milwaukee 48-59-1815 Dual Bay Simultaneous Super Charge Instruction Manual

: July 26, 2024
: Milwaukee

Table of Contents

milwaukee 48-59-1815 Dual Bay Simultaneous Super Charge
Product Information
Product Usage Instructions
FUNCTIONAL DESCRIPTION
SPECIFICATIONS
SYMBOLOGY
BATTERY OPERATION
CHARGER OPERATION
MAINTENANCE
LIMITED WARRANTY USA & CANADA
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

milwaukee 48-59-1815 Dual Bay Simultaneous Super Charge

Product Information

Specifications

Brand: MILWAUKEE
Product Type: Li-Ion Charger and Batteries
Safety: Important safety instructions provided
Compatibility: Designed for use with MILWAUKEE Li-Ion products

Product Usage Instructions

Safety Precautions

Read and understand the operator’s manual before use.
Only use recommended MILWAUKEE Li-Ion batteries and chargers.
Avoid using damaged or counterfeit batteries.
Keep batteries away from children and dangerous environments.
Avoid exposure to moisture, wet locations, and explosive atmospheres.

Charging Guidelines

Charge batteries in a well-ventilated area within the recommended temperature range.
Avoid blocking vents to ensure proper ventilation.
Do not expose charging batteries to open flames or smoking.

Battery Handling

Do not disassemble or attempt to repair batteries or chargers.
Avoid short-circuiting the battery pack by preventing contact between positive and negative contacts.
Avoid allowing fluids to flow into the battery pack as it can cause a short circuit.

Frequently Asked Questions (FAQ)

Q: Can I use non-MILWAUKEE batteries with the charger?
A: No, only use MILWAUKEE Li-Ion batteries with the charger to ensure safety and optimal performance.
Q: What should I do if a battery leaks chemicals?
A: If a damaged battery leaks chemicals, use rubber or neoprene gloves to dispose of it. If skin is exposed, wash with soap and water and rinse with vinegar. Seek medical attention if eyes are exposed to battery chemicals.
Q: How should I handle a short-circuited battery pack?
A: A short-circuited battery pack can cause fire and personal injury. Avoid short circuits by preventing metal objects from making a connection between the positive and negative contacts on the battery pack.

OPERATOR’S MANUAL
New batteries must be charged before first use.

Cat. No. / No de Cat.
48-59-1815
M18™ DUAL BAY SIMULTANEOUS SUPER CHARGER
M18™ LITHIUM-ION BATTERY PACKS

WARNING To reduce the risk of injury, user must read and understand operator’s manual.

