CHEN SHUO BT5.0 Airpods Wireless Bluetooth Earbuds User Manual
- June 5, 2024
- CHEN SHUO
Table of Contents
CHEN SHUO BT5.0 Airpods Wireless Bluetooth Earbuds
User Manual
Model No.: BT5.0
FCC ID: 2AWWJ-AIRPODBT5
| NO. | Function | Operation method | NOTE |
|---|---|---|---|
| 1 | power on | Press and hold the function key for 3 seconds, the red and blue | |
| lights flash alternately, and the voice prompt is: power on | |||
| 2 | Shut down | Press and hold the function key for 5 seconds, the red light | |
| flashes, and the voice prompt is: power off | |||
| 3 | pair | In automatic pairing mode, the two headphones are turned on, and the |
prompt tone: pairing, pairing left and right automatically, after the pairing
is completed, the host red and blue lights flash alternately, the auxiliary
lights are off, and the voice prompt is: connected|
4| Connected devices| Open the Bluetooth device search, search the headset
model, and click the corresponding model to connect, after the connection is
successful, the voice prompt is: connected (connected), the host light is
off;|
5| Connected devices (Popup version)| After the headset is successfully
paired, the Apple phone will display a pop-up window. Click “Connect via
iCloud” to automatically connect the phone. The voice prompt is: Connected
successfully (connected), the host light is off;|
6| Bluetooth disconnect| The mobile phone is actively disconnected or exceeds
the use range, the voice prompt is: disconnected (disconnected);|
7| Chinese and English prompt switch| With the headset turned on and not
connected to any device, double-click the headset;|
8| play / Pause| When playing music, press any headset function key to switch
between pause and playback. Under music playback, the main and auxiliary
headset LEDs are all off.|
9| Switch songs| When playing music, double-click the main ear function key to
switch to the previous song, and double-click the auxiliary ear function key
to switch to the next song|
10| Volume up/down| The volume of the triple tap of the main ear is increased;
the volume of the triple tap of the second ear is decreased;|
11| Last Number Replay| Four strikes with the left or right ear|
12| Answer/end call| Press the function key once to answer the call, and press
it again to hang up|
13| Reject call| Long press the function key for 1.5 seconds|
14| Start out| The charging compartment has a maintenance voltage|
15| Wake up Apple Assistant| Press and hold the function key for 2 seconds,
and then release it after hearing the prompt tone to wake up the Apple SIR I
Assistant|
16| Automatic shut-down| 3 minutes|
17| Earphone charging| 1. Put the headset back into the charging compartment,
turn on the charging compartment switch, and the headset automatically shuts
down and disconnects from the device, the headset’s red light is always on,
and the light is off when fully charged. After the headset is fully charged
for 1 minute, the charging compartment is automatically closed switch;
2. During the charging process of the headset, press the charging compartment
button to turn off the charging of the headset, and the headset will be shut
down immediately;
3. Take out the headset from the charging compartment, the headset will
automatically turn on;|
18| Charging
compartment
charging| 1. Plug in the USB cable, and the charging compartment starts to
charge. During the charging process, the red light flashes slowly; when fully
charged, the red light is always on;
2. When charging the headset with the charging compartment, the blue light is
always on, and when the headset is full, the blue light is off;|
Warning:
Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF exposure compliance statement:
This device has been evaluated to meet the general RF exposure requirement