VANKYO X180 Bluetooth True Wireless Earbuds with Charging Case User Manual

VANKYO X180 Bluetooth True Wireless Earbuds with Charging Case

Please read this manual carefully before use and keep it well for future reference.

IMPORTANT

• For the detailed pairing steps, please refer to page 08-10.
  If you need any further assistance, please contact us at support@ivankyo.com (US&CA)/support.uk@ivankyo.com {UK) according to your country.

• If the original ear tips don’t fit your ears, please refer to page 14 and see how to replace the ear tips.

CAUTIONS

•  Do not try to disassemble the product by yourself, please contact VANKYO for more help.
• Do not use the product in high temperature, and near heat or fire.
• Please use the T ype-C cable provided for charging the product.
•  Please keep the earbuds out of the reach of children to avoid choking hazard for the small parts contained in the product.
• Long time exposure to loud volume may cause hearing damage. It’s advised you adjust the volume to a proper level for use
• For your safety, it’s not recommended to wear the earbud{s) when driving as it may result in distractions.
•  Please always pay attention to the surroundings to avoid potential risks caused by using the product.

PACKING LIST

Note:
If there is any part of your product damaged or missing, please contact VANKYO support team.

PRODUCT OVERVIEW

Charging Case   Earbud

CHARGE

Please charge the Charging Case and Earbuds before your first use.

Charge the Charging Case

• Connect the Type-C Cable into the Type-C Charging Port on the Charging Case.
•  Directly connect the other end into a USB wall outlet; or  connect the other end to a compatible adapter with 5V DC in, then plug it into a socket. It may take around 1-1.5 hour to reach a full charge.

Charging (With the case closing)
The LED Indicators will pulse red slowly.
Fully Charged (With the case closing)
The LED Indicators will turn solid red for 10s, then off.
Battery Levels (Opening the case) Charge the Earbuds
The earbuds will be charged while they are in the Charging Case.

• Align the Charging Pins on the earbuds with the Charging
• Pins on the Charging Slot in the case.
•  Place the earbuds into the case until they magnetically snap

The Explanations of the LED Indicator   Charging
The LED Indicator on the earbud will pulse blue slowly.
Fully Charged
The LED Indicator on the earbud will be off.

POWER ON

Option 1
After opening the Charging Case, the LED indicator will flash blue quickly for 3-5 times.

Option 2
When the earbud is in power-off status, please tap and hold the Touchpad for 2s to power on.

READY FOR PAIRING

After powering on successfully, the LED Indicator on one earbud flashes blue quickly, while the other pulses blue slowly, which indicates they are ready for pairing with the mobile device.

PAIR
Turn on the Bluetooth on your device, search and connect to Alpha Xl80.    The LED Indicators on the earbuds will pulse blue slowly and you will see “Connected” on the mobile device, which indicates a successful connection.

Note:
Please connect the earbuds with a Bluetooth device within 3 mins after powering on, otherwise they will be powered off automatically.

UNPAIR
Option 1
Place the earbuds back in the Charging Case and dose the Case. They will disconnect automatically.
Option 2
Go to the Bluetooth list of your mobile device, select Alpha XlBO and Disconnect to disconnect the earbuds.

FIT THE EARBUD INTO YOUR EAR

• Insert the earbud gently so the ear tip can rest in the opening of the ear canal.
• Gently and slowly adjust the earbud until it securely and  firmly fits in your ear.

FUNCTIONS OF THE EARBUDS

Volume

Activate Voice Assistant
Tap the Touch pad of the Left(L) Earbud three times quickly to wake up the voice assistant.

POWER OFF
Option 1
Place the earbuds into the charging case and close it to power off.

Option 2
The earbuds will be powered off if there is no connection with a Bluethooth device within 3 mins after powering on.

REPLACE THE EAR TIP
We have pre-assembled the ear tip on the earbuds. If the size doesn’t fit your ears, please take off the original ear tip on the earbud, then replace the new one we provided in the package.

SPECIFICATIONS

TROUBLESHOOTING

Ql: How to tell whether the pairing is successful?

•  The LED Indicators on the earbuds pulse blue slowly for every3s.
•  You will see “Connected” on the mobile device.
•  Launch a music App and tap the Touchpad of either earbud once to check if you can play/pause the music.

Q2: Can X180 earbuds be paired with multiple devices?

• Sorry, they can’t. They can only be paired with one device every time.

Q3: Why can’t I seeX180 from my Bluetooth list?

• Check if you have paired the earbuds with another mobile device before. If yes, please go to the interface of Bluetooth, select Xl80 and Forget This Device on that device; or directly turn off Bluetooth on that device to u npair the earbuds. Then close the Charging Case and open it again, X180 will be searched by the other device.

• The earbuds should be paired with a mobile device within  3 mins after powering on; Otherwise they will power off automatically.

Q4: How should I do when the earbud(s) can’t be charged?

• The Charging Case may run out of power. Please charge it for at least one hour, then put the earbud(s) into it to charge.
• Try to take out the earbud(s) and clean the Charging Pins, then put the earbud(s) into the Charging Case to see if the LED lndicator(s) on the earbud(s) pulse(s) blue slowly.
If the earbud(s) still can’t be charged, please directly contact us.

Q5: What should I do when one earbud can’t be powered on?

• Check if the earbud has run out of power. If yes, please place it in the Charging Case and let it charge for around 1 hour.
• Check if the Charging Pins on the earbud and Charging Case are dirty. If yes, please clean them, then place the earbud into the Charging Case to be charged.
  If the earbud still can’t be powered on, please directly contact us.

WARRANTY

VANKYO wireless earbuds have a three-year free warranty. If you encounter any problems or have any questions while using the product, please send us an email to support@ivankyo.com (US&CA)/support.uk@ivankyo.com (UK) according to your country. We look forward to your comments and suggestions so that we can better serve our customers.

FCC Caution
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2.  this device must accept any interference received, including interference that may cause undesired operation.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
ISEDC Warning
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1.  this device may not cause interference, and
2.   this device must accept any interference, including interference that may ea use undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance.

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment.

NOTES:

1. High Sound Pressure
2. Hearing Damage Risk
3.  Do not listen at high volume levels for long periods.

Manufacturer
Shenzhen VanTop Technology & Innovation Co., Ltd. Manufacturer address:
502, 5th Fir. BLDG 4, MinQi Technology Park, No. 65 Lish an Road, Taoyuan Street, Nanshan District, Shenzhen, China

BellaCocool GmbH
Petten koferstrar..e 18,10247, Berlin, Germany
info@bellacocool.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>