Victrola Wooden Desktop FM Radio with Bluetooth, Farmhouse-Complete Features/Instruction Guide

Victrola Wooden Desktop FM Radio with Bluetooth, Farmhouse

Specifications

• POWER REQUIREMENTS: AC 120 V – 60 Hz
• POWER CONSUMPTION: 15W
• DIMENSIONS (L X H X D): 227mm (9″) x 135mm (5″) x 161mm (6”) (approx.)
• WEIGHT: 1. 3 kg. (2.9 lbs.) (approx.)
• TYPE: 1 Way
• IMPEDANCE: 8 ohms
• OUTPUT POWER: 10W
• FM RADIO RANGE: 88 to 108 MHz
• BLUETOOTH VERSION: Bluetooth V2.1+EDR
• BLUETOOTH PROFILES: A2DP, AVRCP
• BLUETOOTH FREQUENCY RANGE: 2.402GHz-2.480GHz
• OPERATING DISTANCE: 10 meters (33 ft.)

Introduction

Victrola is ideal for use in the kitchen, workplace, or desk, it has an attractive brushed metal faceplate, an aluminum speaker grill, and control knobs, the Victrola Houston Desktop Radio is tastefully made from a hardwood finish. You can even connect to Bluetooth from 33ft away. Bluetooth built-in allows you to wirelessly play music from a Bluetooth-enabled device. It is a FM radio with an analogue tuning mechanism. It is featured for usage with non- Bluetooth devices, there is a 3.5mm Aux-In connection. MP3 devices, cellphones, tablets, and PCs are all compatible.

CAUTION
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

WARNING
To prevent electric shock, do not use this (polarized) plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure

1. Read these instructions – All the safety and operating instructions should be read before this product is

2. Keep these instructions- The safety and operating instructions should be retained for future reference.

3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.

4. Follow all instructions – All operating and use instructions should be followed.

5. Do not use this apparatus near water – The appliance should not be used near water or moisture – for example, in a wet basement or near a swimming pool, and the like.

6. Clean only with dry

7. Do not block any ventilation Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiations, heat registers, stoves, or other apparatus (including amplifiers) that produce

9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete

10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug the apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus have been exposed to rain or moisture, do not operate normally, or has been

15. This lightning flash with an arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

16. Warning: To reduce the risk of electric shock, do not remove the cover (or back) as there are no user-serviceable parts inside. Refer servicing to qualified

17. The exclamation points within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the literature accompanying the appliance.

18. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.

19. WARNING

20. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus.

21. The use of the equipment in moderate

22. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, table-cloths, curtains, etc.

23. No naked flame sources, such as lighted candles, should be placed on the apparatus.

24. CAUTION, these servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.

Product Overview

1. SPEAKER

2. FM SCALE

3. RADIO TUNER KNOB In FM mode, turn to tune into a

4. FUNCTION ROTARY SELECTOR (POWER/ FM/ BLUETOOTH / AUX)

   • Turn to select Function mode.
   • Turn to POWER mode to turn the unit off. Turn to FM mode to listen to the FM radio.
   • Turn to BLUETOOTH mode to listen to Bluetooth.
   • Turn to AUX mode to listen to an external device connected to the AUX-IN jack

5. “VOLUME” KNOB Turn to adjust Rear View

6. AUX-IN Jack
   When connecting a device that has a headphone jack, use a 3.5mm cable to connect to the AUX-IN jack.

7. Headphones Jack
   To listen to the unit using headphones, insert headphones into the Headphone jack.

8. FM Telescopic Antenna
   While tuned to a station in FM mode, extend the Telescopic Antenna and reposition to adjust for best reception.

9. AC Power Cord
   Plugs into a wall outlet.

Basic Operation

1. Power on
   Connect the power plug into the wall outlet.

2. Rotate the Function Rotary selector to select a source.

3. Rotate the VOLUME knob to adjust to desired sound

4. Poweroff
   Rotate the Function Rotary selector on POWER position

5. Standby mode
   The main unit will turn off when the speaker is idle for approximately 15 minutes (not while in Radio Mode). Once the unit turns off, rotate the Function Rotary selector to turn the unit on again.

6. Listening through Headphones (not included)
   For private listening, first reduce the volume level to the minimum. Insert your headphones ‘ plug into the HEADPHONES Jack, then adjust the volume up by turning the VOLUME knob.

Note: The speakers will automatically be deactivated while headphones are plugged in. When you switch to a different mode, make sure to unplug your Headphones.

__ CONDENSATION WARNING

When the unit is moved from a cold or warm place, or is used following a sudden temperature change, there is the danger that water vapor in the air may condense on the unit, preventing proper operation. In such cases, leave the unit for 1-2 hours after plugging it into an AC outlet to allow it to stabilize at the temperature of its surroundings.

Listening to FM Radio

Turn the unit on.

1. Rotate the Function Rotary Selector to FM position and the dial scale will light up orange.
2. Rotate the VOLUME knob to adjust the volume level you
3. Rotate the TUNING knob to select your desired station.
4. Pull out the Telescopic Antenna and adjust its length and angle for optimum reception.

Listening to an external audio device AUX Mode.

In AUX (auxiliary) mode, this unit can play audio from an external audio device (iPod, MP3 Player, Portable CD Player, etc.) When connecting a device that has a headphone jack, use a 3.5mm AUX cable and connect to the AUX-IN jack located on the back of the unit.

1. Plug one end of the AUX-IN cable (not included) into the AUX-IN (on the back of the unit).
2. Plug the other end of the cable into the headphone jack of the external audio
3. Rotate the Function Rotary Selector to AUX position and the dial scale will light up Green.
4. Turn your external device on to start
5. Rotate the VOLUME knob to adjust the sound
6. Adjust the volume level on your device if necessary.
7. You can control playback through your external

NOTE: All playback operations are only accessible on your external device.

