AFU CD-35H Portable CD Player User Manual

AFU CD-35H Portable CD Player

Specifications:

• Compliance : FCC and ISED radiation exposure limits
• Regulatory Compliance : FCC Part 15, ISED licence-exempt RSS(s)
• Operating Environment : Uncontrolled environment

Product Information:
The CD-35H complies with FCC and ISED radiation exposure limits for an uncontrolled environment. It is equipped with licence-exempt transmitter(s) that meet regulatory standards set by Innovation, Science and Economic Development Canada and the FCC.

Product Usage Instructions

RF Exposure Statement:
This equipment should not be co-located or operated with any other antenna or transmitter to comply with radiation exposure limits.

FCC Warning:
Operation is subject to FCC Part 15 rules. Ensure the device does not cause harmful interference and can accept any received interference. Follow these steps if interference occurs:

• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Use a different circuit for equipment and receiver.
• Consult a dealer or radio/TV technician for assistance.

NOTE: Unauthorized changes to the unit may void the user’s authority to operate the equipment.

IC Warning:
This device contains licence-exempt transmitter(s) compliant with ISED’s licence-exempt RSS(s). Ensure the device does not cause interference and can accept any received interference to prevent undesired operation.

Thank you for purchasing our personal audio products. High-quality CD player is an electronic acoustic technology product carefully designed by our company. To obtain the perfect use effect and prolong the service life of this product, correct use is very important, please read this manual carefully before use it.

VERY IMPORTANT TIPS
When using this product, please follow the prescribed steps, otherwise you may be exposed to harmful radiation.

•  This CD player is a CLASS 1 LASER product.
• When the CD cover is opened or carelessly closed, an invisible laser will be generated.
• Please do not touch the bald head at will, otherwise it will affect the playback performance.

BUTTON DESCRIPTION

|

STOP /SLEEP button

| Short press for stop playback ,

Long press for  sleep function . C 0FF-90min)

|

Previous button

| Short press to skip to the previous track, Long press to fast rewind.

|

FM transmit button

| 1.  Press first time to enter FM transmit setup status.

2.  Press second time to enter FM transmit status.

3. Press again to cancel this function.

|

Bluetooth transmit button

| Press first time to enter to Bluetooth transmit status.press again to cancel it.

| Program button| Program tracks from CD or USS

mode.

|

Repeat button

| Single /All /Random / Play first 1Os of file playback mode
13.| Play /Pause button| Press this button to start or pause

the play(CD /USB/Bluetooth mode).

14.| FUN. button| CD-USB-Bluetooth function selector.
15.| A-8 button| A-8 repeat play.
16.| Next button| Short press to skip to the next track. Long press to fast forward.
17.| Internal speaker| Built-in stereo dual speakers.
18.| USS disk port| Insert USS disk for song playback .
19.| Volume control| Push to increase or decrease volume .
20.| CD door open switch| Push to open CD door.

FUNCTION DESCRIPTIONS

POWER SUPPLY
A rechargeable polymer battery is built into the CD player. When found the battery icon no power in LCD display right top corner, it needs to be connected to the external Type-C USB 5V/2A for charging. You can see the battery charging status on the screen and the cable needs to be unplugged after a full charge. It takes about 3-4 hours to fully charge the battery.

HOW TO CONNECT HEADSET
You can use earphones to listen to the music played by the machine. Just plug the 3.5mm headphones into the earphone port, and the speaker will be automatically disconnected at this time.

SLEEP FUNCTION

1. In the power on state, long press the SLEEP button to enter sleep mode, LCD Display screen shows “90” or “OFF” and “SLEEP”.
2. Short press the Previous/Next button to select automatic s u own Ime between OFF-10-20-30-40-50-70-80-90min. Press the SLEEP button again to confirm the setting.
3. When SLEEP mode is in use, the LCD screen disp ays as shown below:

CD DISC/USB DISK MODE

1. After power on, press the Function Selector button (FUN.) to select CD or USB mode.LCD shown as

2. Under CD Mode:

3. Push the OPEN button on the right to open the CD compartment door, and place the disc printing surface upward on the spindle of the CD movement.

4. Then close the CD compartment door completely, otherwise the player will fail to read the disc. And the disc total tracks will show in LCD screen.

5. After a few seconds, the first track will automatically play while the LCD displays the format of the “CD” ‘,etc.

6. Under USB mode:

7. Insert the USB flash disk with songs stored on it into the USB port on the unit to play music.

8. After a few seconds, the first track will automatically play while the LCD displays the format of the “CD”, “MP3”, etc.

9. Push the volume switch to adjust the volume appropriately.

10. Press the Play / Pause button once to temporarily stop playing, and press this button again to resume playing.

11. If you need to stop playing halfway, press the STOP button to stop playing.
    SLEEP

12. During playback, short press the Previous/Next button )to jump to the previous/next song; long press the Previous/Next button to fast rewind or fast forward.

13. Repeat function:

14. In the process of playing CD/USB, short press the repeat button (REP.) once, the current song you listen to will enter into single cycle, and flashing displayed on the LCD as shown in figure a.

15. Short press the repeat button (REP.) twice, if your USB flash drive contains a file directory, it will repeat to play the current folder for you. Displayed on the LCD shown in figure b.