IMPORTANT SAFETY INSTRUCTIONS
– SAVE THESE INSTRUCTIONS –

WARNING READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

SAVE THESE INSTRUCTIONS – This manual contains important safety and operating in-structions for the MILWAUKEE Li-Ion charger and MILWAUKEE Li-Ion batteries.
Before using the battery and charger, read this operator’s manual, tool’s operator’s manual, and all labels on the battery, charger and tool.
CAUTION Use MILWAUKEEonly on recommended Li-Ion batteries MILWAUKEE Li-Ion products. Do not use counterfeit, aftermarket, or “knockoff” batteries or chargers. Other battery types could explode. Do not wire a battery to a power supply plug or car cigarette lighter.
Keep batteries out of the reach of children.
Avoid dangerous environments. Do not expose to or charge in rain, moisture, snow, damp, or wet locations. Do not use battery or charger in the presence of explosive atmospheres (gaseous fumes, dust or flammable materials). Sparks may be generated when inserting or removing battery, possibly causing fire.
Only charge in a well ventilated area and within the Recommended Ambient Charging Temperature range. Do not block vents; keep them clear for proper ventilation. Do not allow smoking or open flames near a charging battery. Vented gases may explode.
Maintain charger cord. Pull plug rather than cord to unplug. Never carry charger by its cord. Keep cord from heat, oil and sharp edges. Ensure cord will not be stepped on, tripped over, damaged, or stressed. Do not use charger with damaged cord or plug. Replace damaged cords immediately.
Avoid using an extension cord when possible. When unavoidable, use an extension cord in good electrical condition with the proper wire gauge and length for the current rating of the charger. The pin size and shape must match the pins on the charger cord.
Charger is rated for 120-127 V AC ONLY. Charger must be plugged into an appropriate receptacle.
Use only recommended attachments.
Unplug charger and remove batteries when not in use.
Always unplug charger before cleaning or maintenance. Do not allow water to flow into AC/DC plug. Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock hazards.
Do not burn, incinerate, or expose batteries to fire or excessive temperatures above 265°F (130°C). Batteries may explode. Toxic fumes and materials are created when batteries are burned.
Do not crush, drop, shred, modify, or damage battery. Always securely contain batteries during transport. Do not use a battery that has received a sharp blow, been dropped, run over, or damaged in any way (e.g., pierced with a nail, hit with a hammer, stepped on, in a vehicle accident).
Do not use or charge batteries that appear damaged or swollen, or are not functioning properly. Damaged or modified batteries may exhibit unpredictable behavior
Do not disassemble or attempt to repair batteries or chargers. No internal serviceable parts. Take batteries/chargers that have been damaged, broken, or need repair to a MILWAUKEE service facility to ensure the safety of the product is maintained.
Battery chemicals cause serious burns. Never allow contact with skin, eyes, or mouth. If a damaged battery leaks battery chemicals, use rubber or neoprene gloves to dispose of it. If skin is exposed to battery fluids, wash with soap and water and rinse with vinegar. If eyes are exposed to battery chemicals, immediately flush with water for 20 minutes and seek medical attention.
Do not short circuit. A short-circuited battery pack may cause fire, personal injury, and product damage. A battery pack will short circuit if a metal object makes a connection between the positive and negative contacts on the battery pack. Do not place a battery pack near anything that may cause a short circuit (e.g., coins, keys, nails, or small metal objects in a pocket, toolbox, or drawer).
Do not allow fluids to flow into battery pack. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit. Do not use battery packs that have been exposed to these types of fluids.
Battery packs marked as Resistant are suitable for environments where incidental contact or exposure to oils, greases, and solvents can occur. These packs are not resistant to acids or other corrosive chemicals. Never immerse or allow fluids to penetrate the battery pack.
Always use a side handle when using a HIGH OUTPUT or HIGH DEMAND battery pack 6.0 Ah or above; the output torque of some tools may increase. If your drill/driver did not come with a side handle, visit the MILWAUKEE TOOL website for the appropriate accessory handle.
Store the battery pack and charger in a cool, dry place. Do not store where temperatures may exceed 120°F (50°C) such as in direct sunlight, a vehicle, or metal building during the summer.
Always ship Li-Ion batteries in accordance with the current regulations governing the chosen mode of transport (e.g. ground, air, sea). When in doubt, contact MILWAUKEE, the carrier or other trained Dangerous Goods professional to determine applicable regulations.
Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a replacement.

FUNCTIONAL DESCRIPTION

Cord
COOL-CYCLE™ vents
CHARGE ADAPT™ light indicators:
Solid white: Super charging
Bays
Battery contacts
Charge light indicators
Release buttons
Rapid charge-capable pack indicator
Fuel gauge button
Fuel gauge

SPECIFICATIONS

Charger Cat. No. ……………………………48-59-1815
Input Volts……………………………………….120-127 AC
Max Input Amps……………………………………………4 A
Output Volts……………………………………………18 DC
Max Output Amps……………………………………….19 A
Recommended Ambient
Charging Temperature………………..40°F to 104°F (5°C à 40°C)
M18™ Li-Ion Battery Packs…………………18 V DC

SYMBOLOGY

BATTERY OPERATION

Fuel Gauge
Compared to NiCd battery pack types, MILWAUKEE Li-Ion battery packs deliver fade-free power for their entire run time. The tool will not experience a slow, gradual loss of power during use.
Use the fuel gauge Approximate Run to determine the Time Remaining battery pack’s maining run time.
Press the fuel gauge button to display the lights. The fuel gauge will light up for 2-3 seconds.
To signal the end Less than of discharge, 1 light if bottom light is flashing on the fuel gauge will flash quickly for 2-3 seconds and the tool will not run. Charge the battery pack. An alternating blinking pattern indicates that an error or overtemperature state was encountered. Allow the battery pack to cool and reinsert. If the pattern continues, contact a MILWAUKEE service facility. If the fuel gauge doesn’t appear to be working, place the battery pack on the charger and charge as needed.
Immediately after using the battery pack, the fuel gauge may display a lower charge than it will if checked a few minutes later. The battery cells “re- cover” some of their charge after resting.

Battery Pack Protection
To protect itself from damage and extend its life, the battery pack’s intelligent circuit monitors current draw and temperature. In extremely high torque, binding, stalling, and short circuit situations, the battery pack will turn OFF the tool if the current draw becomes too high. All the fuel gauge lights will flash. Release the trigger and restart.
Under extreme circumstances, the internal temperature of the battery could become too high. If this happens, the fuel gauge lights will flash in an alternating pattern and the product will not run. Allow the battery to cool down.

