COMFAST CFWP1300 Wireless Adapter Installation Guide
- June 5, 2024
- COMFAST
Table of Contents
COMFAST CFWP1300 Wireless Adapter
Hardware Installation
-
Turn off the desktop PC and disconnect the power.
-
Open the main chassis, select an empty PCI-E slot on the motherboard, and remove the corresponding slot on the rear panel of the PC.
-
Insert the PCI-E NIC into the selected PCI-E slot and verify that all NIC pins are in contact with the slot; then secure the NIC to thechassis with screws; finally close
the chassis -
Plug in the PC again and turn on the PC.
Supported Operating Systems:
- Support for Windows 7/8.1/10 operating system
- Does not support WindowsXP/8, MAC OS operating system
Driver Installation
- Put the CD driver into the computer drive.
- Double-click the drive letter, open the corresponding driver folder, double-click “Setup.exe” to run the installer, you can complete the installation. (Note: If the installation file is a compressed package, you need to extract it to install it)
Maintenance Regulations
Dear Valued Clients,
Thank you for purchasing coMFRST Products. To protect your rights and
interessts in after-sales service, please read the following maintenance
regulations.
The following does not belong to free maintenance ,our company can provide
paid service,please note: Failure to require the installation manual, use ,
maintenance, storage led to product failure or damage Beyond the limited
warranty, the warranty period; Unautorized alteratiion, tearing up the product
bar code; Without authorization to change the settings file or inherent
disassemble;
Unexpected factors or human actions lead to product damage, such as improper
input voltage, temperature, water mechanical damage, break, rust or oxidation
product
of serious,etc; Other non-product itself, design ,technology, manufacturing.
quality and other quality problems by the failure damage.
Customer Data
- Name
- Address
- Model
- MAC No.
- Machine unit sales
- Sale of machine address
- Date of sale machine
- TEL
- Post Code
- Invoice No.
Copyright Information Statement
Shenzhen Four Seas Global Link Network Technology CO.,Ltd.Company all rights reserved.
- Without ours official writ permission, no unit or individual shall be copied, reproduced, transcribed or translated in part or whole book. In any form or by any means(electronic, mechanical,printing.recording cr other possible means)or for the propagation of goods any commercial, profitable purposes.
- COMFAST is the registered trademark of Shenzhen Four Seas Global Link Network Technology Co.,Ltd.Company. All other trademarks or registered trademarks mentioned in this document, by respective owners.
- Product specifications and information meant manual are tor rererence on subject to updates WItnout notice. Unless there are other special agreed, this manual is used only as a user guide. AIl statements, information, etc. are not constitute any form of guaranted in this
Manufacturer: Shenzhen Four Seas Global Link Network
Technology Co.,Ltd.company
Address: Room 607-610,Block B Tao JINDI Electronic
Business Incubation Base, Tenglong Road, Longhua
DIstrict,Shenzhen, China
Hotline: +86 755 83790059
Website: en.comfast.com.cn
Warning:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: () this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This cquipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the cquipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Conncct the cquipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an expericncecd radio/TV tcchnician for help.
NOTE: This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This ecquipment
should be installed and operated with minimum distance of 20cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>