ZEBRONICS X10 Moving Monster Trolley DJ Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
ZEBRONICS X10 Moving Monster Trolley DJ Speaker
Thank you for purchasing Zebronics Speaker. Please read this user manual carefully before operation & save it for future reference.
Note:
- Avoid the use of this speaker at the high temperature and in high humid environments.
- Avoid self-dismantling of speaker. If you do so the warranty will be void.
Features
- Trolley DJ speaker
- Dual Wireless BTConnectivity
- Dual USB Connectivity
- Wireless BT/USB/mSD/FM/AUX/Mic Input x 2 Karaoke function
- 5 Band Equalizer
- DJ Mixer Control
- LED display
- LED lights with On/Off switch
- 25.4cm full range speaker
- Remote control
- Two Wireless mic
- Built-in rechargeable battery
Specification
- Output power (RMS) : 48W Driver size
- Full range : 25.4cm
- Tweeter: 2.54cm
- Impedance Full range : 40
- Tweeter : 40
- Frequency response : 90Hz-20kHz
- S/N Ratio: 60dB
- File format support: MP3, WMA, WAV Line input : 3.5mm
- Max. supported USB/mSD
- Memory size: 32GB
- FM frequency range: 87.5 MHz-108 MHz
- Charging time: 7 – 8 h
- Playback time: 8
- BT name: ZEB-MOVING MONSTERX10A/ZEB-MOVING
- BT version : 5.0
- Product dimension : 321 x 303 x 584 mm (Wx D x H)
- Net. weight : 6.9 kg
Package Contents
- DJ Speaker: : 1 U
- Remote: : 1 U
- Wireless MIC: : 2 U
- QR Code Guide Input cable: : 1 U
- Power adapter: : 1 U
Display Description:
- bt1: : First BT Mode
- bt2: Second BT Mode
- Pause: Song/Track is paused
- Line: The speaker is in AUX Mode
- U/TF : U/TF Card is being played in the First
Control Panel & Ports Description
- Previous Song/FM Channel Key for Mode 1, Press once to go to previous song/FM Channel in Mode 1
- Mode 1 change key Press once to switch between various connectivity options (BT, FM, AUX, USB & TF Card)
- Play/Pause Key for mode 1, Press Once to Play/Pause a song in Mode 1
- Mode 2 Change Key Press once to switch between various connectivity options in Mode 2 (BT & USB)
- Next mode2/FM Channel key for Mode 1, Press once to go to next song/FM Channel in Mode 1
- 6. LED lights Control key Press once to on-off the RGB Lights Press & hold to change 3 modes of light effects
- Previous Song Key for Mode 2 Press once to go to previous song in Mode 2
- Pre-loaded Sound 1
- Play/Pause for mode 2 Press Once to Play/Pause a song in Mode 2
- Pre-loaded Sound 2
- Next song Key in Mode 2 Press once to go to next song in Mode 2
- Pre-loaded Sound 3
- DJ MIXER Control Rotate anti-clockwise for Mode 1 Rotate clockwise for Mode 2
- Master Volume Control Rotate anti-clockwise for Volume -Rotate clockwise for Volume+
- 5 Band EQ Control
- FM Antenna
- Power switch
- AUXIN
- TF (SD) card slot
- Mode 1 USB
- Mode 2 USB
- Charging indicator
- DCIN
- Echo Volume
- Mic Volume
- MIC1 IN
- MIC2 IN
Remote Control
- Grey part to control ZEB-MOVING MONSTER X10A
- Orange part to control ZEB-MOVING MONSTER X10 B
Number 0-9: Press any key to choose the track
LIGHT: Press once for light on/off; Press and hold to change light modes;
EQ: Equalizer preset
Mode Change Key (BT, FM, AUX, USB
MODE2: Mode Change Key (BT & USB)
REPEAT: Repeat
MUTE: Previous track when USB/SD/BT
inputs: Next track when USB/SD/BT inputs
Ml: Play & Pause
General Instructions
BT connectivity
- Turn on the speaker.
- Make sure that the Mode 1 or Mode 2 is in BT Mode.
- In your mobile, search for BT Name
ZEB-MOVING MONSTER X10 A or ZEBMOVING
MONSTER X10 B for Mode 1 or
Mode 2 Respectively.
- Tap on the preferred BT to connect.
FM Connectivity:
- Switch the speaker to FM Mode by pressing the Mode 1 Key.
- Once the speaker is in FM Mode, Press & hold the Play/Pause key to auto scan the available FM Channels.
- Once the scanning is done, the speaker starts to playthe 1st saved FM Channel.
AUX Function:
- Switch the Speaker to AUX Mode by press the Mode 1 Key.
- When the speaker is in AUX Mode, Connect one end of the AUX Cable to the speaker & connects the other end to an Audio Source.
- The Songs played from the audio source can be heard through the speaker.
use Mode:
- Insert the USB to USB 1 or USB 2 of the speaker.
- The speaker will detect the USB automatically & the songs from the USB will be played.
Note: USB 1 & USB 2 is for Mode 1 & Mode 2 Respectively.
TF Card Mode:
- Insert the TF Card to the speaker
- The speaker will detect the TF Card automatically & the songs from the TF Card will be played.
Note: TF Card will work only for Mode 1.
Charging Instruction:
Connect the pre-included charger to the speaker & connect the other end to
230V power supply.
Charging Indication:
Red LED on the rear of the speaker glows.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Loading......