PROZIS AS108 Bluetooth Speaker User Manual
- June 5, 2024
- PROZIS
Table of Contents
User Manual
AS108
AS 108
Please follow the instruction in this guide to enjoy the best sound.
Package Contents
Operation Instruction
Hold Dutton to power on and off it will be in Bluetooth mode by default.
Short Press’ button to play-pause music (only works under Bluetooth mode .
Bluetooth Connection
Press the” button for 2 seconds to activate Bluetooth discovery mode.
Long press the” button to disconnect the speaker and slow new device to pair
with it.
Line In
Use “AUX IN’ to connect any audio device via a 3.5mm cable.
Shirt press the” buttons to switch AUX IN node then white LED flashes every 2
seconds.
Slat press’ . button again beck to Bluetooth mode then white LED flashes
quickly.
Handsfree
While connected to a smartphone in Bluetooth mode, you can short the’ ” button
to answer any incoming call and long-press the button to reject.
While talking, short press the’ button to end t e call.
Volume Control
Press the buttons to decrease or increase volume.
Charging
Connect the speaker via USB cable to any power source (USB charger, power bank, laptop, etc.) to charge the battery.
Specification
| Model No.: AS108
---|---
Size: 1008640mm
Output power: 5W *1
Input: USB 5V—1A
Frequency Response: 80Hz-18KHz
Battery Capacity: 1200mAh
| Product: Bluetooth Speaker
---|---
Bluetooth
AUX IN 3.5mm
Operate: Buttons
Material: ABS
SS S/N:>-=75db
Safety and Maintenance
FCC Caution：
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. Any changes or
modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>