Nedis WIFICDP20WT | WIFICDP20GY Rechargeable Video Doorbell User Manual

: June 5, 2024
: nedis

WIFICDP20WT | WIFICDP20GY Rechargeable Video Doorbell

WIFICDP20GY Rechargeable Video Doorbell

User Manual

Preface

Thank you for purchasing the Nedis WIFICDP20WT | WIFICDP20GY.

This document is the user manual and contains all the information for correct, efficient and safe use of the product.

Always store this information with the product for use in the future.

Product description

Intended use

The Nedis WIFICDP20XX is a Wi-Fi based Video Doorbell that streams recorded video and audio directly to your smartphone or tablet.

This product is intended for indoor and outdoor use.

Consult the local laws and regulations for security cameras before using and installing.

The product is not intended for professional use.

Any modification of the product may have consequences for safety, warranty and proper functioning.

Specifications

Product

|

Rechargeable Video Doorbell

---|---

Article number

|

WIFICDP20WT

|

WIFICDP20GY

Dimensions (l x w x h)

|

141 x 50 x 32 mm

Video resolution

|

1280 px – 720 px

|

1920 px – 1080 px

Video Compression

|

H.264

Viewing angle

|

100 °

|

180 °

Image sensor

|

1/4” CMOS sensor

|

1/2.7” CMOS sensor

Night vision range

|

5.0 m

Memory

|

MicroSD card: Up to 128 GB (not included)

IP rating

|

IP54 (splash proof)

Working temperature

|

-20 – 50 °C

Battery type

|

1 x 18650 (Li-ion)

|

2 x 18650 (Li-ion)

Battery capacity

|

2600 mAh

|

5200 mAh

Battery lifetime

|

Up to 2 months in standby or 200 recordings

|

Up to 4 months in standby or 400 recordings

Power input

|

5 VDC ; 2 A (Micro USB)

Standby power

|

2 mA

Wi-Fi frequency range

|

2412 – 2472 MHz

Wireless connections

|

Wi-Fi & 433 MHz

Max. radio transmit power

|

18 dBm

Compatible indoor chime

|

WIFICDPC10xx

Max. distance between doorbell and indoor chime

|

20 – 30 m

Infrared LEDs

|

6pcs Infrared LEDs with 5 meters visibility

PIR sensor

|

3 m

Main parts (image A)

Main parts A

1. Battery cover

2. Mounting holes

3. Mounting bracket

4. Hexagonal bolt

5. Micro USB port

6. Reset button

7. Charging indicator LED

8. Camera lens

9. Microphone

10. PIR sensor

11. Call button

12. Status indicator LED

13. Speaker

14. MicroSD card slot

15. Battery compartment

16. Micro USB cable

17. Batteries

Safety instructions

WARNING

Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
Only use the product as described in this document.
Disconnect the product from the power source and other equipment if problems occur.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not drop the product and avoid bumping.
In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
Do not use any cell or battery that is not designed for use with the product.
Do not dismantle, open or shred secondary cells or batteries.
Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
Seek medical advice immediately if a cell or a battery has been swallowed.
Do not short-circuit a cell or a battery.
Do not store cells or batteries haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by other metal objects.
Do not subject cells or batteries to mechanical shock.
Use only the cell or battery in the application for which it was intended.
Do not mix cells of different manufacture, capacity, size or type within a product.
Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
Battery usage by children should be supervised.
Observe the plus (+) and minus (–) marks on the cell, battery and equipment and ensure correct use.
Do not use any charger other than that specifically provided for use with the equipment.
Do not leave a battery on prolonged charge when not in use.
After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several times to obtain maximum performance.
Disconnect the power supply before making or breaking the connections to the battery.
During charging, the battery must be placed in a well-ventilated area.
Dispose of the cell or battery properly.
When possible, remove the battery from the product when not in use.
Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Consult the local laws and regulations for this product before installing and using.

Explanation of the symbols on the product or packaging

Icon

|

Description

---|---

|

Product in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions such as double insulation or reinforced insulation are provided, there being no provision for protective earthing or reliance upon installation conditions. NOTE A Class II products may be provided with means for maintaining the continuity of protective circuits, provided that such means are within the product and are insulated from accessible surfaces according to the requirements of Class II.

Installation

Check the contents of the package

Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.

Preparing the product

Unscrew the hexagonal bolt A- 4 from the bottom of the bracket
Unscrew the battery cover A- 1 to open the product.
Optional: insert a microSD card (not included) into the microSD card slot A- 14, to locally store recordings.
Insert the required batteries into the battery compartment A-15.

