SMP M2F03 433MHz TPMS Device User Manual
- June 4, 2024
- SMP
Table of Contents
SMP M2F03 433MHz TPMS Device User Manual
WARNING:
Read and review all instructions, illustrations and warntngs if included or
follow manufacturer recommended service and replaoemenl procedures
betore installing. Professional Installation Only. Improper installation may
result in the failure of lhe motor vehicle Tire Rressure Monitoring System
( ‘TPMS”) Sensor to operate p:roperly.
REMOVAl
- The tire and wl7eel assembly removal must be fo[lowed as outlined in the vehicle manufacturer’s Service Manual.
INSTALLAT ON
Part assembly sequence is shown in Figure t
- Insert the valve 1portion of the TPM sensor in the valve hole until c-0ntact is made between seal and wheel rim.
- When lhe valve is completely inserted, maintain the sensor contact with the !Nheel rtm and manually screw the nut for a few turns.
- While maintaining the sensor and valve in posilion, engage the sookel on the nut, run the nut down and tighten to the specified torque value for the application.
- The sensor is correctly mounted according to the following criteria: Seal is pressed against lhe ouler su liace of the wheel rim’s hole .. Sensor housing is positioned against the rtm’s drop well and contacting at least in one point. Sensor housing should not exceed the rim’s hump height.
- The lire and wl7eel assembly installalion must be followed as outlined in the vehJcle manufacturer’s Service Manual.\
FCC and IC Notice
This Class B digital apparatus complies with Part 15 of ltie FCC Rules,
and with RSS-210 anci ICES-003 standards of Industry Canada.
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>