Nedis WCPD65W105BK | WCPD65W105WT USB-C Wall Charger User Manual
- June 5, 2024
- nedis
Table of Contents
WCPD65W105BK | WCPD65W105WT USB-C Wall Charger
User Manual
Preface
Thank you for purchasing the Nedis WCPD65W105BK / WCPD65W105WT.
This document is the user manual and contains all the information for correct, efficient and safe use of the product.
This user manual is addressed to the end user. Read this information carefully before installing or using the product.
Always store this information with the product for use in the future.
Product description
Intended use
The USB wall charger is intended to charge tablets, smartphones and many other USB devices, without requiring a PC or notebook. The USB charger converts voltages from 100 to 240 VAC into 5.0 VDC – 20.0 VDC and is very convenient at offices, at home or during travels.
The product is intended for indoor use only.
The product is not intended for professional use.
Only use the provided USB cable.
Any modification of the product may have consequences for safety, warranty and proper functioning.
Specifications
Product
|
USB-C Wall Charger
---|---
Article number
|
WCPD65W105BK / WCPD65W105WT
Input voltage
|
100 – 240 VAC
Input AC frequency
|
50/60 Hz / 1.5 A
Output voltage
|
5.0 VDC / 9.0 VDC / 12.0 VDC / 15.0 VDC / 20.0 VDC
Output current
|
3.0 A / 3.0 A / 3.0 A / 4.0 A / 3.25 A
Output power
|
15.0 W / 27.0 W / 36.0 W / 60.0 W / 65.0 W
Average active efficiency
|
81.44 %
Efficiency at low load (10 %)
|
72.55 %
No-load power consumption
|
0.10 W
Main parts (image A)
A
1. Charger
2. Interchangeable plug
3. USB-C – USB-C cable
Safety instructions
WARNING
- Ensure you have fully read and understood the instructions in this document before you install or use the product. Keep the packaging and this document for future reference.
- Only use the product as described in this document.
- Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
- Do not drop the product and avoid bumping.
- This product may only be serviced by a qualified technician for maintenance to reduce the risk of electric shock.
- Do not expose the product to water or moisture.
- Disconnect the product from the power source and other equipment if problems occur.
- Always check that the voltage of the product corresponds to the mains voltage.
- Do not unplug the product by pulling on the cable. Always grasp the plug and pull.
- Unplug the product when your device is charged or if you do not plan on using the product for an extended period of time.
- The power outlet shall be located near the product and shall be easily accessible.
- Never use a damaged or faulty USB cable for charging. This this can damage the product and harm your device.
- Stop the charging process if the product gets too warm.
Explanation of the symbols on the product or packaging
Icon
|
Description
---|---
|
Electronic equipment needs to bear the CE mark in order to be marketed in the EU. CE marking shows that a product is assessed before being placed on the market and that it meets EU safety, health and environmental protection requirements. CE marking is also sometimes accepted as a means of compliance with type-approval requirements; for example, electronic components that require type-approval and also CE marking for electromagnetic compatibility (EMC) or low-voltage equipment.
|
Product in which protection against electric shock does not rely on basic insulation only, but in which additional safety precautions such as double insulation or reinforced insulation are provided, there being no provision for protective earthing or reliance upon installation conditions. NOTE A Class II products may be provided with means for maintaining the continuity of protective circuits, provided that such means are within the product and are insulated from accessible surfaces according to the requirements of Class II.
|
Indication to explain that the product needs to be collected separately when disposed. Do not throw in the trash bin.
|
Indication to explain the product is suitable for indoor use only.
Use
Check the contents of the package
Check that all parts are present and that no damage is visible on the parts. If parts are missing or damaged, contact the Nedis B.V. service desk via the website: www.nedis.com.
Using the product
1. Connect the charger into the power outlet.
2. Insert a USB cable into the USB charging port and the other end to the device you want to charge.
3. Unplug the charger when it is not in use.
Warranty
Any changes and/or modifications to the product will void the warranty. We accept no liability for damage caused by improper use of the product.
This product is designed for private use (normal domestic use) only. Nedis is not responsible for wear, defect and/or damages caused by commercial use of the product.
Disclaimer
Designs and specifications are subject to change without notice. All logos, brands and product names are trademarks or registered trademarks of their respective owners and are hereby recognized as such.
Disposal
|
This symbol indicates that this product should not be thrown away with other household waste throughout the EU. To prevent possible harm to the environment or human health by uncontrolled waste disposal, you are responsible for recycling it so that it can promote the sustainable reuse of raw materials. To return your used product, you can use the regular return and collection systems or contact the store where the product was purchased. They can recycle this product for the environment.
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>