Linus X18A9705 high gloss bathroom vanity unit 60 x 56cm User Manual
- June 5, 2024
- Linus
Table of Contents
Model name: Linus
Number: X18 A9 705; X18 В5 705
Type: 705
Installation instructions
LKZ: XO105
**** | tighten | **** | press |
---|---|---|---|
**** | press in | **** | hammer in |
**** | measure | **** | Turn over – turn around |
X18A9705 high gloss bathroom vanity unit 60 x 56cm
SERVICE CARD
Our direct order service for fitting
If a fitting part is missing, you can e-mail this service card directly to
the address below. However, we can only send fitting parts in this way. If you
have any other cause for complaint concerning your item of furniture, please
contact your furniture store directly.
Nr.
| Maße mm| Colli|
Anzahl
---|---|---|---
1| 508| 322| 16| 1-1| 1
2| 508| 322| 16| 1-1| 1
3| 601| 322,5| 16| 1-1| 1
4| 601| 322,5| 16| 1-1| 1
5| 568| 292| 16| 1-1| 1
6| 538| 298| 16| 1-1| 1
7| 538| 298| 16| 1-1| 1
8| 578| 282| 2,5| 1-1| 1
B1| | | | 1-1| 1
Dear Customer,
As a furniture manufacturer, we would like to point out that an attachment is
only as good as the connection between the attachment material (dowel) and
masonry. In the case of suspension elements, you should check your masonry and
only use the appropriate dowels from a specialist store. Ultimately it is the
person carrying out the installation who is responsible for attachment to the
masonry.
The installation and laying of electrical lines and other items must only be
performed by authorized specialists. Please note the descriptions and weight
information in the installation instructions.
Please observe the stated maximum weights; in the case of mechanical overloads
caused by playing children, other individuals, materials, etc. we do not
accept any liability as the manufacturer of the furniture!
The furniture is only guaranteed to work perfectly if it is set up to be plumb
and horizontal. The doors have been pre-adjusted, but may need to be
realigned/readjusted in accordance with local conditions!
All electrical installations have been produced in accordance with the latest
norms and regulations, such as those of the VDE (Association of German
Electrical Engineers), CE, and MM. The power of the bulbs to be used is marked
on the respective light fitting. If the maximum number of watts stated on the
fitting is not complied with, there is a danger of fire from overheating.
Covering the lamps and bulbs is strictly prohibited due to the danger of fire!
All screws and load-bearing connecting parts should be tightened after 5 to 6
weeks in order to ensure long-term stability!
Do not use any abrasive cleaning materials!
If the operating or installation instructions are not complied with,
modifications are carried out to the products, parts are replaced or
consumable materials are used which do not correspond to the original parts,
all warranty or liability claims shall become null and void.
Care instructions for high-gloss surfaces of furniture.
Attention! Notice!
Our high gloss surfaces have a protective foil when delivered.
Please leave this foil on the furniture until it is completely assembled and
all dust has been removed.
To maintain the valuable high gloss appearance, you should expose the high
gloss foil to the room air for an hour to allow it to harden after removing
the protective foil.
- Only use a damp cotton cloth and a small amount of glass cleaner to clean the surfaces.
- Do not use any aggressive cleaners with additives.
- Rub off the surfaces with a wet rag.
- Do not use a steam cleaner.
- Do not damage the surface with sharp objects.
- Do not in any case expose the surfaces to intense sunlight
We wish you plenty of enjoyment with your new furniture.
Your product development team
|
---|---
|
Model name: Linus
Number: X18 A9 725; X18 В5 725
Type: 725
Installation instructions
LKZ: XO105
**** | tighten | **** | press |
---|---|---|---|
**** | press in | **** | hammer in |
**** | measure | **** | Turn over – turn around |
SERVICE CARD
Our direct order service for fitting If a fitting part is missing, you can
e-mail this service card directly to the address below. However, we can only
send fitting parts in this way. If you have any other cause for complaint
concerning your item of furniture, please contact your furniture store
directly.
