BRESSER 7007411 Hygrometer MA Weather Station Instruction Manual

Weather Station
Hygrometer MA

Visit our website via the following QR Code or web link to find further information on this product or the available translations of these instructions.

www.bresser.de/P7007410000000

WARRANTY

www.bresser.de/warranty_terms

Imprint

Bresser GmbH Gutenbergstr. 2 46414 Rhede Germany www.bresser.de

For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We apologize for any inconvenience caused by the fact that we cannot process inquiries or submissions sent directly to the manufacturer’s address. Errors and technical changes excepted. © 2021 Bresser GmbH All rights reserved.
The reproduction of this documentation – even in extracts in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark, and/or patent law in Germany, the European Union, and/or other countries.

Features

• Mold warning per alarm, ventilation indicator
• Hygrometer and thermometer
• 24-hours history for humidity and temperature
• Information for a healthy and safe indoor climate.
• Inside temperature display (0 to 50 °C)
• Dew point temperature display (0 to 50 °C)
• Humidity display (20% to 95%)
• Temperature format selection (°C/°F)
•  Touch control panel

About this Instruction Manual

NOTICE
These operating instructions are to be considered a component of the device.
Read the safety instructions and the operating manual carefully before using this device.
Keep this instruction manual in a safe place for future reference. When the device is sold or given to someone else, the instruction manual must be provided to the new owner/ user of the product.

General safety instructions

Danger of suffocation!
****Improper use of this product may result in suffocation, especially for children. It is therefore imperative that you observe the following safety information.

• Keep packaging materials (plastic bags, rubber bands, etc.) away from children! There is a danger of choking!
• This product contains small parts that can be swallowed by children! Choking hazard!

Risk of an electric shock!
****This device contains electronic parts that are powered by a power source (AC adapter and/or batteries). Improper use of this product may result in electric shock. Electric shock can cause serious or fatal injuries. It is therefore imperative that you observe the following safety information.

• Never leave children unattended when handling the device! Follow the instructions carefully and do not attempt to power this device with anything other than the power sources recommended in this instruction manual, otherwise, there is a danger of an electric shock!

Explosion hazard!
**** Improper use of this product may result in fire. It is essential that you observe the following safety information in order to avoid fires.

• Do not expose the device to high temperatures. Use only the recommended batteries. Do not short-circuit the device or batteries, or throw them into a fire! Excessive heat or improper handling could trigger a short circuit, a fire, or an explosion!

NOTICE
**** The danger of material damage! Improper handling may result in damage to the unit and/or accessories. Therefore, use the device only in accordance with the following safety information.

• Do not disassemble the device! In the event of a defect, please contact your dealer. They will contact the Service Center and can arrange the return of this device for repair if necessary.
• Do not immerse the unit in the water!
• Do not expose the device to impacts, vibrations, dust, constant high temperatures, or excessive humidity. This can result in malfunctions, short-circuits, or damage to the batteries and components.
• Use only the recommended batteries. Always replace weak or empty batteries with a new, complete set of batteries at full capacity. Do not use batteries from different brands or types or with different capacities. Remove batteries from the device if it is not to be used for a longer period of time!
• Do not use rechargeable AA batteries, as these will not give out the correct voltage for use.

NOTICE
Risk of voltage damage!
The manufacturer is not liable for damage related to improperly installed batteries!

Gutenbergstr. 2
46414 Rhede
Germany
www.bresser.de

For any warranty claims or service inquiries, please refer to the information on “Warranty” and “Service” in this documentation. We apologize for any inconvenience caused by the fact that we cannot process inquiries or submissions sent directly to the manufacturer’s address.
Errors and technical changes excepted.
© 2021 Bresser GmbH
All rights reserved.

The reproduction of this documentation – even in extracts in any form (e.g. photocopy, print, etc.) as well as the use and distribution by means of electronic systems (e.g. image file, website, etc.) without the prior written permission of the manufacturer is prohibited.
The designations and brand names of the respective companies used in this documentation are generally protected by trade, trademark, and/or patent law in Germany, the European Union, and/or other countries.