Fuel Gauge

Lights

| Diagnosis| Solution
---|---|---
Lights 1 – 4 Solid| Remaining run time| Continue working
1 Light, flashing slowly| Less than 10% run time left| Prepare to

charge pack

Cold Weather Operation
MILWAUKEE Li-Ion battery packs are designed to operate in temperatures below freezing. When the battery pack is too cold, it may need to warm up before normal use. Put the battery on a product and use the product in a light application.
It may “buzz” for a short time until it warms up. When the buzzing stops, use the tool normally.
Transport
The regulations pertaining to the transport of Li-Ion batteries are affected by whether the battery is transported in a personal vehicle or offered for shipment via a commercial carrier. Always ship Li-Ion batteries in accordance with the current regulations governing the chosen mode of transport (e.g. ground, air, sea). When in doubt, contact MILWAUKEE, the carrier or other trained Dangerous Goods professional to determine applicable regulations.
The personal transport of Li-Ion battery packs is allowed when done in accordance with these warnings and instructions. When shipping Li-Ion batteries with a commercial carrier, they are shipped under classification UN 3480 (battery only) or UN 3481 (batteries contained in or packed with equipment). The proper packaging, labeling, marking, and documentation requirements are generally dependent upon whether the particular batteries are rated greater than or less than 100 Wh. Often, Li-Ion batteries rated 100 Wh or less are “excepted” from certain shipping regulations. In the U.S., products shipped via ground transport may be “excepted” from certain hazardous material shipping regulations if they are under 300Wh.

WARNING To reduce the risk of injury or explosion, never burn or incinerate a battery pack even if it is damaged, dead, or completely discharged. When burned, toxic fumes and materials are created.

Disposing of MILWAUKEE Li-Ion
Battery Packs
MILWAUKEE Li-Ion battery packs are more environmentally friendly than some other types of battery packs (e.g., nickel-cadmium). Always dispose of battery packs according to federal, state and local regulations. Contact a local recycling agency for recycling locations.
Even discharged battery packs contain some energy. Before disposing, use electrical tape to cover the terminals to prevent the battery pack from shorting, which could cause a fire or explosion.

RBRC Battery Recycling Seals
The RBRC™ Battery Recycling Seals (see the Symbology section) on battery packs indicates that MILWAUKEE has arranged for recycling with the Re-chargeable Battery Recycling Corporation (RBRC). At the end of its useful life, return the battery pack to a MILWAUKEE Branch Office/Service Center or a participating retailer. For more information, visit the RBRC website at www.rbrc.org.

CHARGER OPERATION

WARNING Charge only MILWAUKEE M18™ Li-Ion batteries in this MILWAUKEE Li-Ion charger. Other types of batteries may cause personal injury and damage.

When to Charge the Battery Pack with this MILWAUKEE Charger
Remove the battery pack from the product for charging when convenient for you and your job. MILWAUKEE batteries do not develop a “memory” when charged after only a partial discharge. It is not necessary to run down the battery pack before placing it on the charger.

Use the fuel gauge to determine when to charge your MILWAUKEE Li-Ion battery pack.
The battery pack’s charge can be “Topped-Off” before starting a big job or long day of use.
You can “Top-Off” your battery pack’s charge before starting a big job or long day of use.
The only time it is necessary to charge the MILWAUKEE Li-Ion battery pack is when the battery pack has reached the end of its charge. To signal the end of charge, power to the product will drop quickly, allowing enough power to finish the operation. Charge the battery pack as needed.

How to Charge the Battery Pack
Align the battery pack with the bay and slide the battery pack into the charger as far as possible. The COOL-CYCLE™ fans will turn on. The red light will come on, either flashing quickly (battery pack or charger is too hot or cold), flashing slowly (communication between pack and charger) or continuous (pack is charging).

