VICTROLA VSC-400SB-Y Journey+ Bluetooth Suitcase Record Player User Manual

: June 5, 2024
: Victrola

Table of Contents

VICTROLA VSC-400SB-Y Journey+ Bluetooth Suitcase Record Player
SAFETY INSTRUCTIONS
SPECIFICATIONS
TURNTABLE OPERATION
BLUETOOTH OPERATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VICTROLA VSC-400SB-Y Journey+ Bluetooth Suitcase Record Player

SAFETY INSTRUCTIONS

Read these instructions-All the safety and operating instructions should be read before this product is operated.
Keep these instructions- The safety and operating instructions should be retained for future reference.
Heed all warnings-All warnings on the appliance and in the operating instructions should be adhered to.
Follow all instructions – All operating and use instructions should be followed.
Do not use this apparatus near water -The appliance should not be used near water or moisture-for example, in a wet basement, near a swimming pool, or near other wet areas.
Clean only with a dry cloth.
Do not block any ventilation openings. Keep at least 5 cm around the apparatus for sufficient ventilations. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. Ihe wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any wa, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Please keep the unit in a well ventilated environment.
Only use attachments/accessories specified or provided by the manufacturer
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on apparatus.
The main plug is used as disconnect device, the disconnected device shall remain readily operable.
This product is not intended for commercial use. Household Use Only.
This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth.
CAUTION : TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PROFESSIONAL.
ATTENTION :The lightning flash with arrowhead within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.
WARNING: The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

Warning : To reduce the risk of fire or electrical shock, do not exposed the apparatus to rain or moisture. No naked filame sources such as candles shall be placed on top of the apparatus.

Caution: Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate this device. Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous exposure.

SPECIFICATIONS

AC/DC Adaptor.
- Input: 100-240V, 50/60Hz, 0.2 Max
- Output : 5V==1A
- Power : 5W
Speaker Impedance: 4ohm, 3W
Max Power Consumption: 5W
- Included:.Turntable Operation Sheet, 5V/1A switching power supply, and 45 RPM adaptor

Design and specification are subject to change without notice. Bluetooth is a registered trademark of Bluetooth SIG, Inc. Other trademarks and trade names are those of their respective owners

TURNTABLE LAYOUT

TURNTABLE PLATTER
45 RPM ADAPTOR
TURNTABLE SHAFT
LIFT LEVER
TONE ARM CLIP
LINE-IN JACK
AUTO AND MANUAL STOP SELECTION SWITCH
FUNCTION (BT (BLUETOOTH), LINE-IN, PHONO, BT OUT (BLUETOOTH OUT) KNOB
SPEED SELECTION SWITCH
TONE ARM
POWER ON/OFF AND VOLUME CONTROL KNOB
POWER/BLUETOOTH LIGHT INDICATOR
STYLUS CARTRIDGE
HEADPHONE JACK
BUCKLE
HANDLE
SPEAKERS
RCA OUTPUT JACK
POWER ADAPTOR JACK

TURNTABLE OPERATION

POWER SUPPLY

Insert the adaptor plug into the DG IN jack on the rear of the unit, then connect the AC/DC adaptor (5V/1A AC 100-240V, 50-60Hz) to a AC/DC wall outlet.

BASIC OPERATION

Lift the BUCKLE on the front of the turntable and open the lid.
Turn the FUNCTION KNOB to the PHONO position. Power ON the unit by turning the VOLUME CONTROL KNOB clockwise. The red LED will light to show that the turntable is turned ON.
Place a record on the TURNTABLE PLATTER and select the desired speed (33 1/3/45/ 78) by sliding the SPEED SELECTION SWITCH according to the record.
NOTE : When playing a 45 RPM record, use the included 45 RPM ADAPTOR located in the holder near the tone arm.
Open the TONE ARM CLIP to release the TONE ARM. Push the LIFT LEVER backwards to raise the arm. Gently move the tone arm to the desired position over the record. The turntable will begin to spin when the arm is moved toward the record. Push the lift lever forward and lower the arm slowly onto the desired position on the record to begin playing.
Please Note : The record will begin to spin only when the tone arm is moved Over the record if the Auto Stop is turned ON.
If the AUTO AND MANUAL STOP SELECTION SWITCH is turned ON, the record will stop automatically when finished. If this switch is OFF the record will NOT stop automatically when finished.
To select the volume level, turn the VOLUME CONTROL KNOB to adjust the volume.

HOW TO REPLACE THE TURNTABLE NEEDLE (Replacement Needle # ITNP-S)

Removing the Stylus from the Cartridge

Set a screwdriver at the tip of the stylus and push down to the direction “A”.
WARNING : When applying force to stylus, too much may damage or break the stylus.
Pull the stylus out toward the direction “B”.

Installing the Stylus

Hold the tip of the stylus and insert the other edge by pressing toward direction “C”.
Push the stylus up toward direction “D” until it locks at the tip.

Caution :

Do not remove or bend the stylus needle.
Do not touch the needle to avoid injury to your hand.
Turn off the unit’s power before you replace the stylus.
Keep Keep out of reach of children.
Please note: The stylus should last about 50 hours under normal use. It is recommended that the stylus be replaced as soon as you notice a change in sound quality.

