BLUE BEAR PROTECTION BAP100 Air Purifier User Manual
- June 4, 2024
- BLUE BEAR PROTECTION
Table of Contents
BLUE BEAR PROTECTION BAP100 Air Purifier
INSTRUCTIONS
CHILD LOCK” BUTTON/”SLEEP MODE” BUTTON,
Press this button to turn on & off sleep mode function.
After the Sleep Mode indicator flashes for approximately 5 seconds, the Air
Purifier enters into Sleep Mode. In Sleep Mode, all of the unit’s lights are
turned off, and the Speed is automatically set to LOW (D speed. Press any
button,
(EXCEPT the Power button) on the control panel to exit Sleep Mode. If the
Power button is pressed while the unit is in Sleep Mode, the machine will be
turned off.
Press and hold for 3-5 seconds to turn on & off child lock function.
WIFI” BUTTON/”AUTO MODE” BUTTON:
Press this button to turn on & off auto mode function.
Press and hold for 3-5 seconds to active or reset WIFI connection.
SPEED” BUTTON,
Press the button each time to select L(D, M(ID, H(IID, Max speed.
PM 2.5 indicator:
Air quality indication LED ring show different color in below logic:
INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
The RED LED of filter reset being ON continuously indicates that it is time to
replace the filter. Follow the instruction below to change filter and reset
the program. *Combination Filter will last approximately 6 months.
- Find the lock on the base of the unit.
- Unlock it by moving it to the left.
- Lift up the unit.
- Get the dirty filter out and put a new one into it.
- Set back the unit and move the lock to the right.
- Press Power on/off button for 5s to reset the unit.
For more information and “how-to” videos on changing you air filer, please visit www.myblueaura.com.
CLEANING & MAINTAINING
The machine should be cleaned at least once every month by a clean, dry, soft
cloth. More frequent cleaning may be required depending on environmental
conditions.
NOTE:
Do NOT stick any foreign objects or your fingers into the unit.
Do NOT use gasoline, benzine, thinner, harsh cleaners, etc. on and/or in the
unit while cleaning as they will damage the product.
NEVER use alcohol or other solvents.
FILTER CLEANING
FILTER should be cleaned once each month by vacuum cleaner.
Note: Filters should be replaced at least once every 6 months. More
frequent cleaning and replacing may be required depending on environmental
conditions.
WARRANTY: 1 year from the date of purchase
FOR ANY WARRANTY CLAIMS, PLEASE RETURN YOUR UNIT OR SEND IT WITH FREIGHT PREPAID TO YOUR DEALER, TOGETHER WITH YOUR PROOF OF PURCHASE.
For questions or to reorder filter, please visit us at: www.myblueaura.com
Blue Aura Air Purifiers
641 Lexington A venue, 21st floor New York NY 10022
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Warning: Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radio Frequency Exposure Statement
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter,
End-Users must be provided with transmitter operation conditions for
satisfying RF exposure compliance.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions:
This device may not cause interference.
This device must accept any interference, including interference that may
cause undesired operation of the device.
The antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
collocated or operating in conjunction with any other antenna or transmitter,
End-Users must be provided with transmitter operation conditions for
satisfying RF exposure compliance.