Charge time depends on capacity of battery pack. Heavily cycled batteries may take longer to charge completely.
Super charge occurs when the battery pack is charging above 9 A. The CHARGE ADAPT™ light indicator will illuminate when a battery pack is super charging. If charging two battery packs capable of 12 amp charging, the charger will charge the first pack at 12 A, and the second battery pack will charge at 7 A. Once the first battery pack is fully charged (charge indicator light is solid green), the second battery pack will charge at up to 19 A until it’s fully charged.
The fuel gauge lights are displayed as the pack is being charged, indicating how fully charged the pack is. The fuel gauge will turn off when charging is complete.
On M18™ battery packs, the fuel gauge lights are displayed as the pack is being charged, indicating how fully charged the pack is. The fuel gauge will turn off when charging is complete.
After charging is complete, the continuous green light will come on.
The charger will keep the battery pack fully charged if it is left on the charger. The light indicator will be same as normal charging.
The second pack inserted in the charger will be-gin charging when the first pack inserted is fully charged.
The next pack inserted in the charger will begin charging when the previous pack is fully charged. To skip a pack and move on to the next, press the skip button.
If the light indicator flashes red and green or does not come on, check that the battery pack is fully seated into the bay. Remove the battery pack and reinsert. If the problem persists, remove pack(s) and unplug charger for at least 2 minutes. After 2 minutes, plug charger back in and insert pack. If the problem continues, contact a MILWAUKEE service facility.
If the light indicator double blinks red slowly (while no pack is inserted), one or more fans are damaged. The battery pack will not cool while charging, and will charge at a reduced rate. Contact a MILWAUKEE service facility.

Charging a Hot or Cold Battery Pack
The charger has advanced electronics that adjust the charge rate based on battery temperature. Hot or cold batteries may take longer to charge. When the battery pack temperature is outside the normal charging range, the red light will flash and the battery will not charge. Once the battery pack is within the acceptable range, normal charging will take place and the red light will be continuous. This optimizes charge time and battery life.

Battery Pack

Temperature

| Red Charger

Indicator Light

| Charging

Status

---|---|---
Too Hot| Fast Flashing| Not charging
Normal Range| Continuous| Normal charging
Too Cold| Fast Flashing| Not charging

COOL-CYCLE™ Fans

The COOL-CYCLE™charger is designed to cool the battery packs while charging.
For best results, COOL-CYCLE™ capabilities are best paired with COOL-CYCLE™ capable battery packs.
Once battery pack is inserted, the COOL-CYCLE™ fans will turn on and may continue cooling the battery pack after it is charged.
The COOL-CYCLE™ fans may not turn on or spin slower if the battery pack is cool.
Some older battery packs may cause fans to run continuously. This is normal and will not damage the battery pack or charger.
If the charge light indicators slowly pulse red with no battery pack installed, the COOL-CYCLE™ fan is damaged, contact a MILWAUKEE service facility.

Powering the Charger with an Inverter or Generator
The charger will operate with most 120-127 V generators and inverters rated at 500 Watts or higher.

Mounting to the Wall
Use the wall mount guides to mark the hanging points.

MAINTENANCE

WARNING To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse a tool, battery pack or charger in fluid or allow a fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach containing products, etc., can cause a short circuit.
Always unplug the charger and remove the battery from the charger before performing any maintenance. Never disassemble the battery or charger. Contact a MILWAUKEE service facility for ALL repairs.
Do not expose battery packs, chargers or tools to fluids, water, or rain, or allow them to get wet. This could damage the tool, charger, and/or battery pack. Clean out dust and debris from tool, charger and bat-tery vents and electrical contacts by vacuuming or brushing. Clean housings with a damp, soapy cloth, keeping away from all electrical contacts. Certain cleaners and solvents, such as gasoline, turpentine, lacquer thinner, paint thinner, bleach, chlorinated cleaning solvents, ammonia and household detergents containing ammonia, are harmful to plastics and other insulated parts; plastic casings will become brittle and crack. Never use flammable or combustible solvents around batteries, charger, or tools.

Storage
As a general practice, it is best to unplug chargers and remove battery packs when not in use, however, no damage to the battery pack will occur. Store at room temperature away from moisture. Store bat-teries upright. Do not store in damp locations where corrosion of terminals may occur. Storing in high temperatures (over 120°F) for long periods can result in permanent capacity loss for any battery. Charge before use after storing for long periods.

Repairs
No serviceable parts.

SERVICE – UNITED STATES
1-800-SAWDUST (1.800.729.3878)
Monday-Friday, 7:00 AM – 6:30 PM CST or visit www.milwaukeetool.com

Contact Corporate After Sales Service Technical Support with technical, service/repair, or warranty questions.
Email: metproductsupport@milwaukeetool.com
Become a Heavy Duty Club Member at www.milwaukeetool.com to receive important notifications regarding your tool purchases.

