JBC CP-2QF 230V Micro Tweezers Soldering Station Instruction Manual

JBC CP-2QF 230V Micro Tweezers Soldering Station

This manual corresponds to the following references:

• CP-9QF (100V)
• CP-1QF (120V)
• CP-2QF (230V)

Packing List

The following items are included:

Features and Connections

Adjustable Stand
Adjust the tool stand to suit your work position.

Cable Collector (Ref. CC1001)
Place the cable on the collector so that the working area is free of cable.

Tip Cleaner

Select the option to suit your needs and improve the thermal transfer of the tip.

Removing the Splashguard

Changing Cartridges

Important
It is essential to insert the cartridges as far as the mark for a proper conection.

Compatible Cartridges

The CDP stations work with C120 cartridges and AM120 Ajustable Micro Tweezers. Find the model that best suits your soldering needs in www.jbctools.com

Operation

The JBC Exclusive Heating System
This revolutionary technology is able to recover tip temperature extremely quickly.
This allows the user to work at a lower temperature.
As a result, tip lite increases by S.

Through menu settings:

• Select temperature levels
• Fix one temperature

Control Process

Troubleshooting
Station troubleshooting availlable on the product page at www.jbctools.com

Parameters

Be careful when using these parameters as they may reduce the tip life if not used properly Please follow the recommended guidelines:

Station Settings

Tool Settings

USB Connector

Download the latest software from our website to update your soldering station.

JBC Updater
www.jbctools.com/software.html
Update the station software via USB connection:

JBC Web Manager
www.jbctools.com/manager.html
Manage and monitor as many stations as your PC can handle by using the JBC Web Manager. You can export data to another PC.

Maintenance

Before carrying out maintenance, always switch the device off and disconnect it from the mains. Allow the equipment to cool down.

• Clean the station screen with a glass cleaner or a damp cloth.
• Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts.
• Periodically check that the metal parts of the tool and stand are clean so that the station can detect the tool status.
• Maintain tip surface clean and tinned prior to storage in order to avoid tip oxidation. Rusty and dirty surfaces reduce heat transfer to the solder joint.
• Periodically check all cables and tubes.
• Replace any defective or damaged pieces. Only use original JBC spare parts.
• Replace a blown fuse as follows:
  1. Pull off the fuse holder and remove the fuse. If necessary use a tool to lever it off.
  2. Insert the new fuse into the fuse holder and return it to the station.
• When this warning appears on the main screen Earthing Fuse must be replaced
• -Repairs should only be performed by a JBC-authorized technical service.

Safety

It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion.

• Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire.
• Do not work on electrically live parts.
• The tool should be placed in the stand when not in use in order to activate the sleep mode. The soldering tip, the metal part of the tool and the stand may stil be hot even when the station is turned  off. Handle with care, including when adjusting the stand position.
• Do not leave the appliance unattended when it is on.
• Do not cover the ventilation grills. Heat can cause inflammable products to ignite.
•  Avoid flux coming into contact with skin or eyes to prevent irritation.
•  Be careful with the fumes produced when soldering.
•  Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves when working to avoid personal harm.
•  Utmost care must be taken with liquid tin waste which can cause burns.
•  The appliance can be used by children over the age of eight and also persons with reduced physical, sensory or mental capabilities or lack of experience provided that they have been given adequate
• Supervision or instruction concerning use of the appliance and understand the hazards involved. Children must not play with the appliance.
• Maintenance must not be carried out by children unless supervised.

Specifications

CP-9QF 100V 50/60Hz. Input fuse: T2A. Output: 23,5V.
CP-1QF 120V 50/60Hz. Input fuse: T2A. Output: 23,5V.
CP-2QF 230V 50/60Hz. Input fuse: T1A. Output: 23,5V.

• Output Peak Power CP-F: 80W
•  Temperature Range: 90 – 450 °C / 190 – 840 °F
•  Idle Temp. Stability (still air): ±1.5ºC / ±3ºF (Meets and exceed IPC J-STD-001)
• Temp. Accuracy: ±3% (Using reference cartridge)
• Temp. Adjustment: ±50ºC / ±90ºF (Through station menu setting)
• Tip to Ground Voltage/Resistance: Meets and exceed ANSI/ESD S20.20-2014 IPC J-STD-001F
• Earthing Fuse: F 1.25A
• Connections: USB connector station-P RJ12 connector
•  Ambient Operating Temp.: 10 – 50 ºC / 50 – 122 ºF
• Control Unit Dimensions / Weight: 170 x 176 x 145 mm / 2.8 kg (L x W x H) 6.7 x 6.9 x 5.7 in / 6.17 lb
• Total Net Weight: 3kg / 6.61 lb
•  Total Package Dimensions / Weight: 234 x 234 x 258 mm / 3.15 kg (L x W x H) 9.2 x 9.2 x 10.2 in / 6.94 lb
  Complies with CE standards ESD protected housing “skin effect”

Warranty

JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase.

DISPOSAL

This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility. www.jbctools.com 

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>