SOLDER CONNECTION HS4VS Disposable Heel Straps Instructions
- June 12, 2024
- SOLDER CONNECTION
Table of Contents
Email: [email protected] | Tel: +44(0)1291 624 400
Technical Bulletin
Issue 1 – 30/03/23
HS4VS Disposable Heel Straps
DESCRIPTION
Black and yellow disposable heel straps, ideal for visitors or short term use.
The conductive plastic wall dispenser is an ideal awareness for instructing
users of the importance of heel straps as well as storage.
Supplied in a pack of 100 with optional wall dispenser. Designed for plant
visitors and other temporary workers who enter static controlled floor. It is
made by anti-static non-woven fabrics and could provide the safe and effective
resistance. Depends on conductive yarn in the anti- static fabrics to create
and maintain electrical contact between ground and body and can reach the
efficiency of static dissipation.
FEATURES AND BENEFITS
- Easy to use and comfortable to wear.
- Application: Anywhere that is static
- controlled environment.
- Composition: 99% polyester + 1%
- conductive yarn.
- Supplied in a pack of 100.
- Made by anti-static fabrics.
CONSTRUCTION
- Align the pressure sensitive end of products with the front edge and centre of shoe heel.
- Peel the protective liner and mount the device. Press it firmly to the bottom of the heel.
- Wrap the contact ribbon of the heel grounder up the back shoe and lay it inside.
- Step into the shoe.
- Repeat steps one to four on the other shoe
STANDARD
ESD Overshoes complies with EN 61340-5-1 as standard.
The information contained herein is based on data considered accurate and is offered at no charge. No warranty is expressed or implied regarding the accuracy of this data. Liability is expressly disclaimed for any loss or injury arising out of the use of this information or the use of the materials designated.
solderconnect
www.solderconnection.com
The Solder Connection
Unit 5 Severn Link Distribution Centre • Chepstow • Monmouthshire • NP16 6UN