly maintained and treated appliance can serve as a satisfactory aid. Insufficient maintenance and care can lead to unforeseen accidents and injuries. If necessary, a list of spare parts can be found at www. guede.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>