ZEBRONICS ZEB 500 THUMP Portable Trolley Speaker User Manual
- June 5, 2024
- ZEBRONICS
Table of Contents
zebronics ZEB 500 THUMP Portable Trolley Speaker
Dear Customer, Thank you for purchasing ZEB-THUMP 500 Portable BT
Speaker. Please read the user manual carefully before usage & save it for
future reference.
Note:
- Avoid the usage of this product in high temperature and high humidity environments.
- Avoid the self-disassembly of the product as it results in the failure of the Warranty.
- Turn off the speaker if the speaker is not being used for a long period of time.
- Please charge the product with power adapter output rated voltage DC SV.
Features
- Wireless BT
- Supports USB & mSD
- AUX
- Built-in FM Radio
- LED Display
- TWS Function
- 6.3mm Microphone Input MediaNolume Control Volume, Bass & Treble Control Built-in Rechargeable Battery Wireless MIC
- RGB Lights with Control Switch
Specifications
- Output Power(RMS): 45W
- BT Version: V5.0
- Driver Size: 30.48 cm+ (6.2x 7) cmm
- Speaker Impedance: 30+10Q
- Frequency Response: 100 Hz-20kHz
- S/N Ratio: 80dB
- Max Supported USB/mSD memory size: 32GB
- FM Frequency range Supported: 87.5 MHz -108 MHz
- Audio formats: Mp3
- Charging time: 6H
- Playback time: 3H*
- Product Dimension (Wx Dx H): 360x320x530 mm
- Net. Weight: 5.4kg
Buttons Description
- DC SV
- Master Volume I Power ON/OFF
- mUSB DC SV
- Bass Control
- AUX
- Mode Button
- USB port
- Prev. / Vol –
- mSD Port
- Play/Pause & RGB
- Next/ Vol +
- Treble Control
- Mic. Port
- Echo control
- Mic. Volume Control
Instruction for Use
Button Function:
- Turn the speaker ON/OFF using the power switch.
- Press the mode button to change it to BT mode.
- Use the Master volume control knob to increase/ decrease the volume.
- Use MIC volume control knob to increase/decrease the MIC volume.
- Press Prev/Next button to control the media.
- Press the Play-Pause button to play song or pause song being played.
- Press & Hold the Play/Pause to change the RGB Light.
Pairing with the Bluetooth speaker
- Power ON the Speaker and you will hear the indication tone for the BT mode.
- Turn ON BT on your phone or tablet and search for nearby BT-compatible devices.
- Search for the BT name “ZEB-THUMP 500” and tap to connect it.
Micro so I use Mode
Once the speaker is ON, insert the micro SD card I USB drive to the respective ports of the “ZEB-THUMP 500” and the speaker will automatically detect the songs from the USB drive/Micro SD card and play. Press Prev/Next button to control the media. Use the Master volume knob to control the volume of the speaker.
FM Radio
Once the speaker is turned ON, please switch the speaker to FM mode using the
Mode button, Press the Play-Pause button to auto scan the available FM
channels. Use Prev/Next button to change the FM channels.
Note: For better FM reception, Please use the provided AUX Cable.
TWS Function
- Switch ON two “ZEB-THUMP 500” speakers you want to pair.
- Press & hold the Mode button for 5-10 seconds in any one speaker to activate TWS mode.
- After few seconds, both the speakers will be connected successfully.
- Now, search for nearby BT device in your mobile and Tap on the BT name “ZEB-THUMP S00″to connect.
- To exitTWS mode, Press & hold mode button for 5-10 seconds in any one speaker to exit from TWS mode.
Charging the Speaker
- Connect the charging cable to DC SV port of the speaker and insert the other end into a DC SV charging power source/adapter.
- Red LED glows indicating that the battery is being charged.
- Red LED goes OFF after the speaker gets fully charged.