Listening to an external audio device (Bluetooth Mode)

In Bluetooth mode, this unit can play music from external devices that are Bluetooth compatible.

GETTING CONNECTED USING BLUETOOTH

1. Rotate the Function Rotary Selector to Bluetooth position and the dial scale will flash blue.

2. Set the Bluetooth function of your external device when the apparatus is on.

3. Open Bluetooth Settings on your external
   NOTE: The effective distance between your external device and this apparatus is 10 meters (33ft).

4. Wait a few seconds for “VRS-2400 ” to appear on the device list of your external device’s Bluetooth settings and select “ VRS-2400 “ . If your device asks for a password enter “0000” then press “OK”.

5. When the Bluetooth connection has been established successfully you will hear an audible beeping and the dial scale will stop flashing.

6. Start playback through your external

Specifications

GENERAL
Power Requirements AC 120 V- 60 Hz
Power Consumption __ 15W
Dimensions (L x H x D) __ 227mm (9″) x 135mm (5″) x 161mm (6″) (approx.) Weight ____ 1.3 kg. (2.9 lbs.) (approx.)

SPEAKER SYSTEM
Type ___ 1-way
lmpedance ____ B ohms
Output Power _ 10W

FM Radio
Range _____ 88 to 108 MHz

BLUETOOTH
Bluetooth Version ____ Bluetooth V2.1+EDR
Bluetooth Profiles ____ A2DP, AVRCP
Bluetooth Frequency range __ 2.402GHz-2.480GHz
Operating Distance ___ 10 meters (33 ft.)

Troubleshooting Guide

FCC Statement

**** This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving
• Increase the separation between the equipment and
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for

WARNING: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
The device must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

California PROP 65 Warning
WARNING” This product contains chemicals known to the State of California to cause birth defects or other reproductive harm.

Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC. Limited Warranty: 90 Days Labor, One Year Parts ****

Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in materials under normal use for a period of “One Year” from the date of the original purchase. The

Warranty is “Not” transferable. IT agrees, within the initial “90 Day” period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cost to repair or replace damaged “Parts” only for a total period of “One Year” from the date of the original purchase. The warranty does not cover cosmetic damage, antennas, AC cords, cabinets, headbands, ear-pads, or damage due to line power surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To obtain service, the purchaser MUST present an original sales receipt/ proof of purchase. Please contact us at www.ithomeproducts.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection (IT) may issue a replacement to customer for the same item or of one that has equivalent value and features. To return an item, supply full name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number.

All returns must be in the original packaging or reasonable substitute to prevent damage. Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address.

Please include your check or money order in the amount of USD $5.00 for items $10.00 to $39.99 (Price Paid Per Unit)

• USD $10.00 for items $40.00 to $99.99 (Price Paid Per Unit)
• USD $16.00 for items $100.00 and up (Price Paid Per Unit)
• Shipping fees are non-refundable

to be payable to Innovative Technology Electronics LLC. (For handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any / all of the necessary information.

Innovative Technology Electronics LLC. 1 Channel Drive
Port Washington, NY 11050 Toll free: 1-877-483-2497
Website for support: www.ithomeproducts.com/support

There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.

FAQ’s

• How can I restart my Victrola Bluetooth record player?
  To do this, simply raise the tonearm and move it farther to the right (beyond where it is resting) until you hear a clicking sound. It signifies a reset of your record player. Your Victrola will then begin to spin once more.

• Why isn’t the music on my Victrola record player playing?
  Please try adjusting the screw on the rear of the turntable by turning it a quarter turn at a time if your records are not playing correctly or the turntable is not spinning, and then try playing a record.

• Why is the blue flickering on my Victrola?
  That indicates that it is making an effort to pair with the Bluetooth device you are now using. And if my Bluetooth is turned on and my spouse tries to connect to it with his Bluetooth, I’ll need to turn it off on my phone because it will want to connect to that one automatically and can only connect to one at a time.

• How do I make the Bluetooth on my Victrola function?
  Look for the Bluetooth activation button on your record player and speakers. If you don’t see the Bluetooth logo on this button, consult the user guide for your particular device if it isn’t the Bluetooth logo. Your devices will join the Bluetooth network after you press this button.

• How can I put up the Bluetooth on my Victrola?
  This setup will be quite simple if your turntable has a built-in preamp. Simply plug the RCA input side of your cable into the turntable and the 3.5mm side of your cable into your Bluetooth speaker to connect your turntable to your house speakers.

• Why isn’t my Victrola playing music?
  The machine isn’t plugged in properly, which is the most frequent cause. The fuse should be examined after you’ve verified that the power cord is connected in correctly. Check your owner’s handbook for the appropriate type of fuse because Victrolas use a unique kind of fuse.

• Is Victrola a reliable company?
  Both Crosley and Victrola are low-end brands. They provide functional, low- cost record players, but their craftsmanship won’t wow anyone. They don’t sound great, and they typically only have the most fundamental features. However, they offer good value.

• Is the sound on the Victrola good?
  This one is really simple to use and has excellent sound. I adore the style. My friends remark on how contemporary it looks. Would suggest for anyone searching for a straightforward record player.

• Do Bluetooth transceivers actually function?
  TVs may send high-quality audio to speakers using a Bluetooth transmitter. A Bluetooth signal is broadcast by the transmitter, connecting it to an appropriate device. The transmitter connects to the analogue or digital output of the object you want to control and transmits a signal there.

• Why is the speed on my Victrola record player so high?
  The platter will spin too quickly if the belt comes out of the groove while the turntable is being used and is able to move up and down on the spindle. The belt’s placement on the platter’s inner ring has to be adjusted.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>