Foto Electric SW500 smart Health sports watch User Guide

Foto Electric SW500 smart Health sports watch

PRODUCT PARAMETERS

Watch Button

Strap Installation

Parameters

• Product Item H J02
• CPU MT2502
• Display 1.54inch 240*240 TFT
• Accelerator Rate 3-axis weight acceleration
• Product Sensor PPG heart rate sensor
• Battery 200mAh
• Charging Current 200mA/ DC 5V
• Standby Time 5 days
• Bluetooth BLE4.0/ BT3.0
• Product Size 44X38X12.8mm

APP DOWNLOAD AND SETTINGS

APP Download

1. You can download and install the smartwatch terminal app
   through the following two methods.

2. Method 1:
   Please use the phone to scan the watch function menu “APP Download” QR code or scan the QR code as below shown.

3. Method 2:
   Download the “import” app from the App Store or Google Play.

APP Register

After the APP installation is complete, follow the prompts to register and log in.

Connection Pairing

1. On the mobile phone, turn on Bluetooth.
2. At the watch end, enter the (settings] menu, turn on the watch Bluetooth switch and turn on the local searchable switch; then enter the [Bluetooth] menu to search and pair the mobile phone. After pairing, you can synchronize the contacts and control the phone to receive and make calls, play music and other functions.
3. Open the “import” app, enter the main page, and click [device] [add device] to bind the corresponding device. After the connection is successful, you can control the camera function of the mobile phone.

FUNCTIONAL SUPPORT

Basic Functions

• Steps
  Automatically records the number of steps in your daily exercise routine, and calculates calories burned and distance traveled.

• Alarm
  Go to the alarm menu and set the alarm.

• Bluetooth call
  Dial the number in the dial the interface of the watch or phone terminal, the watch and the phone will be synchronized in time.

• Calculator
  Press the calculator menu to start the calculation.

• Anti-lost
  Press the anti-loss menu, click Start, and the paired mobile phone will vibrate and ring; Press watch finding through the APP, and you can find your watch(distance 10M).

• Bluetooth Enabled Photograph
  After pairing with the phone, turn on the Bluetooth camera on the app. When the phone is not locked, you can use the watch to control the phone to take pictures. 
  

Health Function

• Real-time Heart Rate Monitoring
  Press the heart rate menu, stick the back of the watch on the arm, and click start, the watch will automatically measure the heart rate.

• Body Temperature
  Press the temperature menu, put the back of the watch on the arm, and click start, the watch will automatically measure the temperature.

• Blood Oxygen Measurement
  Press the blood oxygen menu, stick the back of the watch on the arm, and click start, and the watch will automatically measure the blood oxygen value.

• ECG Measurement
  Press the ECG menu, stick the back of the watch on the arm, and click start, the watch will automatically measure the ECG value.

• Sleep Monitoring
  Real-time monitoring of body movement during sleep, recording sleep efficiency, deep sleep time and light sleep time.

• Blood Pressure Measurement
  Press the blood pressure menu, stick the back of the watch on the arm, click start, the watch will automatically measure blood pressure data.

Safety Warning

Before using the product, please read the note below to ensure the best performance of this product.

• Do not use this product during charging.
• Do not put this product close to a fire source, and do not place it in or around heating equipment, such as microwave ovens, ovens, etc., the battery may overheat and explode.
• This product is waterproof, do not intentionally soak the water, and do not dry it with microwave heating or other external heating equipment.
• Do not subject this product and its accessories to strong shocks or vibrations, as this may damage the product and its accessories, or cause the battery to ignite or explode.
• Do not place this product and accessories in areas where the temperature is too high or too low, otherwise, the device or battery may malfunction.
• When the temperature is lower than 0 °C, battery performance may be limited.
• Please do not use harsh chemicals, cleaning criteria or substitute accessories for cleaning this product. Please turn off before cleaning and maintenance,and make sure the device is disconnected with the charger.
• Do not disassemble this product and its accessories without permission. The product contains circuits and batteries to avoid damage or safety hazards.
• Collisions cause the screen of this product to rupture. Do not touch, touch the skin, or attempt to remove the broken parts. Please stop using it immediately and contact the designated after-sales service center in time. Regularly check the casing. display, and other components, and stop using the it if the screen is broken.
• Do not allow the device to touch sharp, rough, hard objects or surfaces, otherwise, the device case and screen may be worn or damaged.
• The device has a built-in speaker. Do not put magnetic objects, magnetically attracting metal objects, or magnetic objects away from the device to avoid damage to the device or other objects.
• Emergency call, in an emergency, if the product is turned on and in the service area, you can use the device to make an emergency call. Because the network cannot be guaranteed in all areas, in an emergency, please do not use this product as the only way of contact.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>