Foto Electric Supply SF306 Smart Bracelet User Manual
- June 6, 2024
- Foto Electric Supply
Table of Contents
Smart bracelet
User manual
1, Introduction of the main part
**2, power on/off button
Long press the power on/off button for around 4 seconds to power on/off.
3, charging**
Both hands hold on to both sides of the fitness band movement, pull the strap
a bit, and take the fitness band movement, then find the USB side, it is micro
5pin USB charging.
Micro 5pin USB Charging
4, Install the “LEFUN HEALTH” APP on your phone
A, scan below QR code below to download APP.
http://app-software-source.com/Lefun_Health/download.html
B, search “Lefun Health” APP on IOS APP store or android market to download
and install APP.
5, download and install APP.
After downloading APP on a mobile phone, turn on the mobile phone
Bluetooth, there is MAC data on the smart bracelet interface, find it to
connect bracelet with mobile phone APP. For the first time connect APP, the
bracelet will sync time, date
automatically.
(1) After pairing Bluetooth, APP will save Bluetooth ID, when open APP
Bluetooth will connect automatically.
(2)android mobile phone please make sure to allow APP to access.
6, APP functions and settings:
(1)personal data setting: in APP, find “my data”, can set your personal
information: gender, time system, birthday, height, weight, target step,
calorie, mileage.
(2)messages reminding: when mobile phones have incoming calls, the bracelet
will have vibration and show call number, when having SMS, wechat,QQ,facebook
messages,bracelet will also have a vibration to remind you.
(3)synchronize all data: here to sync step, sleep monitor, kilometer, heart
rate, calories, blood pressure data.
(4)band display setting: Here to set bracelet different interface
display:steps, calorie,heart rate,blood pressure,MAC,mileage,find phone.
(5)band function setting: Sedentary reminder: set time interval, bracelet will
have a vibration to remind you on time.
Drinking reminder: set time interval,device will remind you to drink water.
Smart anti-lost: turn it on, when Bluetooth is disconnected, the bracelet will
remind you.
The screen on upon raising: turn it on, when raising a hand, will wake up the
bracelet screen.
Shake for a selfie: turn it on, open up the mobile phone camera APP, shake the
bracelet as a remote control to take pictures.
(6)smart alarm: set alarm here.
(7)search device: while connecting Bluetooth with bracelet, click here
bracelet will have a vibration reminder
FCC Caution:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment. Note: This equipment
has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The
device can be used in portable exposure conditions without restriction.