INFACO SC160P3 1300W Electric Saw Instruction Manual

INFACO SC160P3 1300W Electric Saw Instruction Manual

PW3, a multi-function handle

Hand tools

Pole tools

Compatible tools

Precautions before use

WARNING. Read all the safety warnings and all the instructions. Failing to heed warnings and follow instructions may lead to an electric shock, a fire and/or serious injury.

Keep all warnings and instructions for future reference. The term “tools” in the warnings refers to your battery powered electric tool (with power cord), or your tool operating on a battery (without power cord).

Personal protection equipment

| Read the instructions for use carefully, especially the safety instructions.
---|---
| The wearing of a hard hat, eye and ear protection is MANDATORY
| Hand protection using cut-prevention work gloves.
| Foot protection using safety footwear.
| Face protection using a visor
| Body protection, using cut protection overalls.
| IMPORTANT! Extensions can be made of conductive materials. Do not use near sources of electricity or electric wires
| IMPORTANT! Do not approach any part of the body to the blade. Do not remove the cut material or hold the material to be cut while the blades are moving.

Protection of the environment

Observe all country-specific waste disposal rules and regulations.

• Power tools must not be disposed of with household refuse.
• The device, accessories and packaging must be taken to a recycling centre.
• Ask the approved INFACO dealer for up-to-date information on the ecocompatible elimination of waste.

General product view

Specifications

These specifications are given as an indication only. Under no circumstances may they be considered as contractually binding. They are subject to modification without prior notice in the interests of product development.

Patented equipment

Compatible batteries

First use

The first time you use the equipment, we strongly recommend you to ask the advice of your dealer, who is qualified to give you all the advice you need for correct use and optimum performance. It is imperative to carefully read the tool and accessory user manuals before handling or powering up the tool.

Installation and connection

Only use INFACO brand batteries with a 48 Volt power supply.

Any use with batteries other than INFACO batteries may lead to damage. The warranty on the motorized handle will be void if batteries other than those manufactured by INFACO are used.

In wet weather, it is imperative to carry the battery belt under waterproof clothing to keep the battery unit protected from the rain.

Mounting the handle

Using the machine

> It is IMPERATIVE to fit the blade cover.

Mounting the saw on the handle

Tighten the wing nut

> Connect the battery > Connect the power cable

First start-up

• 1st start-up: 2 short presses on the trigger = ON
• Exit from standby mode: 2 short presses on the trigger = ON
• Normal operation: 1 long press on the trigger = ON
• Trigger release: OFF

It is mandatory to hold it with bovth hands

Assembly on a pole

Tighten the wing nut

Tool gap adjustment

It is imperative to disconnect the machine.

Precautions for use and safety

It is mandatory to hold it with both hands

Travail en hauteur

Warning about risks when working at heights using a ladder.
High-risk work configuration not recommended.

We recommend the use of the extension (option) for all work at heights. In order to prevent any risk of falls and other accidents.

Storage and transport

When storing and transporting the chainsaw, we recommend draining off the oil and storing the tool in a box, as oil seepage can occur.

It is IMPERATIVE to fit the blade cover and disconnect the power cord for storage and transport

For the transport, storage, servicing, maintenance of the tool, or any other operations not related to tool function operations, it is imperative to disconnect the device.

Servicing and maintenance

All servicing and maintenance operations must be carried out with the tool disconnected from all power sources:
Adapt the servicing frequencies to your tool use.
Occasional use, space out the frequency. Intensive use, increase the frequency.

| Before starting work| At the end of the day| Each time the battery is charged| Once per week| Once per month| Once per year| In the event of damage| In the event of a malfunction| When necessary
---|---|---|---|---|---|---|---|---|---
Complete machine| Visual inspection of its condition|

|  |  |  |  |  |  |  |
Cleaning|  |  |  |  |  |  |  |  |
Inspection by the dealer|  |  |  |  |  |  |  |  |
Accessory assembly| Cleaning and lubrication|  |  |  |  |  |  |  | |
Saw blade gap| Inspection|  |  |  |  |  |  |  |  |
Adjust|  |  |  |  |  |  |  |  |
Saw blade| Visual inspection of its condition|  |  |  |  |  |  |  | |
Cleaning|  |  |  |  |  |  |  |  |
Replacement|  |  |  |  |  |  |  |  |
Saw head| Gap check|  |  |  |  |  |  |  |  |
Lubrication|  |  |  |  |  |  |  |  |
Inspection by the dealer|  |  |  |  |  |  |  |  |
Power cord| Visual inspection of its condition|  |  |  |  |  |  | |  |
Battery| Visual inspection of its condition|  |  |  |  |  |  |  | |
Vest| Visual inspection of its condition|  |  |  |  |  |  |  |  |
Handle| Visual inspection of its condition|  |  |  |  |  |  |  |  |

Changing the blade

It is imperative to disconnect the machine from the battery

New saw blade
SCP3 SCP4 SCP4S

Only use POWERCOUP blades specific to the saw.

Blade gap

Cleaning and lubrication

Zone to be lubricated

Safety instruction

IMPORTANT. To reduce the risk of electric discharges, injuries and fire when using electric tools, follow the fundamental safety measures indicated below. Read and follow these instructions before using the tool, and keep the safety instructions!

Outside operations related to the use of the tool, your tool and its accessories must be disconnected and stored in their relevant packaging.

It is imperative to disconnect your tool from all power sources for the following operations:

• Servicing.
• Battery charging.
• Maintenance.
• Transport.
• Storage.

When the tool is running, always remember to keep the hands away from the accessory head being used. Do not work with the tool if you are tired or feeling unwell. Wear the specific recommended personal protection equipment for each accessory. Keep the equipment out of the reach of children or visitors.