16. Short press the repeat button for the third time, the whole disc will be played repeatedly, and displayed on the LCD as shown in Figure C.

17. Short press the repeat button for the fourth time, the whole disc will be played randomly. Displayed on the LCD as shown in Figure D.

18. Short press the repeat button for the fifth time, the whole disc will be played in intro, which will play first 10s of each song. The display on the LCD as shown in figure e.

19. Press the repeat button for the sixth time to resume to normal playback.

20. Programming Function (When CD/USB is in STOP state)

21. 1. Press the STOP button to stop to play the CD discs/USB.

22. Then short press the PROG. button ( PRoG) on the machine to entry the programming interface.

23. Press Previous/Next button to select the song you want to program, then press PROG. button( PROG.) to confirm after programming.

24. Press the Play/Pause button to play in the sequence of the programmed songs.

25. A-B Repeat:

26. In the process of playing CD disc/USB, press the A-B button ( A-B) once to mark an A point, then press the A-B(A-B) button again to mark a B point.

27. The unit will repeat playing the audio between point A and point B.

28. Press the button again to cancel the A-B repeat function.

Note : Point A and Point B must be within the same song.

BLUETOOTH MODE

1. Short press the Function Selector button(FUN.) to switch to Bluetooth Mode, (LCD shown as
2. Turn on the mobile phone or other Bluetooth device. When it searches for the local Bluetooth device, the Bluetooth name “CD-’35” will be displayed. After a successful pairing, you will hear a prompt tone.
3. The “bLUE” character on the LCD flashes slowly before connecting to the phone, and the “bLUE” is always on after successful pairing and connection.
4. Press the STOP button to disconnect.

FM TRANSMISSION FUNCTION

1. When playing CD or USB disk , press FM transmission button , LCD will display “FM+FM Frequency (87.5-108MHz) flashing.
2. Then press the Next+ or Previous- button to set a FM frequency, and press FM transmission button again to confirm to the FM transmitting setting.
3. Use an FM receiver (radio or car radio) and turn it to the same frequency you set on the machine. After successfully paired, the CD player sound will playing via the FM receiver.
4. During FM transmission working status, press FM transmission button to cancel FM transmit function.

BLUETOOTH TRANSMISSION FUNCTION

1. When playing CD or USB disk , press Bluetooth transmit button ( *•I) ) , LCD will display
2. When the Bluetooth is under pairing status, it will search Bluetooth devices around for pairing (those with receiving function like Bluetooth speaker/Bluetooth earphone/Bluetooth headphones).
3. Afler pairing, the icon on display screen stops flashing.
4. Press Bluetooth transmit button again to stop Bluetooth transmission.

Note:

1. Before connect the wireless Bluetooth earphone with this player, you need to make sure to disconnect the other electronic Bluetooth device with earphone and set your wireless Bluetooth earphone to the searchable mode.
2. lf you cannot search and connect the Bluetooth device, please restart the Bluetooth or the player.

LINE OUT FUNCTION

When playing CD or USB disk, plug one end of the AUX cable into the LINE OUT port on the unit, and the other end into the speakers, car speakers or other devices for external playback.

SPECIFICATIONS

MP3/WAV/FLA

Bluetooth version| 5.1
Bluetooth transmission and Reception range| WithinB-10 meters is optimum
FM transmission range| Within 3 meters is optimum
Lithium-ion battery| Lithium-ion polymer 3.7V/2000mAh
Power source| DC 5V/2A Type-C charging
Charging voltage| DC5V/2A
Charging time| 4.5 Hour
Endurance time| CD:5Hour USB :7Hour
CD playback sound| 31.5Hz-16kHz ±3dB
Speakers output power| 1.2W+ 1.2W
Size| 146x146x33.5 mm/5.755.751.32in
Weight| 322g /0.71Ib

SAFETY INSTRUCTIONS

Use Environment

1. Do not expose the machine to rain or damp places, and place and use the machine away from bathtubs, washing boxes, swimming pools, etc
2. Do not put any source of danger on the device (for example, objects filled with liquid, or lighted candles).
3. Do not use the machine near heat sources, including radiator pipes, heaters or other appliances that generate heat.
4. Put the machine on a flat surface to use.
5. Be careful not to let solids or liquids enter the body from the product.
6. The machine should not be exposed to water droplets or splashes, and objects filled with liquids such as vases should not be placed on the equipment.

Maintenance
Please place the machine in a well-ventilated place, not in the sun or other places that generate high temperature and humidity. During maintenance, please use a soft cloth moistened with a thinner detergent to wipe the body. Do not use strong solvents such as alcohol, stupid or thinner.

This CD player has full 12-month warranty against manufacturing defects. The warranty period begins form the date of purchase.

WARRANTY

This CD player has full 12-month warranty against manufacturing defects. The warranty period begins form the date of purchase.

PACKING LIST

• CD Player x1
• Type-C Cable x1
• User Manual x1
• Earphones x1
• Storage Bag x1
• AUX Cable x1

RF exposure statement
This equipment complies with the FCC and ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

FCC Warning
This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

IC WARNING
This device contains licence-exempt transmitters) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

FAQ

Q: Can I use the CD-35H in conjunction with other transmitters?
A: No, the CD-35H should not be co-located or operated with any other antenna or transmitter to comply with radiation exposure limits.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>