COMFAST CF-WR765AC Wireless Expander or Repeater Installation Guide

COMFAST CF-WR765AC Wireless Expander or Repeater

Product Information

The device is a repeater that amplifies the wifi signal. It has three indicator lights – power light, network light, and wifi light. The power light indicates if the device is turned on or off. The network light indicates if the network cable is connected or not. The wifi light indicates if the wifi signal is connected or not. If the wifi light is green, it indicates a strong wifi signal, and if it’s red, it indicates a weak wifi signal.

The device also has a WPS/reset button and a WAN/LAN port. The device complies with part 15 of the FCC rules and should be operated with a minimum distance of 20cm between the radiator and the user’s body.

Product Usage Instructions

1. Plug the device into a power outlet and turn on the power indicator.
2. If you want to connect the device to a network, connect the network cable to the WAN/LAN port.
3. If you want to connect the device to wifi, press the WPS/reset button and follow the instructions on your wifi device to establish a connection.
4. Check the wifi light to confirm if the wifi signal is strong (blue) or weak (red).
5. If the wifi signal is weak, try repositioning the device closer to your wifi source or consult a professional for help.

It’s important to note that any changes or modifications not approved by the party responsible for compliance may void the user’s authority to operate the equipment. If you experience any interference while operating the device, try reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, or consulting a professional for help.

Product Structure

Note: repeater working status, indicator light description

Simple Installation Steps

1. Plug in the power and turn on the power indicator

2. Wait about the 60s,connectWiFi “COMFAST.)00(_2G” or” COM FAST ..XXX…SG”

3. Click on the WiFi signal ‘COMFAST_XXX_2G’ or ‘COMFAST_XXX_SG’ The login interface will pop up, enter the password “ad min’ in the password box, and click ‘Set Password”
   Tip: When logging in for the first time, the login interface will pop up automatically. There are two cases when there is no login interface: First, the mobile phone itself does not support pop-up windows; Second, once set, once again enter the interface, you need to manually, Manual entry method: Open the mobile phone browser, enter “192.168.10.1” in the address bar.

4. After setting the password for the first time, it will automatically enter the relay scanning page. Set the trunk then choose the SSID of the relay, enter the upper routing password, and click Save to complete the relay, reconnectConnect to the wireless network to access the Internet, the wireless password is the superior routing password (the expanded signal will be in the superior and “-2G / 5G” suffix such as XXXX-2G / 5G after the WiFi name.

Warm tips:

• Combine wifi: Turn on this option, and it will automatically switch to a high-quality band for better performance.
• Sync your device: Turn on this option, the new WiFi will be the same as your original WiFi and there is no need to reconnect the extended WiFi anymore.

Operating mode

1. The software has four working modes, including relay mode, bridge mode, AP mode, and Routing mode (PPPoE dial-up, static IP, dynamic IP).
2. Bridge mode settings: Find and set in the advanced mode.
3. AP mode settings: Enter the software management page, and click on the AP mode, in order to facilitate the management, this IP address and default gateway entered here should be the IP segment of the superior router, and the IP address cannot be the same as the superior router’s IP conflicts. After setting, the device’s WAN port can access the external network through the setting IP address to access the management device.
4. Note: Access to external network in AP mode, other mobile devices access the AP’s wirelessly obtained IP addressThe network segment is allocated by the superior device.
5. According to the default setting, it is not necessary to set the device-specific intranet IP address; In this case, you must manually set the IP address of the local network card connected to the computer.
6. In AP mode, you can set a 2.4G / 5.8G wireless SSID name and password. After setting, set the prepared WAN port is connected to the external network; other mobile devices connect the SSID name of the device through wireless and enter Connect to the Internet with a password.

Routing mode settings:
Enter the software management page, only display the routing mode, and click Routing mode, which can select “PPPoE”, “Static IP”, or “Dynamic IP” Three ways to get online.

1. PPPoE dial-up mode: This mode requires the Internet account provided by the network service provider to be filled in the Number and password, below can set the 2.4G/5.8G wireless SSID name and the wireless password.
2. Static IP mode: This mode needs to fill in the IP address provided by the network service provider, Subnet mask, gateway, main DNS address, 2.4G / 5.8G wireless SSID can be set belowName, and the wireless password.
3. Dynamic IP mode: In this mode, the WAN port is assigned IP by the superior network device to access the Internet. The 2.4G/5.8G wireless SSID name can be set below.

FAQs

Q: What’s the role of the WiFi extender?
A: Boosts the range of your existing WiFi and creates a stronger signal in hard-to-reach areas. Please note that it can’t increase the wifi speed of your router, the speed of the extending wifi will be reduced.

Q: Where shall I place the WiFi extender?
A: We would suggest that after setting up successfully, please move this wifi extender halfway between your router and your weak signal area. The location that you choose must be within the range of your existing WiFi router network.

Q: How to reset the WiFi extender?
A: Press the WPS/Reset button of your extender for 10 seconds, and wait to restore factory settings, when the lamp will go out and then light up again, you can begin to set up it again.

Q: Why does WiFi keep disconnecting?
A: We recommend resetting the WiFi extender.

For more questions, please visit www.szcomfast.com official website.

Maintenance Regulations

Dear Valued Clients,
Thank you for purchasing CDMFRST products and services to protect your rights, please read the following maintenance regulations.

The following does not belong to free maintenance, our company can provide paid service, please note:

• Failure to require the installation manual, use, maintenance, and storage lead to product failure or damage;
• Beyond the limited warranty, the warranty period; Unauthorized alteration, tearing up the product bar code;
• Without authorization to change the settings file or inherent disassemble without authorization;
• Unexpected factors or human actions lead to product damage, such as improper input voltage, temperature, water mechanical damage, break, rust, or serious oxidation of the product, etc;
• Other non-product itself, design, technology.manufacturing, quality, and other quality problems caused by the failure damage.

Quick Installation Guide

Statement
Shenzhen Four Seas Global Link Network Technology CO., Ltd.Company all rights reserved.

Without ours official writ permission, no unit or individual shall be copied. reproduced. transcribed or translated in part or whole book. In any form or by any means (electronic, mechanical, printing, recording, or other possible means)or for the propagation of goods for any commercial, profitable purposes.

CDMFRST is the registered trademark of Shenzhen Four Seas Global Link Network Technology Co., Lld.Company. All other trademarks or registered trademarks mentioned in this document, are by respective owners.

Product specifications and information mentioned in this manual are for reference on subject to updates without notice. Unless there are other special agreements, this manual is used only as a user guide. All statements, information, etc. are not constitute any form of guarantee

• Manufacturer: Shenzhen Four Seas Global Link Network Technology Co., Lld.Company
• Address: Room 607-610, Block B Tao JINDI Electronic Business Incubation Base, Tenglong Road, Longhua District, Shenzhen, China.
• Hotline: 4009-001-766
• Website: en.comfast.com.cn.

FCC STATEMENT CAUTION

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Note:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator& your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>