ZEBRONICS ZEB ACE Portable BT Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
Portable BT Speaker
User Manual
Thank you for purchasing ZEB-ACE Portable BT Speaker. Please read this user manual carefully before operating & save this user manual for future reference.
Features:
Wireless BT
Supports USB & mSD Card
Built-In FM Radio
AUX Input| Media /Volume Control
Wired Mic
Built-in Rechargeable Battery
RGB Lights
---|---
Specification:
Output power (RMS) : 8W
BTVersion :v5.0
Driver size : 10.2cm
Speaker impedance:4Ω
Frequency response : 200Hz-20kHz
S/N Ratio :≥80dB| Max. supported USB/mSD
memory size : 32GB
Supported Audio formats: MP3
Charging time :3h Playback time : 3h
Product dimension : 204 x 127 x 304 mm (Wx D x H)
Net. weight: 870g
at 50% Volume
---|---
Keys & Ports Description
- Mode Change Key, RGB On-Off Control Key (Long Press)
- Volume-/Previous track(in BT/USB/mSD Card Mode) or FM channel
- Play-Pause/FM Auto Scan Key
- Volume+/Next Track (in BT/USB/mSD Card Mode) or FM Channel
- USB Port
- TF/Micro SD card slot
- Micro USB Charging Port
- 3.5mm Mic input
- On-Off Switch
General Instructions:
BT Connectivity
Turn on the speaker & make sure that the speaker is in BT Mode. Search for
nearby BT devices on your mobile & tap on the BT name “ZEB-ACE” to connect.
FM Radio
Switch the speaker to FM mode. Press the Play-Pause key once to scan the
available FM channels. Once the scanning is done the speaker will start
playing the first saved FM channel.
USB/ Micro SD Card Mode
When the speaker is ON, insert the USB or Micro SD card into the speaker. It
will detect the USB or Micro SD card automatically & start playing the songs
from it.
AUX Mode
When the speaker is ON, connect the Micro USB end of the AUX cable to the
speaker & connect the other 3.5mm end to an audio source. Now the songs played
through the audio source can be heard through the speaker.
Charging Instruction
Connect the Micro USB cable to the product & connect the other end of the
cable to a 5V DC adapter.
LED Indications:
Charging indication: Red LED glows
Full charge indication: Red LED goes OFF
Mic Connectivity Instruction
Connect the included Mic to the 3.5mm Mic input of the speaker. Use the slide
switch on the Mic to On/Off the Mic.
Note: Connected Mic will work in all modes.
ISO 9001:2015 Certified Company
www.zebronics.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>