SERVICE – CANADA
Milwaukee Tool (Canada) Ltd
1.877.948.2360
Monday-Friday, 7:00 AM – 4:30 PM CST
or visit www.milwaukeetool.ca

LIMITED WARRANTY USA & CANADA

Every MILWAUKEE Battery Pack (sold with cordless product and/or as a replacement battery pack) is warranted to the original purchaser from an authorized MILWAUKEE distributor only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace a battery pack which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for the stated warranty period from date of purchase. Return of the battery pack to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. For the proper shipping procedure of battery packs, contact 1.800.SAWDUST (1.800.729.3878), or go to www.milwaukeetool.com. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

Battery Pack Cat. No.| Chemistry| Warranty Period (from date of purchase)
---|---|---
48-11-1812, 48-11-1813,

48-11-1828

(Serial number prefix “B41E” and later),

48-11-1840, 48-11-1850,

48-11-1850R, 48-11-1860,

48-11-1861, 48-11-1865,

48-11-1880, 48-11-1881,

48-11-1890, 48-11-2402,

48-11-2440, 48-11-2450,

48-11-2460,

48-11-2830

(Serial number prefix “C71”)

|

LITHIUM-ION

|

Three (3) Years

48-11-0490, 48-11-1815,

48-11-1820, 48-11-1835,

48-11-2001, 48-11-2330,

48-11-2401, 48-11-2420,

48-11-2425, 48-11-2430

| LITHIUM-ION| Two (2) Years
48-11-1828

(Serial number prefix “B41D” and earlier),

48-11-1830

(Serial number prefix “A95”),

48-11-2830

(Serial number prefix “A71”)

| LITHIUM-ION| Two (2) Years plus,

Three (3) Years Pro-Rata (prorated)*

48-11-0100, 48-11-1024,

48-11-1830

(Serial number prefix “E95”),

48-11-1970, 48-11-2230

| Nickel-Cadmium (Ni-Cd),

Nickel-Metal- Hydride (Ni-MH), LITHIUM-ION

|

One (1) Year

*The warranty period for MILWAUKEE M18™ 48-11-1828 (with the serial number prefix “B41D” and earlier), V18™ 48-11-1830 (with the serial number prefix “A95”), and V28™ 48-11-2830 (with the serial number prefix “A71”) is five (5) years / 2000 charges from the date of purchase, whichever first occurs. The first 1000 charges or 2 years of the warranty, whichever first occurs, are covered through free replacement of the defective battery. This means that for the earlier of the first 1000 charges or two (2) years from the date of purchase/first charge, a replacement battery will be provided to the customer for any defective battery free of charge. Thereafter, the remaining charges up to a total of 2000 or the remainder of the five (5) year period from the date of purchase, whichever first occurs, will be covered on a pro-rata basis. This means that every customer gets an additional 1000 charges or three (3) years of pro-rata warranty on the these battery packs, depending upon the amount of use. MILWAUKEE M18™ 48-11-1828 (with the serial number prefix “B41E” and later), V18™ 48-11-1830 (with the serial number prefix “E95”), and M28™ 48-11-2830 (with the serial number prefix “C71”) have different warranty periods, as listed. Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE battery pack. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON-SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800. SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE Battery Pack.

LIMITED WARRANTY USA & CANADA
This MILWAUKEE power tool is warranted to the original purchaser from an authorized MILWAUKEE distributor only to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair or replace any part on this power tool which, after examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of five (5) years after the date of purchase unless otherwise noted. Return of the power tool to a MILWAUKEE factory Service Center location or MILWAUKEE Authorized Service Station, freight prepaid and insured, is required. A copy of the proof of purchase should be included with the return product. This warranty does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
Normal Wear: Many power tools need periodic parts replacement and service to achieve best performance. This warranty does not cover repair when normal use has exhausted the life of a part including, but not limited to, carriage gears, chucks, brushes, cords, saw shoes, blade clamps, o-rings, seals, bumpers, driver blades, pistons, strikers, lifters, and bumper cover washers.
This warranty does not cover battery packs or all power tools. Refer to the separate and distinct warranties available for those products. The warranty period for the LED in the LED Work Light (49-24-0171) and the LED Upgrade Bulb (49-81-0090) is the lifetime of the product subject to the limitations above. If during normal use the LED or LED Upgrade Bulb fails, the part will be replaced free of charge. Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE power tool product. The manufacturing date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested. ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CON-SEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS WARRANTIES, WRITTEN OR ORAL. TO THE EXTENT PERMITTED BY LAW, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE; TO THE EXTENT SUCH DISCLAIMER IS NOT PERMITTED BY LAW, SUCH IMPLIED WAR-RANTIES ARE LIMITED TO THE DURATION OF THE APPLICABLE EXPRESS WARRANTY AS DESCRIBED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU, THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
This warranty applies to product sold in the U.S.A. and Canada only. Please consult the ‘Service Center Search’ in the Parts & Service section of MILWAUKEE’s website www.milwaukeetool.com or call 1.800. SAWDUST (1.800.729.3878) to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE power tool.