VICTROLA VPB-200 1 Portable Bluetooth Speaker Instruction Manual
- June 3, 2024
- Victrola
Table of Contents
MODEL: VPB-200
INSTRUCTION MANUAL
PLEASE READ INSTRUCTION MANUAL CAREFULLY BEFORE USE AND KEEP IT FOR FUTURE REFERENCE
OVERVIEW
- Volume Up
- Multi-Function Button ( O ) (Play/Pause and Next/Previous)
- Volume Down
- Bluetooth Button ( )
- Power Button ( )
- LED Indicator
- USB-C Charge Port
- Wrist Lanyard Connection
Power On / Off ………….. Long Press (1 sec) button
Volume Up ……………………………………….. Press + button
Volume Down ……………………………………. Press – button
Play/Pause ……………………………… Single Press O button
Next Track …………………………… Double Press O button
Previous Track ………………………… Triple Press O button
Enter MP3 USB Mode ………….. Press and hold (5 sec) O button
Bluetooth Mode ……………………….. Single Press button
Pair a Device …………………… Long Press (1 sec) button
Disconnect Bluetooth Device …. Press and hold (5 sec) button
Factory Reset …………….. Press and hold O button (10 sec)
BLUETOOTH PAIRING
Press the button to begin Bluetooth Pairing. (Flashing Blue light)
Wait for the “ Victrola ME1 ” to appear on your available devices list of your external device and press “ Victrola ME1 ”
Once paired, the ME1 will play a paired chime and the light will turn solid Blue for 2 seconds
USB-C MP3 PL AYBACK
Long Press the O Button until the LED flashes Orange, then turns solid Orange.
The unit is now in USB MP3 Playback mode. Use the O button to play, pause and skip MP3 files from a connected USB-C Flash drive (See Overview Controls) (USB-C Flash drive not included)
DUAL SPEAKER PAIRING
Press the and O button simultaneously for 1 second on BOTH speakers to
enter Dual Speaker Pairing Mode (Flashing Purple light)
PAIRING COMPLETE: Chime and solid purple LED indicate speakers are
connected (speakers always connect in MONO mode)
MONO/STEREO CHANNEL SWITCHING: After Dual Speaker Pairing is connected,
press the and O button on EITHER speaker to switch between MONO and
STEREO pairing mode
STEREO MODE - The right channel will flash purple 3 times quickly
MONO MODE – Both units will be solid purple for 2 seconds
TO DISCONNECT: Press and hold and O button on EITHER speaker for 5 seconds to disconnect dual-speaker pairing
PLEASE NOTE:
-If BOTH devices are in Dual Speaker Pairing Mode and do not connect, try
placing speakers closer together.
-Dual Speaker Pairing only works with another Victrola Music Edition 1 speaker.
BATTERY STATUS
CHECK BATTERY LEVEL
Single press button when unit is powered on to view battery level
LED Indicator Color Battery Level
Green ………………………………………………… 50-100%
Orange ………………………………………………. 26-49%
Red …………………………………………………….. 10%-25%
Flashing Red ………………………………………. < 10%
Flashing White …………………………………… Charging
OFF (while plugged in) ……………………… Fully Charged
SPECIFICATIONS
GENERAL
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5kg
Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . φ50mm
Frequency response . . . . . . . . . . . . . . . . 80Hz-20KHz
Battery working time . . . . 12 hours (varies by audio content and volume
level)
Charging time . . . . . . . . . . . . . . . . . . . . 2.5 hours
Charging port type . . . . . . . . . . . . . . . . Type-C
Battery type . . . . . . . . . . . . . . . . . . . . . . Rechargeable Li-ion,
Battery7.4V / 2500mAh
BLUETOOTH
Bluetooth Version . . . . . . . . . . . . . . . . . Bluetooth V5.0
Bluetooth Profile . . . . . . . . . . . . . . . . . . A2DP V1.3, AVRCP V1.6
Bluetooth Frequency Range . . . . . . . . . 2402-2480MHz
Operating Distance . . . . . . . . . . . . . . . . 10 meters (33 ft.)
BT Transmitting Power . . . . . . . . . . . . . . 4.2dBm
BT Transmitting Modulator . . . . . . . . . . GFSK, π /4DQPSK, 8DPSK
INCLUDED:
ME1 Speaker, Manual, Wrist strap, USB-C Charging Cable
Design and specification are subject to change without notice
Bluetooth is a registered trademark of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners
Designed in Denver, Colorado | Made in China
SAFETY INSTRUCTIONS
1. Read these instructions - All the safety and operating instructions
should be read before this product is operated.
2. Keep these instructions - The safety and operating instructions should be
retained for future reference.
3. Heed all warnings - All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow all instructions - All operating and use instructions should be
followed.
5. Clean only with a dry cloth.
6. Do not block any ventilation openings. Keep at least 5 cm around the
apparatus for sufficient ventilations. Install in accordance with the
manufacturer’s instructions.
7. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
8. Do not defeat the safety purpose of the polarized or grounding plug. A
polarized plug has two blades with one wider than the other. A grounding plug
has two blades and a third grounding prong. The wide blade or the third prong
is provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
9. Protect the power cord from being walked on or pinched particularly at the
plugs, convenience receptacles, and at the point where they exit from the
apparatus.
