VICTROLA EC-70 Wireless Speaker Table User Manual

: June 4, 2024
: Victrola

Table of Contents

PARTS LIST
ASSEMBLY
INTRODUCTION
SPECIFICATIONS
IMPORTANT INFORMATION
FCC STATEMENT
Documents / Resources

EC-70
GALAXY LIGHT-UP
Wireless Speaker Table
ASSEMBLY INSTRUCTIONS
Please save it for future reference.

PARTS LIST

VICTROLA EC 70 Wireless Speaker Table - FIG 1

ASSEMBLY

Screw each leg(A) to the attachment point underneath the table(B).| When flipping the table(B) upside down, make sure to place it on a smooth flat surface
---|---

INTRODUCTION

VICTROLA EC 70 Wireless Speaker Table - FIG 3

A. LED MODE

Short press the “LED” button to power on the LED light.
Short press the “LED” button to cycle through 10 light modes.

B. POWER ON/OFF & MODE SWITCH

Long press the “P/M” button for 3 seconds to power on the speaker.
Long press “P/M” to power off the speaker.
Short press “P/M” to change audio mode.

C. PREVIOUS TRACK/VOLUME DOWN

Short press for the previous song.
Long press to lower volume.

D. PLAY/PAUSE

Short press to play the song.
Short press to pause the song.

E. NEXT TRACK/VOLUME UP

Short press for the next song.
Long press to raise the volume.

F. USB PORT

Play music from the USB drive.

G. CHARGING PORT

Plug in any USB charging cable to charge any smartphone device. (Only to be used when the table is fully charged and DC Cable is NOT plugged in)

H. AUX PORT

Insert one end of a 3.5mm aux cable into the provided port and the other end into any mp3 player/mp4 player/ your smartphone device or any compatible device.
Short press “M” to cycle through modes and find audio input mode.

I. CHARGING THE TABLE

Using the provided DC charging cable and UL adapter, connect the DC charging cable to the “DC ON” port to charge.
While charging, there will be a red light. Once fully charged, the red light will remain on.

BLUETOOTH PAIRING

Once powered on, a blue light will flash
Search the “Galaxy” pairing name in the Bluetooth list
Once successfully connected, you will hear a confirmation sound
The speaker will automatically connect next time

SPECIFICATIONS

Bluetooth version: V5.0
Impedance: 4Ω
Power: 10W
Battery capacity: 3600mAh
Charging input: 5 V 2A
Wireless charging: 5W

IMPORTANT INFORMATION

When you power on the speaker and do not pair the Bluetooth for 20 mins, the speaker will power off automatically and will have a reminder sound.
Read this manual carefully before using this device and keep it for future reference.
Keep the device away from heat, direct sunlight, and sharp edges.
Do not insert any metallic object into this device, it’s a risk of short circuit!
Please avoid a static charge, do not use the device in an extremely dry climate.
Do not repair the unit by yourself, contact an authorized specialist.

WIRELESS CHARGING

Plug in your table Speaker with the included Charging Cable (C)
Place your wireless charging-enabled device in the middle of table (B)

VICTROLA EC 70 Wireless Speaker Table - FIG 4

Your device needs to be able to charge wirelessly for this function to work.
The table must be plugged in for the wireless charging function to work.
If your device isn’t charging properly please try the following:

Remove your device from its case.
Remove any elements or accessories in between the table speaker and your device.
Make sure your device is placed right in the middle of the table.

BEFORE USING THIS PRODUCT
PLEASE CAREFULLY READ THE INSTRUCTIONS FIRST.
CUSTOMER SUPPORT
For any questions or concerns regarding this product please email us at:
WARRANTY
To register your product and warranty information please visit www.ihip.com
© 2021 brand. iHip is a trademark, Registered in the U.S. and other countries. All Rights Reserved. The illustrated product and specifications may differ slightly from that supplied. All other trademarks and trade names are those of their respective owners. For ages 12+up. This is not a toy. Limited One Year Warranty.
Designed by iHip in the U.S.A., Manufactured in China.
iHip
19 Progress St. Edison, NJ 08820
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by “iHip” is under license. Other trademarks and trade names are those of their respective owners.

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁcations to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

PLEASE READ BEFORE USE