BLUETOOTH OUT OPERATION

The product supports Bluetooth wireless connection (BT OUT). It can be connected With external Bluetooth-compatible headphones (not included) and Bluetooth speakers (not included).

Power ON the unit by turning the VOLUME CONTROL KNOB clockwise.
Turn the FUNCTION KNOB to the BT OUT (Bluetooth Out) position, the red LEDp light will begin to flash.
Turn ON your external Bluetooth receiver device (such as Bluetooth headphones and Bluetooth speakers) and set to pairing mode.
When pairing is complete, you will hear a chime and the red LED light will stop flashing. (his may take approximately 15-30 seconds)
You are now connected to your external Bluetooth device.
Place a vinyl record on the turntable. Ihen move the tone arm to desired playing position on the vinyl record and sound will be heard from the external Bluetooth speaker. (You can ONLY adjust the volume from your external Bluetooth device.)
Place the Bluetooth device within Tm (3.3) of the product to perform pairing correctly.
The product stays in the pairing mode for 30 seconds. If pairing is not properly completed, follow the above steps again from the beginning after turning all devices OFF
“BT OUT” is only compatible with vinyl record playback. BT OUT will NOT work in AUX or regular Bluetooth (BT) function modes.

BLUETOOTH OPERATION

An external device with Bluetooth Connectivity can be wirelessly connected to this turntable using the Bluetooth function.

Power ON the unit by turning the VOLUME CONTROL KNOB clockwise.
Turn the FUNCTION KNOB to the BT (Bluetooth) position, the blue LED Iight will begin to flash.
Turn your external device’s Bluetooth Setting ON. Wait a moment, then look for the Bluetooth pairing name “Victrola Journey +”.
Select the Bluetooth pairing name, to connect the unit. Once connected, the blue LED light will stop flashing.
You are now connected to your external device via Bluetooth!
Rotate the VOLUME CONTROL KNOB to adjust the sound level.

AUX-IN OPERATION

An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or computer) can be connected to this apparatus via the LINE-IN JACK.

Plug a detachable Aux Cable (not provided) into the LINE-IN socket on the function panel or tne apparatus.
Turn the FUNCTION KNOB to the LINE-IN position, the LED will turn purple.
Plug the other end of the AUx Cable into the Headphone or Line Out socket of your External Source.
Power ON the unit by turning the VOLUME CONTROL KNOB clockwise.
Hotate the vOLUME CONIROL KNOB to adjust the sound level.

HEADPHONE OPERATION

Plug the earphone jack into the earphone pot on the function panel to listen to the record. The built-in speaker will stop playing once the earphones are plugged in.
NOTE : For best performance and product maintenance, unplug the turntable when not in use.

FCC STATEMENT

This device complies with Pat 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CALIFORNIA PROP 65 WARNING

WARNING : This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.Pb5warnings.ca.gov,

IC WARNING

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference; and
This device must accept any interference, including interference that may cause undesired operation of the device.

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body

WARRANTY

Victrola is a registered trademark of Innovative Technology Electronics LLC. Innovative Technology Electronics LLC.
Limited Warranty : 90 Days Labor, One Year Parts

Innovative Technology Electronics LLC. (IT) warrants the product to be free from “Defects” in The materials under normal use for a period of “One Year” from the date of the original purchase. The Warranty IS “Not transferable. I agrees, within the initial “90 Day period, to repair or replace the product if it is determined to be defective at “No Charge”. It is further agreed that IT will cover the cast to repair or replace damaged “Parts only for a total period of “one Year from the date of the original purchase. he warranty does not cover cosmetic damage, antennas, A cords, cabinets, headbands, ear-pads, or damage due to line power Surges, connection to improper voltage supply or settings, misuse, mishandling, accident, acts of God or attempted repair by an unauthorized service agent.

To obtain service, the purchaser MUST present an original sales receipt/ proof of purchase. Please contact us at www.victrola.com to request an RMA (Return Material Authorization) number to return products for service or replacement. Returns without an RMA number on the package will be refused and returned to sender. Upon receipt of the returning item and our full inspection ( may issue a replacement to customer for the same item or of one that has equivalent value and features. o return an item, supply Tull name, return address, phone number, item purchased, receipt of purchase and reason for return to obtain RMA number. All returns must be in the original packaging or reasonable substitute to prevent damage. Customer Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address.

All returns must be in the original packaging or reasonable substitute to prevent damage. Customer “Must” include full name, shipping address and telephone number inside of package. No return will be shipped back to a PO Box or APO address.Please include your check or money order in the amount of:

USD $5.00 for items $10.00 to $39.99. (Price Paid Per Unit)
USD $10.00 for items $40.00 to $99.99. (Price Paid Per Unit)
USD $16.00 for items $100.00 and up. (Price Paid Per Unit)
Shipping fees are non-refundable.

to be payable to Innovative technology Electronics LLG. (for handling and return shipping charges) (IT)will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any/ all of the necessary information. Send all inquiries or RMA request via our website www.victrola.com/pages/technical-support. Innovative Technology Electronics LLC. , 1 Channel Drive , Port Washington, NY 11050 Toll free: 1-877-483-2497
Website for support: www.victrola.com/pages/technical- support

There are no express warranties except as listed above.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CUSTOMER, (IT) SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY OF THIS PRODUCT EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED IN DURATION TO THE DURATION OF THIS WARRANTY
Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.