10. Only use attachments/accessories specified by the manufacturer.
11. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart or rack is used, use
caution when moving the cart/apparatus combination to avoid injury from tip-
over.
12. Unplug the apparatus during lightning storms or when unused for long
periods of time.
13. Refer all servicing to qualified personnel. Servicing is required when
the apparatus has been damaged in any way, such as power supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus,
does not operate normally, or has been dropped.
14. Please keep the unit in a well ventilated environment.
15. Only use attachments/accessories specified or provided by the
manufacturer.
16. The main plug is used as disconnect device, the disconnected device shall
remain readily operable.
17. This product is not intended for commercial use. Household Use Only.
18. This equipment is a Class II or double insulated electrical appliance. It
has been designed in such a way that it does not require a safety connection
to electrical earth.
19.
The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
|
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO PREVENT RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PROFESSIONAL.
|
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
---|---|---
Warning: To reduce the risk of fire or electrical shock, do not exposed
the apparatus to rain or moisture. No naked flame sources such as candles
shall be placed on top of the apparatus.
Caution: Changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this device. Usage of
controls or adjustments or performance of procedures other than those
specified herein may result in hazardous exposure.
Battery Risk of explosion if the battery is replaced by an incorrect
Caution: type; disposal of a battery into fire or a hot oven, or
mechanically
crushing or cutting of a battery, that can result in an explosion; leaving a
battery in an extremely high temperature surrounding environment that can
result in an explosion or the leakage of flammable liquid or gas; a battery
subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
FCC WARNINGS
FCC REGULATORY COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the
receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
FCC RADIATION EXPOSURE STATEMENT
This equipment complies with FCC and Canada radiation exposure limits set
forth for an uncontrolled environment. This transmitter must not be co-located
or operating in conjunction with any other antenna or transmitter.
ISED REGULATORY COMPLIANCE
This device contains licence-exempt transmitter(s) / receiver(s) that comply
with Innovation, Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: (1) This device
may not cause interference. (2) This device must accept any interference,
including interference that may cause undesired operation of the device.
ISED RADIATION EXPOSURE STATEMENT
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolled environment. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
HVIN: VPB200
WARRANTY
Victrola is a registered trademark of Innovative Technology Electronics, LLC.
United States
Victrola (Innovative Technology Electronics, LLC) warrants to the original retail purchaser that this product will be free from defective materials and workmanship for one (1) year from the date of purchase, subject to the limitations below. This warranty period is not extended if we replace the product.
To obtain a replacement under the terms of this warranty, you must contact the dealer from which it was purchased with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at victrola.com/contact.
Except as limited below, if the product proves defective in either material or workmanship within one (1) year from the date of purchase, Victrola will replace the product at no charge. If the product model is no longer available and cannot be replaced with an identical model, Victrola will issue a merchandise credit for the purchase price to be redeemed at victrola.com.
Limitations:
- This limited warranty does not cover failure of the product arising, in whole or in part, from improper installation, storage, transportation, misuse, abuse, accident, neglect, mishandling, unauthorized repair, modification, or wear from ordinary use or environmental deterioration.
- This limited warranty does not cover cosmetic damage, including paint damage, or consequential damage to other components or premises which may result for any reason from the failure of the product.
- This limited warranty is null and void for products not used in accordance with Victrola’s instructions.
- This limited warranty terminates if the original retail purchaser sells o otherwise transfers this product.
- This limited warranty is null and void for defects or damage caused by installation or repair performed by any person or entity other than a Victrola authorized installer or dealer.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state, jurisdiction to jurisdiction or country to country. All express and implied warranties for the product, including but not limited to any implied warranties of merchantability and fitness for a particular purpose, are limited in time to the term of this warranty. Some states, jurisdictions or countries do not allow the exclusion of certain implied warranties or conditions, or limitations on how long an implied warranty or condition lasts, so this limitation may not apply to you. Victrola’s responsibility for malfunctions and defects in hardware is limited to replacement or repair as set forth in this warranty statement. Victrola does not accept liability for special, punitive, consequential or incidental damages or losses, whether direct or indirect, including without limitation, any liability for third party claims against you for damages or losses or for products not being available for use. The maximum liability for which Victrola may be responsible will be no more than the amount you paid for the product that is the subject of the claim. Some states, jurisdictions or countries do not allow the exclusion or limitation of special, indirect, incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Canada and US Territories
The Warranty on this product shall comply with applicable law when sold to a consumer in Canada or a US Territory. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt. If assistance from the dealer from which it was purchased is impossible, you may contact our customer service for warranty assistance at victrola.com/contact. If this product proves defective in either material or workmanship, Victrola will replace the product at no charge. If the product model is no longer available and cannot be repaired effectively or replaced with an identical model, Victrola at its sole option may replace the unit with a current model of equal or greater value.
Outside the U.S, Canada, and US Territories
The Warranty on this product shall comply with applicable law when sold to a consumer outside of the United States, Canada, and US Territories. To obtain any applicable warranty service, please contact the dealer from which you purchased the product, or the distributor that supplied the product, with your original receipt.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>