Tenda SP9 Smart Wi-Fi Plug with Energy Monitoring Installation Guide
- June 5, 2024
- Tenda
Table of Contents
Tenda SP9 Smart Wi-Fi Plug with Energy Monitoring
CD LEO indicator
CD LEO indicator
Blinking orange: Initializing and starting
Solid orange: Not connected to a 2.4 GHz WiFi network
Blinking blue: Connecting to a 2.4 GHz WiFi network
Solid blue: Connected to a 2.4 GHz WiFi network
Off: Powered off, or turned off using the App or
voice-activated devices
@Button
• Press It to turn on/off the socket.
• Hold it down for about 5 seconds and release it when the LED indicator
blinks orange. The Smart Plug is restored to factory settings successfully.
Follow the
on-screen instructions in the App to configure it again.
Configure the Smart Plug
-‘ CJ- Note:
- The Smart Plug only supports 2.4 GHz WiFi network. • The default SSID (WiFi name) of the Smart Plug is Tenda_Smart Plug_xxxx. XXXX indicates the last four characters of its MAC address which can be found on the device.
- Download the Tenda Beli App onto your mobile WiFi-enabled device, such as a smartphone, by searching for Tenda Beli in the App Store or Google Play or by scanning the QR code. Then, install the App.
- Follow the instructions in the App to configure your Smart Plug.
FAQ
-
Q1: What devices can I control with the Smart Plug?
A1: You can control desk lamps, coffee makers, humidifiers, tower fans, and any other small household appliances whose rated power does not exceed the maximum power of the Smart Plug. -
Q2: What should I do when the LED Indicator of the Smart Plug llghts solid orange?
A2: Try the following solutions:- Check whether the WIFI network of your wireless router Is enabled. If not, enable it.
- Check whether the WiFi name or password of your wireless router is changed. If so, reset the Smart Plug, and connect it to your wireless router again with the new WiFi name or password.
- Reset the Smart Plug, and reconfigure it using the Tenda Beli App. Reset method: Hold down the button of the Smart Plug for about 5 seconds and release it when the LED indicator blinks orange.
-
Q3: How to control the Smart Plug with voice-activated devices, such as Amazon Alexa or Google Assistant?
A3: In your Tenda Bell App, tap the Smart Plug in the Device page, then 8 > Q (for Amazon Alexa) or •t (for Google Assistant} to get the help. For more questions, please visit www.tendacn.com/enlfaqldefault.html to get online support.
Technical Support
- USA hotline: 1-800-570-5892 Hong Kong hotline: 00852-81931998
- Toll Free: 7 x 24 hours Global hotline: +86 755-2765 7180 (China Time Zone)
- Canada hotline: 1-888-998-8966
- Toll Free: Mon – Fri 9 am – 6 pm PST
- Website: www.tendacn.com
- E-mail: support@tenda.com.cn
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation Is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for
an uncontrolled environment and it also complies with Part 15 of the
FCC RF Rules.
Caution:
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate this equipment.
NOTE :
- The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
- To avoid unnecessary radiation interference, it is recommended to use a shielded RJ45 cable. For PLUGGABLE EQUIPMENT, the socket outlet shall be installed near the equipment and shall be easily accessible. For passthrough devices, plug the power strips into the integrated electrical sockets of the devices.