COMFAST CF-951AX Wireless USB Adapter Installation Guide
- June 4, 2024
- COMFAST
Table of Contents
CF-951AX Wireless USB Adapter
Installation Guide
Hardware installation
There are two ways to install the network card;
Note: The picture is a simplified schematic diagram, please refer to the
actual product for details.
- Insert the network card directly into the USB port of the computer;
- Connect the computer USB port through the USB extension cord base (USB extension base needs to be purchased separately);
Note: When using a desktop computer, it is recommended to use a USB extension cord base to connect to the port on the back of the computer case (some desktop ports have an insufficient power supply or cannot be used), and extend it to the Desktop computer USB ports.
Driver Installation
2-1 Open the driver folder and select the corresponding driver according to the system version, for example, double-click comfiest setup x64.exe on a 64-bit system to open the installer; (If there is no CD-ROM driver, please go to the official website http://www.sz-comfast.com to download and install the driver)
2-2 Then the driver will Automatically install.
2-3 After the installation is completed, it is recommended to restart the
computer. If there is work in progress or files being written, you can restart
it later. If there is nothing else, it is recommended to restart immediately;
2-4 After restarting, the driver installation is complete, you can move the
mouse to My Computer, right-click and select Manage to enter the management
interface to view the driver status:
2-5 After entering the management page, click
Device Manager, Network Adapter, in turn, you can see the installed network
card driver (Note: This step requires the network card to be connected to
the computer to see it.)
2-6 Double-click to view the device details. If there is no abnormality, the
driver is running normally as shown in the figure below and the driver details
can be viewed:
Network connection settings
3-1. After confirming that the driver is installed correctly, you can double-
click the wireless network card icon in the lower right corner, and click the
icon with the left mouse button. The computer will display the connectable
wireless 3-2. Click the wireless network you want to connect to and enter the
password to connect.
Network connection status
4-1. After the network is connected, the computer system icon will change to ,
and then you can right-click the icon and select “Open “Network and Internet”
settings” to enter the setting selection interface.
4-2 Click the “Wi-Fr option and then click Show connected wireless, you can
view the current IP, MAC address, gateway, driver version, etc. of the
wireless.
Maintenance Regulations
Dear Valued Clients,
Thank you for purchasing the products. To protect your rights and interests in
after-sales service, please read the following maintenance regulations.
The following do not belong to free maintenance, our company can provide
paid service, please note:
- Failure to require the installation manual, use, maintenance, and storage led to product failure or damage;
- Beyond the limited warranty, the warranty period; Unauthorized alteration, tearing up the product bar code;
- Without authorization to change the settings file or inherent disassemble;
- Unexpected factors or human actions lead to product damage, such as improper input voltage, temperature, water mechanical damage, break, rust or oxidation product of serious, etc;
- The damage caused by the transportation, loading, and unloading caused by the customer’s return for repair; the product failure or damage caused by force majeure such as earthquake, fire, lightning, etc.; Other non-product itself, design, technology, manufacturing, quality and other quality problems caused by the failure damage.
Customer Data
Name|
---|---
Address|
Model|
MAC No.|
Machine unit sales|
Sale of the machine address|
Date of sale machine|
TEL|
Post Code|
Invoice No.|
Copyright Information
Statement
Shenzhen Four Seas Global Link Network
Technology CO., Ltd.
The company has all rights reserved.
Without our official writ permission, no unit or individual shall be copied,
reproduced, transcribed, or translated in part or whole book. In any form or
by any means(electronic, mechanical, printing, recording, or other possible
means)or for the propagation of goods for any commercial, profitable purposes.
is the registered trademark of Shenzhen Four Seas Global Link Network
Technology Co., Ltd.Company. All other trademarks or registered trademarks
mentioned in this document are by respective owners.
Product specifications and information mentioned in this manual are for
reference on subject to updates without notice. Unless there are other special
agreements, this manual is used only as a user guide. All statements,
information, etc. are not constituted any form of guarantee
Manufacturer: Shenzhen Four Seas Global Link Network Technology Co.,
Ltd.Company
Address: Room 607-610, Block B Tao JINDI Electronic Business Incubation
Base, Tenglong Road, Longhua District, Shenzhen, China
Hotline: +86 755 83790059
Website: www.comfast.cn /
www.szcomfast.com
FCC Caution:
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
The device has been tested and complies with FCC SAR limits.
And keep the device minimum of 5mm from the body when normally used.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>