Canon LBP236dw Compact Monochrome Laser Printer User Guide

Compact Monochrome Laser Printer
User Guide
LBP236dw
LBP233dw

Important Safety Instructions

Be sure to read these instructions before using the machine
Setup Guide (this document)
User’s Guide / FAQ

https://oip.manual.canon/

• After you finish reading this guide, store it in a safe place for future reference.
• The information in this guide is subject to change without notice

Unless otherwise stated, illustrations used in this document are for the LBP236dw.

C **hecking the Items Included

** Removing the Packing Material

1. Install the machine in the location where it will be used
2. Remove all packing material.
   Remove all of the tape.
   Do not remove the sticker that covers the USB port until you actually use the USB port

Loading Paper

Installing the Optional Part

** If you are not using optional part, proceed to step
Before Installing the Optional Part**
When installing the optional part after the machine has been installed, perform the following before starting work:

1. Shut down the machine and your computer.
2. Unplug the machine from the mains power outlet.
3. Disconnect all cords and cables from the machine.

Cassette feeding module

1. Install the cassette feeding module in the location where it will be used.
2. 3. 
3. 5. 

Connecting the Power Cord

Specifying the Basic Settings

When you turn on the machine for the first time, the Setup Guide appears on the operation panel. Perform the initial machine setup by following the on- screen instructions.

1. Select the language, then the country/region and finally the time zone.
2. Set the current date/time.

Specifying the Security Settings

Specify the basic security settings to prevent unauthorized access to the machine.

1. To use the Remote UI, select .
   To continue without using the Remote UI, select and proceed to step 8 .

2. Check the explanation for using General User mode and press OK.

3. To use General User mode, select .
   • Set the PIN to be used by general users to access the Remote UI.
   • To continue without using General User mode, select and proceed to step 8 .

4. Set the Remote UI Access PIN.
   • Enter any number and then select .
   • Re-enter the same PIN on the next screen as confirmation and select .

Specifying the Network Settings

Specify the settings for connecting the machine to a network. Before proceeding, check that the computer and router are correctly connected to the network.

Wireless LAN

1. Check the router’s “SSID” and “Network key.”
2. To configure the settings, select on the operation panel.
3. Select the network with a matching SSID.
4. Enter the password (network key) and select .
5. Select to connect using the selected settings.
   Select to return to the previous screen

Wired LAN
Connect the router to the machine with a LAN cable and then select in the screen for choosing how to connect to the network.

Installing the Software/Drivers

Install the software and drivers from the CD/DVD-ROM included, or visit the URL below and download them from the Canon website for your country/region. https://global.canon/en/support/
XXXXXXX download
Example: LBP236dw download

CANON U.S.A., INC.
One Canon Park, Melville, NY 11747, U.S.A.

CANON AUSTRALIA PTY LTD
Building A, The Park Estate, 5 Talavera Road, Macquarie Park, NSW 2113, Australia
CANON GLOBAL WORLDWIDE SITES
https://global.canon/             FT6-2805 (000) XXXXXXXXXX Copyright CANON INC.
2021 PRINTED IN XXXXX

References

• Canon Global
• For Product and Support Information | Canon Global
• Canon - User Manuals

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>