Ge Lighting CPLGOD2BLG1 Outdoor Smart Plug User Manual

Outdoor Plug
Quick Start Guide

Simple DIY Setup

1. Identify where you want to mount your plug.

2. Mark the location for the hole to be drilled.

3. Using a 3/16″ bit, drill a hole in the wall mounting screw.

4. Install screw-in desired location leaving 3/16″ of the screw exposed.
   

5. Align the mounting hole with screw head, slide the bracket over the screw head, and let the plug drop-down to lock into place.

Mount Plug Vertically with Sockets Facing Downwards

Unplugging Outdoor Plug

How to Set Up and Enable Voice and Out of Home Control for your Plug and Devices

1. Plug your smart outdoor plug into the outlet.

2. Download the C by GE app.
   

3. Add the Outdoor Smart Plug to the C by GE app.

4. To enable voice control with  Amazon Alexa or Google Home, enable C by GE within your voice assistant app and find your devices.
   Voila! Now you can control your outdoor lights and devices with your voice and away from home.

Connect with your Google Assistant or Amazon Alexa device to control your outdoor lights and devices with your voice.
Try these voice commands:
Amazon Alexa
Alexa, turn off front yard.
Alexa, good morning.
Alexa, turn on the patio lights.

Google Home
Okay Google, turn on the fountain.
Okay Google, turn off the Christmas lights.
Okay Google, turn on the party scene.

Additional Information and Warnings

FCC Compliance Statement Compliance Notice:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This device complies with Industry Canada’s license-exempt RSSs. Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

WARNING: Electric Shock.
To reduce the risk of electric shock, this product is equipped with a cord with a grounding-type plug. This plug must be plugged into an outlet that is properly installed and grounded. Contact a qualified electrician to install a proper outlet if doubt exists as to whether the product is properly grounded. Do not change the plug in any way.

• When not in use, the sockets should remain capped with a weather-resistant cover.
• Mount vertically with the sockets facing downward and be at least 30cm above ground level.
• To remove a plug from the outdoor plug, hold the outdoor plug’s housing and pull the plug out.

Outdoor Smart Plug CPLGOD2BLG1
Input: 120V AC 60Hz
Output: General use, maximum 15A in total
Motor, maximum 1/3HP
Operation temperate: -20oC ~ 50oC IP64
Rainproof Type 3R Enclosure
Type 1 action
Pollution Degree 3
Rated impulse voltage: 1500V
The supply cord of this control can be replaced only by the manufacturer or his accredited service agent.

Like your new C by GE Outdoor Plug?
Share your experience!
Leave a review of where you purchased the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>