dji Avata Pro View Combo Drone UAV Quadcopter User Guide

dji Avata Pro View Combo Drone UAV Quadcopter

Product Information

• Product Name: DJI Fly App
• Version: v1.0
• Compatible Devices: DJI Goggles 2, DJI FPV Goggles V2
• Power Supply: 30 W USB PD
• Supported Languages: English (EN), Simplified Chinese (CHS), Traditional Chinese (CHT), Indonesian (ID), Korean (KR), Thai (TH), Italian (IT), Polish (PL), Portuguese (PT-BR), Arabic (AR)

Product Usage Instructions

1. To check the battery level, press the power button once.
2. To power on/off, press the power button, then press and hold it.
3. To link the aircraft and goggles:
   • Press the link button on the goggles. The goggles will start beeping continually.
   • Press and hold the power button on the aircraft until it beeps once.
   • Ensure that the live view is displayed in the goggles.
4. To link the aircraft and motion controller:
   • Press and hold the power button on the aircraft until it beeps once.
   • Press and hold the power button on the controller until it starts beeping continually.
   • The beeping will stop once the devices are linked.
5. To connect the USB-C OTG cable:
   • Plug one end of the OTG cable into the USB-C port of the goggles.
   • Plug the other end of the OTG cable into the mobile device using a suitable cable (not included).
6. Run the DJI Fly App and follow the prompts to activate all DJI devices.

Note :
Make sure that all devices used with the aircraft have been updated to the latest version via the DJI ASSISTANTTM 2 software before linking and powering on. For further information and support, please visit the DJI website or contact DJI Support.

INSULATION INSTRUCTION

https://s.dji.com/guide24

Check battery level: press once.Power on/off: press, then press and hold.

**Linking and Activation

**

For Pro-View or Fly Smart Combo, linking is required if the status indicator on top of the aircraft blinks yellow quickly after all the devices are powered on. The separately purchased aircraft has to link to the goggles and controller. Make sure that the devices used with the aircraft have been updated to the latest version via the DJI ASSISTANTTM 2 (Consumer Drone Series) software (https://www.dji.com/avata/downloads ) before linking and powering on all the devices.
Figure A:
Link Aircraft and Goggles

1. Press the link button on the goggles. The goggles will start to beep continually.

2. Press and hold the power button on the aircraft until it beeps once.

3. Make sure the live view is displayed in the goggles.
   Figure B: Link Aircraft and Motion Controller

4. Press and hold the power button on the aircraft until it beeps once.

5. Press and hold the power button on the controller until it starts to beep continually.

6. Beeping stops once linked.
   Figure C: Connect the USB-C OTG cable to the USB-C port of the goggles and then to the mobile device with a suitable cable (not included), run DJI Fly and follow the prompts to activate all DJI devices.

https://www.dji.com/avata/downloads

WE ARE HERE FOR YOU

Documents / Resources

| dji Avata Pro View Combo Drone UAV Quadcopter [pdf] User Guide
Avata Pro View Combo Drone UAV Quadcopter, Avata Pro, View Combo Drone UAV Quadcopter, Drone UAV Quadcopter, UAV Quadcopter, Quadcopter
---|---

References

• s.dji.com/guide24
• DJI - Official Website
• DJI Avata - DJI
• DJI Avata - Downloads - DJI

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>