Do not use the tool if there is a risk of fire or explosions, for example in presence of flammable liquids or gases.

Never carry the charger by the cord, and do not pull on the cord to disconnect it from the socket.

Keep the cord away from heat, oil and sharp edges.

Never use the tool at night or in bad light without setting up additional lighting. When using the tool, keep both feet on the ground and keep as much balance as possible.

Caution: extensions can be made of conductive materials. Do not use near sources of electricity or electric wires.

Warranty conditions

Your tool has a two year warranty for manufacturing defects or faults.

The warranty applies to the normal use of the tool and does not cover:

• damage due to poor maintenance or lack of maintenance,
• damage due to incorrect use,
• wear parts,
•  tools that have been taken apart by unauthorised repairers,
• external factors (fire, flood, lightning, etc.),
• impacts and their consequences,
• ltools used with a battery or charger other than those of the INFACO brand.

The warranty is only applicable when the warranty has been registered with INFACO (warranty card or online declaration on www.infaco.com).

If the warranty declaration was not made when the tool was purchased, the factory departure date will be used as the warranty start date.

The warranty covers factory labour but not necessarily dealer labour. The repair
or replacement during the warranty period does not extend or renew the initial warranty.

All failings regarding the storage and safety instructions will void the manufacturer’s warranty.

The warranty cannot entitle to compensation for:

The possible immobilisation of the tool during repairs.

All work carried out by a person other than approved INFACO agents will cancel the tool warranty.

The repair or replacement during the warranty period does not extend or renew the initial warranty.

We strongly recommend INFACO tool users to contact the dealer that sold them the tool in the event of a failure.

To avoid all disputes, please note the following procedure:

• Tool still under warranty, send it to us carriage paid and we will pay the return.
• Tool no longer under warranty, send it to us carriage paid and the return will be at your expense by cash on delivery. If the cost of the repair were to exceed € 80 excluding VAT, you will be supplied with a quote.

Advice

• Keep your work area tidy. Clutter in work areas increases risks of accidents.
• Take into account the work zone. Do not expose electric tools to rain. Do not use electric tools in a damp or wet environment. Make sure the work area is properly lit. Do not use electric tools near inflammable liquids or gases.
• Protect yourself from electric shocks. Avoid bodily contact with surfaces connected to the earth, such as battery chargers, electric multi-plugs, etc.
• Keep away from children! Do not allow third parties to touch the tool or cable. Keep them away from your work area.
• Store your tools in a safe location. When not in use, tools must be stored in a dry, locked location in their original packaging and out of the reach of children.
• Wear suitable work clothing. Do not wear loose-fitting clothing or jewellery. It could be caught up in moving parts. When working in the open air, wearing rubber gloves and nonslip sole footwear is recommended. If your hair is long, wear a hair net.
• Wear protective eye-wear. Also wear a mask if the work being carried out generates dust.
• Protect the power cord. Do not carry the tool using its cord and do not pull on the cord to disconnect it from the socket. Protect the cord from heat, oil and sharp edges.
• Maintain your tools carefully. Regularly check the plug and power cord condition and, if they are damaged, have them replaced by a recognised specialist. Keep your tool dry and free of oil.
• Remove the tool keys. Before starting the machine, make sure the keys and adjustment tools have been removed.
• Check your tool for damage. Before reusing the tool, carefully check that the safety systems or slightly damaged parts are in perfect working order.
• Have your tool repaired by a specialist. This tool is compliant with applicable safety rules. All repairs must be carried out by a specialist and only using original parts, failure to do so could result in serious risks to user safety.

Troubleshooting

refit the blade following the procedure
Blade gap too big| Adjust the blade gap by following the procedure and contact the dealer if necessary
Poor cuts| Blade wear| Replace the worn blade by following the procedure.
Noise in the extension| Extension guide damaged| Contact your dealer.
The machine will not start| Battery discharged| Recharge the battery
No power supply| Re-connect the machine.
Other| Contact your dealer.
Unexpected machine stoppages| Too much pressure on the branches| Do not force on the machine.
Battery discharged| Recharge the battery.
Branches too thick| Cut thinner branches

Dealer part

Part to be kept by the dealer.

Serial number > ____
Ref > ____
Name >
First name > ____
Company name >
Full address > _
City > ____
Postcode > ___
Phone number > ____
Purchase date > //
Remarks > ___
Customer signature> ____

To be returned to infaco

To validate the warranty, REGISTER IMMEDIATELY ONLINE ON :
www.infaco.com, your warranty declaration or send this form filled out
IN BLOCK CAPITALS AS SOON AS THE TOOL IS PURCHASED.

Name >
Prénom >
Company name> ____
Full address > __
City > __
Postcode > __
Phone number > ____
Email > __
Purchase date > /_/___
Serial number >- Ref > ___
Remarks > ____

Equipment manufactured in france

• Manufacturer > INFACO S.A.S. – 81140 CAHUZAC-SUR-VÈRE (FRANCE)
• Type > POWERCOUP PW3 SC160
• Ref > SC160P3
• Weight with handle > 2100g
• Maximum power > 1300 W
• Battery rated voltage > 48 Volts

These specifications are given as an indication only. Under no circumstances may they be considered as contractually binding.They are subject to modification without prior notice in the interests of product development.

Customer service

INFACO S.A.S.
Bois de Roziès
81140 CAHUZAC-SUR VERE France
Phone: (+33) 05 63 33 91 49 –
Fax: (+33) 05 63 33 95 57
Email: contact@infaco.fr
Technical videos available on the website: www.infaco.com

References

• INFACO - Fabricant français de sécateurs électriques professionnels

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>