Foto Electric TWKB100 Mechanical keyboard User Manual

Foto Electric TWKB100 Mechanical keyboard

Product Information

The TWKB100 is a keyboard that can be connected to both Mac and Windows systems via Bluetooth. It features rainbow backlit keys with each line having a different color LED. The keyboard also has multimedia functions that can be accessed using the FN keys.

Multimedia Functions

are running
FN + F4 – Media| FN + F4 – Launch an interface similar to Apple’s iOS
FN + F5 – Previous track| FN + F5 – Keyboard brightness
FN + F6 – Play/ Pause| FN + F6 – Keyboard brightness+
FN + F7 – Next track| FN + F7 – Previous track
FN + F8 – Stop| FN + F8 – Play/ Pause
FN + F9 – Mute| FN + F9 – Next track
FN + F0 – Volume +| FN + F10 – Mute
FN + F11 – Volume-| FN + F11 – Volume+
FN + F12 – Whole keys| FN + F12 – Volume-

The keyboard also supports 14 different backlit modes that can be accessed using various FN key combinations. The brightness and lightning speed of the backlit keys can also be adjusted using the FN keys.

Product Usage Instructions

1. To connect the keyboard to your Mac or Windows system, turn on Bluetooth on your device and press the Bluetooth button on the back of the keyboard. The device name “TWKB100” will be displayed on your device, select it to connect.
2. The keyboard can be switched between Mac and Windows mode by pressing the switch button located on the back of the keyboard.
3. The rainbow backlit keys can be turned on or off using the FN + Del keys.
4. The backlit mode can be changed by pressing FN + Home.
5. The brightness of the backlit keys can be adjusted using FN + and FN + . However, this cannot be done in breathing mode.
6. The lightning speed of the backlit keys can be adjusted using FN + and FN + . However, this cannot be done in constant light mode.
7. Press and hold FN + ESC for 3 seconds to restore the factory settings.

Note: The keyboard complies with part 15 of the FCC Rules and can be used in portable exposure condition without restriction. Any changes or modifications not approved by the responsible party may void the user’s authority to operate the equipment.

• color: Black
• Size:33217747.6mm
• Weight: 719.84g
• Number of keys: 83 keys
• Battery capacity: 2000mAh
• Switch: Blue Outemu switches
• Working Voltage/ Current : 1)BT mode: 3.7V/162.7mA; 2)Wire mode: 5V/270mA
• Charging Cable:1.6m braided Type C cable
• Type: Mechanical keyboard
• Switch button: BT/ OFF/ USB (wired), when switch to BT, then it’s under BT mode, and when switch off, then turn off the keyboard, and when switching to USB, then means it’s working as a wired keyboard

In Bluetooth mode, there is no keyboard action (no keys pressed or scroll wheel), and it goes to sleep after 5 minutes. In wired mode, sleep synchronously with your computer  Under bluetooth mode  Bluetooth can match three devices, corresponding to three different positions of key Q, W and E respectively. In Bluetooth mode, there are two ways to pair Bluetooth connections.

1.  Long press Fn + Q, W and E keys (for 3 seconds) until the blue indicator light blinks slowly and enters the code matching state. After successful connection, this LED will be steady blue and the connection information will be saved in the corresponding key position.
2. Second, short press Fn + Q, W, E the host of the corresponding position (select), USB/bluetooth indicator light blue into rapid flash back to the state (which can be connected to the connection before the host), press the code key at this time, the USB/bluetooth indicator light Blue slow flashing, into the state of code, after the connection is successful, the blue LED normally on, In addition, the connection information is saved in the corresponding position of the key, which can be connected back to the corresponding host by short pressing Fn + W, W, E.
3.  After connecting the corresponding positions of Fn+ Q, W and E to the host, you can switch the connected host by short pressing Fn+ Q, W and E.

Note:

1.  If Fn+Q has been paired with the host, it can be paired with other hosts by long pressing Fn+Q or short pressing Fn+Q and then pressing the pairing button.
2. If the keyboard does not move after the Bluetooth is successfully connected to the host device, the Bluetooth will first go to sleep after 3 minutes. When the key is pressed at this time, there will be a phenomenon of stalling, because the Bluetooth is in the state of connecting back, and it will take some time from the beginning to the success of connecting back.
3. when the USB cable is not connected to the computer and other hosts, the backlight may not be bright, then you can switch the keyboard to Bluetooth mode.
4.  Bluetooth adapter if you have Bluetooth 4.0 version above, and to use in Win10.

when connecting with bluetooth, the device name is showed TWKB100

• Switch button: Mac/ Windows, switch Mac, means working on Mac system, when switching Windows, then working on Windows system
• Backlit: Rainbow backlit, each line with each color LED, from top to bottom, the color is blue/ red/ orange/ green/ purple/ white
• Right roller: is for volume control, turn right is for increasing the volume, turn left is for decreasing the volume
• Left roller: is for brightness control, turn right is for increasing the brightness, turn left is for decreasing the brightness

Compatible with Mac/ Windows, the multimedia function is laser for Mac system
4 indicator light: wired/ bluetooth indicator, winlock indicator, caps lock indicator, charge low battery indicator

Bluetooth Wired Indicator
The blue light of indicator flashes when switching to Bluetooth mode. The LED is always on in blue after a successful connection. The LED is always on in red when switching to wired mode.

Win Lock Indicator
Win Lock function can be turned on or off after pressing FN+Win. Win key has no function when the Win Lock function is turned on (the LED is on). Win key is normal when the Win Lock function is turned off(the LED is off).

Caps Indicator
The LED is always on when the Caps is turned on and the LED is off when the Caps is off.

Charge Low Battery Indicator
Charging blue light on, fully charged blue light off The LED flashes red when the voltage is lower than 3.4V.

Multimedia function of the keyboarrd

running
FN+F4| Media| F4:  Launch an interface similar to Apple’s iOS
FN+F5| Previous track| F5:    Keyboard brightness –
FN+F6| Next track| F6:    Keyboard brightness +
FN+F7| Play/ Pause| F7:    Previous track
FN+F8| Stop| F8:    Play/ Pause
FN+F9| Mute| F9:    Next track
FN+F0| Volume +| F10:    Mute
FN+F11| Volume –| F11:    Volume +
FN+F12| Lock Whole keys| F12:    Volume-

Support 14 backlit modes
Long press FN + ESC for 3 seconds to restore the factory settings, the lighting effects will be switched to constant light mode only in wired mode

• FN+ Del: ON/OFF the light
• FN+Home: switch the backlit modes
• FN+↑: brightness +
• FN+ ↓: brightness-
• FN+←: lightning speed –
• FN+ →: lightning speed+

There is memory function in light effect speed, brightness and mode
Notes: brightness cannot be switches in breathing mode, Speed cannot be switched in constant light mode

FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•  Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>