Note: Observe the plus (+) and minus (–) marks on the cell, battery and equipment and ensure correct use.

The status indicator LED A -12 blinks red to indicate the product is ready for installation.

If A -12 doesn’t blink blue, reset the product by holding the reset button A- 6 with a pin for 5 seconds.

Mounting the product

For stone walls:

Hold the mounting bracket A- 3 against the wall where you want to install the product.
Mark the holes in A- 3 on the wall with a pencil.
Remove A- 3 and drill the holes, using a drill with appropriate drill bit for the wall type.
Insert plugs into the holes.
Fasten A- 3 to the wall by driving four screws into the plugs.
Slide the product down onto A- 3.

For wooden walls:

Hold the mounting bracket A- 3 against the wall where you want to install the product.
Fasten A- 3 to the wall by driving four screws into the plugs.
Slide the product down onto A- 3.

Charging the product

Plug the micro USB cable A -16 into the micro USB port A- 5.
Plug the other end of A -16 into a USB adapter (not included).
Connect the USB power adapter to a power outlet.

The charging indicator LED A- 7 lights up red to indicate the product is charging

A7 turns green to indicate that the product is fully charged.

Installing the Nedis SmartLife app

Nedis SmartLife app

Download the Nedis Smartlife app for Android or iOS on your phone via Google Play or the Apple App Store.
Open the Nedis Smartlife app on your phone.
Create an account with your e-mail address and tap Continue. You will receive a verification code on your e-mail address.
Enter the received verification code.
Create a password and tap Done.
Tap Add Home to create a SmartLife Home.
Set your location, choose the rooms you want to connect with and tap Done.

Connecting the app

Tap + in the top right corner in the Nedis SmartLife app.
Select the product type you want to add from the list.
Confirm the status indicator LED A -12 is blinking.
Enter the Wi-Fi network data and tap Confirm.
Tap Continue and a QR-code will appear.
Hold your phone with a 15 – 20 cm distance in front of the camera. If the camera has detected the QR-code, you will hear a sound.
Tap to confirm you heard the sound.
Give the product a name and tap Done. A -12 turns blue. The product is now ready for use.

If Ae doesn’t blink blue, reset the product by holding the reset button A- 6 with a pin for 5 seconds.

Use

The start screen of the Nedis SmartLife app

After making a successful connection with the security camera, the Nedis SmartLife app displays an overview of the products that are connected.

Select the desired product in the overview.

The overview screen of the product (image B)

Here you can use the functions of the product and change the settings.

The interface consists of the following buttons:

overview screen of the product B

a. Back

b. The video mode.

c. Turn the sound on or off

d. Talk throught the speaker Ar

e. Take a screenshot

f. Cloud storage

g. Play motion detected videos

h. Settings

i. Wi-Fi signal

j. View full screen

k. Start a video recording

l. Alarm on/off

Making video recordings and screenshots

You can make video recordings and screenshots on your phone, by tapping Record and Screenshot .

Playing back motion detected videos

Motion detected videos are automatically saved on the microSD card, if inserted.

Tap Playback to open the stored videos.
Select the day of the recording.
Zoom and drag the timeline to select the recording.

Settings

Tap the settings key to open the settings screen.

Modify product name

|

Change the name of the security camera.

---|---

Share products

|

Share access to the product with others.

Product info

|

View information of the product.

Power manage

|

View the battery status and set the low battery signal.

Basic feature settings

|

Change the camera settings.

PIR switch

|

Adjust the sensitivity of the motion detection.

SD card settings

|

View the microSD card settings and set recording settings.

Feedback

|

Send product related feedback to Nedis.

Firmware info

|

View the version of the software.

Remove product

|

Remove the product from the Nedis SmartLife app.

Maintenance

Clean the product regularly with a soft, clean, dry cloth. Avoid abrasives that can damage the surface.
Do not use aggressive chemical cleaning agents such as ammonia, acid or acetone when cleaning the product.
Do not clean the inside of the product.

Warranty

Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.

This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.

Disclaimer

Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.

Disposal

|

This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.

---|---

Declaration of Conformity

We, Nedis B.V. declare as manufacturer that the product WIFICDP20WT | WIFICDP20GY from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via:

nedis.com/WIFICDP20WT#support

nedis.com/WIFICDP20GY#support

For additional information regarding the compliance, contact the customer service:

Web: www.nedis.com

E-mail: service@nedis.com

Phone: +31 (0)73-5991055 (during office hours)

Nedis B.V., de Tweeling 28

5215 MC ’s-Hertogenbosch, the Netherlands