Nr. | Maße mm | Colli | Anzahl |
---|---|---|---|
1 | 702 | 160 | 16 |
2 | 702 | 160 | 16 |
3 | 568 | 140 | 16 |
4 | 568 | 140 | 16 |
5 | 660 | 140 | 16 |
6 | 660 | 140 | 16 |
7 | 118 | 130 | 16 |
8 | 300 | 130 | 16 |
9 | 700 | 140 | 20 |
10 | 700 | 314 | 20 |
11 | 690 | 130 | 3 |
12 | 690 | 130 | 3 |
13 | 690 | 314 | 3 |
B1 |
Dear Customer,
As a furniture manufacturer, we would like to point out that an attachment is
only as good as the connection between the attachment material (dowel) and
masonry. In the case of suspension elements, you should check your masonry and
only use the appropriate dowels from a specialist store. Ultimately it is the
person carrying out the installation who is responsible for attachment to the
masonry.
The installation and laying of electrical lines and other items must only be
performed by authorized specialists. Please note the descriptions and weight
information in the installation instructions.
Please observe the stated maximum weights; in the case of mechanical overloads
caused by playing children, other individuals, materials, etc. we do not
accept any liability as the manufacturer of the furniture!
The furniture is only guaranteed to work perfectly if it is set up to be plumb
and horizontal. The doors have been pre-adjusted, but may need to be
realigned/readjusted in accordance with local conditions!
All electrical installations have been produced in accordance with the latest
norms and regulations, such as those of the VDE (Association of German
Electrical Engineers), CE, and MM. The power of the bulbs to be used is marked
on the respective light fitting. If the maximum number of watts stated on the
fitting is not complied with, there is a danger of fire from overheating.
Covering the lamps and bulbs is strictly prohibited due to the danger of fire!
All screws and load-bearing connecting parts should be tightened after 5 to 6
weeks in order to ensure long-term stability!
Do not use any abrasive cleaning materials!
If the operating or installation instructions are not complied with,
modifications are carried out to the products, parts are replaced or
consumable materials are used which do not correspond to the original parts,
all warranty or liability claims shall become null and void.
|
---|---
|
|
Model name: Linus
Number: X18 A9 701; X18 В5 701
Type: 701
Installation instructions
LKZ: XO105
**** | tighten | **** | press |
---|---|---|---|
**** | press in | **** | hammer in |
**** | measure | **** | Turn over – turn around |
Our direct order service for fitting
If a fitting part is missing, you can e-mail this service card directly to the address below. However, we can only send fitting parts in this way. If you have any other cause for complaint concerning your item of furniture, please contact your furniture store directly.
Nr. | Maße mm | Colli | Anzahl |
---|---|---|---|
1 | 738 | 290 | 16 |
2 | 738 | 290 | 16 |
3 | 301 | 290,5 | 16 |
4 | 301 | 290,5 | 16 |
5 | 268 | 260 | 16 |
6 | 576 | 298 | 16 |
7 | 190 | 298 | 16 |
8 | 250 | 120 | 16 |
9 | 250 | 120 | 16 |
10 | 210 | 116 | 16 |
11 | 220 | 244 | 2,5 |
12 | 748 | 278 | 2,5 |
B1 |
Dear Customer,
As a furniture manufacturer, we would like to point out that an attachment is
only as good as the connection between the attachment material (dowel) and
masonry. In the case of suspension elements, you should check your masonry and
only use the appropriate dowels from a specialist store. Ultimately it is the
person carrying out the installation who is responsible for attachment to the
masonry.
The installation and laying of electrical lines and other items must only be
performed by authorized specialists. Please note the descriptions and weight
information in the installation instructions.
Please observe the stated maximum weights; in the case of mechanical overloads
caused by playing children, other individuals, materials, etc. we do not
accept any liability as the manufacturer of the furniture!
The furniture is only guaranteed to work perfectly if it is set up to be plumb
and horizontal. The doors have been pre-adjusted, but may need to be
realigned/readjusted in accordance with local conditions!
All electrical installations have been produced in accordance with the latest
norms and regulations, such as those of the VDE (Association of German
Electrical Engineers), CE, and MM. The power of the bulbs to be used is marked
on the respective light fitting. If the maximum number of watts stated on the
fitting is not complied with, there is a danger of fire from overheating.
Covering the lamps and bulbs is strictly prohibited due to the danger of fire!
All screws and load-bearing connecting parts should be tightened after 5 to 6
weeks in order to ensure long-term stability!
Do not use any abrasive cleaning materials!
If the operating or installation instructions are not complied with,
modifications are carried out to the products, parts are replaced or
consumable materials are used which do not correspond to the original pads,
all warranty or liability claims shall become null and void.
