BASS JAXX HP-0265 IM Wireless and Wired Kids Safe Headphone Instruction Manual
- June 5, 2024
- BASS JAXX
Table of Contents
BASS JAXX HP-0265 IM Wireless and Wired Kids Safe Headphone Instruction
Manual
Introduction
Congratulations, and thank you for choosing the BTGENERIC KID SAFE HP.
This manual will help you operate the BTGENERIC KID SAFE HP, but firstly you
should familiarize yourself with the Bluetooth functionality of your mobile
phone or other devices before using the BTGENERIC KID SAFE HP.
Safety Rules
Please follow the rules depicted in this manual closely to ensure your safety.
Before using this Bluetooth headphones, we would strongly encourage you to
read
through this user manual.
Be more wary of any edges, uneven surfaces, metal parts, accessories and its packaging so as to prevent any possible injury or damage.
Do not modify, repair or dismantle this Bluetooth headphones. Doing so may result in fires, electric shocks, complete breakdown of this Bluetooth headphones, etc. All are not covered under warranty.
Do not use an diluent or volatile liquid to clean the Bluetooth headphones.
Do not use the Bluetooth headphones in a hazardous location.
Packaging Contents
-
BT GENERIC KID SAFE HP
-
1 X 3.5mm Aux-in Cable
-
1 X Micro USB Cable
-
1 X Instruction Manual
Connection Diagram
How to use
General Function
Turn on & Enter the pairing mode| Press and hold the On / Off Button for 3
seconds. After turning on, the LED indicator flashes red/blue.
---|---
Pairing| Use a mobile phone with Bluetooth function or other Bluetooth devices
to perform necessary pairing action.
After pairing, the LED indicator slowly blinks with blue.
Turn off| Press and hold the On / Off Button for 4 seconds.
Charging| Plug the Micro USB to the Micro USB port. When charging, the LED
indicator turns red. After full charging, the LED indicator turns off.
Answering a Call| Press On / Off button to answer phone call, press On / Off
button again to end call Press and hold 2 seconds to reject call.
Double click to redial last call.
Play / Pause Music| Press Play / Pause button to play music and press it again
to pause music.
Wired Mode| Connect one end of the included 3.5mm Aux-in cable on your
headphone Aux-in port. Plug the other end of the 3.5mm Aux-in cable to your
audio device. The device will be power off once Aux-in cable is plug in.
Pairing to Mobile phone or other device
To use your Bluetooth headphones, you must first pair your headphones with a mobile phone or other Bluetooth device. Once your Bluetooth headphones is paired to a specific mobile phone, they will remain paired and automatically recognize each other whenever they are within range
Pairing to a phone and Entertainment:
-
Turn on your phone and ensure the Bluetooth function is activated.
-
Turn on the headphones, enter the pairing mode.
-
Search your Bluetooth devices on your phone by following the phone’s instructions. Refer to your phone’s user manual for more information.
-
After a few seconds the phone will list the “BT KID SAFE HP” as a discover device.
Select it and follow your phone’s instructions to select this pairing. -
Your phone will confirm the pairing, and then press Yes/OK.
Charging your headphones
For your safety, please always use an appropriate 5V input charger/Adapter to
charge the product. DO NOT USE Quick Charging USB Adapter to charge the
product, as it might damage the product.
Use the Micro USB cable accessory provided with this headphones. Connect the Micro USB plug to the Micro USB charging port on the headphones positioned at 1 in headphones diagram on. Connect the USB plug to a USB port on a computer or wall adapter to activate charging.
Make sure to keep the headphones charging for a minimum 2 hours before initial
use.
Warning:
- You must select a qualified charger froma regular manufacturer.
- You must charge the Bluetooth headphones if it has not been used for more than 6 months.
Product Specification
Driver Diameter: 40 mm
Impedance: 32 Ohms
Frequency Response: 20 Hz – 20 KHz
Sensitivity: < 85 dB
Power Supply: Li-ion Battery 3.7V 200 mAh
Playing Time: 2 – 3 Hours
Charging Time: 2 Hours
Bluetooth Range: 32.8 Feet
Micro USB Cable Included: 3.5mm Aux-in Cable Included
FAQ
-
. Why is there no power even when the headphones is turned on ?
Ans: Ensure the battery has been charged up to
2 hour for initial use. -
There is no sound when playback.
Ans: Check the connection between headphones with phone or computer, if the connection is not established, please connect again. Make sure the headphones is
paired and connected with your target phone or other master device.
FCC Statement
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- Changesormodifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for
a Class B digital device, pursuant toPart15 of theFCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment in to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Safety instructions for the lithium battery and charging the product
-
The input voltage to the product is 5V 1A.
-
In order to charge the product in safe manner and reliable conditions, please only adopt certified appropriate charger/ adapter for charging the product. DO NOT USE Quick Charging USB Adapter to charge the product, as it might damage the product.
-
Only charge the product at ambient temperatures between 10 deg °C/
50 deg °F
and 40 deg °C/104 deg °F. -
Do not heat above 70 deg °C/158 deg °F, e.g. Do not expose to sunlight or throw into fire.
-
Switch off the product after use.
-
Please note that we won’t take any responsibility for any wrong operation (e.g. Voltage higher than 5V) as this may result in severe injury or loss of property, and we cannot control the operating process during the time the user using this product.
-
In extreme cases, abuse or misuse of Lithium battery pack can lead to explosion, heat generation, fire development or smoke development.
FCC ID: 2ADM5-HP-0265
Keep all relevant information for future reference
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>