Parts overview and scope of delivery

Illustration 1: Hygrometer parts overview

Illustration 1: Hygrometer par

1 Display
3 ON/OFF touch button (turn on/off the alarm)
5 C/F touch button (change between °C and
°F, value setting downwards or alarm setting)
7 Battery compartment cover
9 stand clip (removable)| 2 SET/DEW POINT touch button (change  display or alarm setting)
4 Light signal when alarm is activated
6 MAX.MIN touch button (change between
maximum and minimum the value display or delete all values)
8 Battery compartment
---|---

Thermo/Hygrometer (A), stand clip (B)
Recommended batteries (not included)
2 pcs. Micro batteries (1.5V, AAA type)

Screen display

Illustration 2: Hygrometer screen display

1 Mould alert symbol (will be displayed when the upper limit value is exceeded)
3 Value axis for humidity
5 Lower value limit/borderline
7 Humidity value (in %) (display mode selectable)
9 MIN symbol (will be displayed when the lowest value is reached)
11 MAX symbol (will be displayed when the highest value is reached)
13 Temperature unit (°C or °F selectable)| 2 Humidity value bar display
4 Upper value limit / borderline
6 24-hours history for humidity
8 Dew point symbol (will be displayed when the dew point level is reached)
10 ALERT symbol (will be displayed on alarm setting)
12 Temperature value (display mode selectable)
14 Indoor climate indicator
---|---

Setting up power supply

1. Remove the stand clip.
2. Remove the battery compartment cover.
3. Insert the batteries into the battery compartment. Ensure that the battery polarity (+/-) is correct.
4. Replace the battery compartment cover.
5. Re-attach the stand clip.

Automatic measurement display

Measurements for the indoor area will be displayed on the device once the power supply was enabled.

Mold alert

1. In normal display mode, touch the C/F touch button for approx. 3 seconds to switch to mold alert settings mode. MOULD ALERT and the humidity display will flash.
2. Touch the C.F/UP or MAX.MIN/DOWN touch button to set the desired value. Possible values: 60%, 65%, 70% or 75%.
3. Touch the C/F touch button again for approx. 3 seconds to save the settings. A Mould alert will be triggered if the humidity will reach the set value.
4.  “Light signal when the alarm is activated” will flash and MOULD ALERT will be displayed on the screen until the humidity drops below the set value again.

Humidity alert

1. In normal display mode, touch the SET/DEW POINT touch button for approx. 3 seconds to switch to humidity alert settings mode. Humidity upper limit display will flash.
2. Touch C.F/DOWN or MAX.MIN/UP touch button to set the desired value.
3. Touch the SET/DEW POINT touch button to switch to the humidity lower limit setting.
4. Touch the C.F/UP or MAX.MIN/DOWN touch button to set the desired value.
5. Finally, touch the SET/DEW POINT touch button to exit settings mode.
6. Touch the ON/OFF touch button to activate the humidity alert. ALERT will be displayed on the screen.
7. Touch the ON/OFF touch button again to disable the humidity alert. ALERT will not be displayed.

Changing the measurement displays

• Touch the SET/DEW POINT touch button to switch between the current temperature display and the dew point temperature display. During the dew point temperature display, DEW POINT will be displayed next to the humidity value.
• Touch the C/F touch button to switch between the temperature display in °C and °F.
• Touch the MAX.MIN touch button several times to display one after another the maximum, minimum and current temperature and humidity values. MAX, MIN, or nothing will be displayed.

Disposal

Dispose of the packaging materials properly, according to their types, such as paper or cardboard. Contact your local waste disposal service or environmental authority for information on the proper disposal.
Do not dispose of electronic devices in the household garbage! According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its transposition into national law, used electrical equipment must be collected separately and recycled in an environmentally sound manner. Batteries and rechargeable batteries must not be disposed of with household waste. You are legally obliged to return used batteries and accumulators and can re-turn the batteries after use either in our sales outlet or in the immediate vicinity (e.g. in the trade or in municipal collection points) free of charge. Batteries and accumulators are marked with a crossed-out dustbin and the chemical symbol of the pollutant, “Cd” stands for cadmium, “Hg” stands for mercury and “Pb” stands for lead.

EC declaration of conformity

  A “Declaration of conformity” in accordance with the applicable directives and corresponding standards has been prepared by Bresser GmbH. The full text of the EC declaration of conformity is available at the following Internet address: www.bresser.de/download/7007410000000/CE/7007410000000_CE.pdf

Service

Please contact the service center first for any questions regarding the product or claims, preferably by e-mail.
e-mail: service@bresseruk.com
Telephone*: +44 1342 837 098
BRESSER UK Ltd
Customer Support
Suite 3G, Eden House
Enterprise Way
Edenbridge, Kent TN8 6HF
United Kingdom

• Number charged at local rates in the UK (the amount you will be charged per phone call will depend on the tariff of your phone provider); calls from abroad will involve higher costs.

References

• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | Startseite | Expand Your Horizon mit BRESSER
• Bresser | BRESSER MA Hygrometer mit Schimmelalarm | Expand Your Horizon

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>