Care instructions for high-gloss surfaces of furniture
Attention! Notice!
Our high gloss surfaces have a protective foil when delivered. Please leave
this foil on the furniture until it is completely assembled and all dust has
been removed.
To maintain the valuable high gloss appearance, you should expose the high
gloss foil to the room air for an hour to allow it to harden after removing
the protective foil
- Only use a damp cotton cloth and a small amount of glass cleaner to clean the surfaces.
- Do not use any aggressive cleaners with additives.
- Rub off the surfaces with a wet rag.
- Do not use a steam cleaner.
- Do not damage the surface with sharp objects.
- Do not in any case expose the surfaces to intense sunlight
We wish you plenty of enjoyment with your new furniture.
Your product development team
|
---|---
|
|
Model name: Linus
Number: X18 A9 721; X18 В5 721
Type: 721
Installation instructions
LKZ: XO105
**** | tighten | **** | press |
---|---|---|---|
**** | press in | **** | hammer in |
**** | measure | **** | Turn over – turn around |
Our direct order service for fitting
If a fitting part is missing, you can e-mail this service card directly to the
address below. However, we can only send fitting parts in this way. If you
have any other cause for complaint concerning your item of furniture, please
contact your furniture store directly.
Nr.
| Maße mm| Colli|
Anzahl
---|---|---|---
1| 738| 215| 16| 1-1| 1
2| 738| 215| 16| 1-1| 1
3| 301| 215,5| 16| 1-1| 2
4| 268| 185| 16| 1-1| 2
5| 768| 298| 16| 1-1| 1
6| 748| 278| 2,5| 1-1| 1
B1| | | | 1-1| 1
Dear Customer,
As a furniture manufacturer, we would like to point out that an attachment is
only as good as the connection between the attachment material (dowel) and
masonry. In the case of suspension elements, you should check your masonry and
only use the appropriate dowels from a specialist store. Ultimately it is the
person carrying out the installation who is responsible for attachment to the
masonry.
The installation and laying of electrical lines and other items must only be
performed by authorized specialists. Please note the descriptions and weight
information in the installation instructions. Please observe the stated
maximum weights; in the case of mechanical overloads caused by playing
children, other individuals, materials, etc. we do not accept any liability as
the manufacturer of the furniture!
The furniture is only guaranteed to work perfectly if it is set up to be plumb
and horizontal. The doors have been pre-adjusted, but may need to be
realigned/readjusted in accordance with local conditions!
All electrical installations have been produced in accordance with the latest
norms and regulations, such as those of the VDE (Association of German
Electrical Engineers), CE, and MM. The power of the bulbs to be used is marked
on the respective light fitting. If the maximum number of watts stated on the
fitting is not complied with, there is a danger of fire from overheating.
Covering the lamps and bulbs is strictly prohibited due to the danger of fire!
All screws and load-bearing connecting parts should be tightened after 5 to 6
weeks in order to ensure long-term stability!
Do not use any abrasive cleaning materials!
If the operating or installation instructions are not complied with,
modifications are carried out to the products, parts are replaced or
consumable materials are used which do not correspond to the original parts,
all warranty or liability claims shall become null and void.
Care instructions for high-gloss surfaces of furniture
Attention! Notice!
Our high gloss surfaces have a protective foil when delivered. Please leave
this foil on the furniture until it is completely assembled and all dust has
been removed. To maintain the valuable high gloss appearance, you should
expose the high gloss foil to the room air for an hour to allow it to harden
after removing the protective foil.
- Only use a damp cotton cloth and a small amount of glass cleaner to clean the surfaces.
- Do not use any aggressive cleaners with additives.
- Rub off the surfaces with a wet rag.
- Do not use a steam cleaner.
- Do not damage the surface with sharp objects.
- Do not in any case expose the surfaces to intense sunlight
We wish you plenty of enjoyment with your new furniture.
Your product development team.
|
---|---
|
Reason for the objection: …………..
Furniture store: ………………………….
Name: …………. Telephone: …………
postal code: ………. City: ……………..
Street: …………………………………………
House No.: ……… @E-Mail: ……….
Customer service e-mail:
service@xonox-home.com
Hotline: xonox.home GmBH
0049-(0)5261-92020800
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>