itek MP-132A Universal Wireless Charger Pad Instruction Manual
- June 5, 2024
- itek
Table of Contents
itek MP-132A Universal Wireless Charger Pad
Getting started
- Remove the product from the box.
- Please retain all packaging after you have checked and counted all the parts and the contents against the list.
Package Contents
- Universal Wireless Charger Pad
- USB cable
- Instruction Manual
Key Features
- Convenient & fast charging, wireless, hassle free & great looking charging pad
- Charge your phone by placing it on this pad immediately. No need attaching any cable to phone
- Runs low temperature as wired charger
- Input: 5V/2A, Output: 5V/1A
- Friendly Blue LED indicators, never overchares your battery or wast energy
- Non-slip ring set in charging area & pads on the bottom. Keep phone & charger from sliding
- Suitable for Qi compatible phones like iPhone 11/11 Plus/11 Pro/11 Pro Max, iPhone X/ xS /XR / XS Max, iPhone 8/8 Plus, Samsung Galaxy $20/s20 Plus/S20 Ultra, $10/$10 Plus, S9/$9 Plus, S8/$8 Plus, HTC, Nexus and more.
Safety Instructions
- Keep the product away from heat sources, direct sunlight, humidity, water and any other liquids.
- Do not operate the product if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the product.
- Do not use the product if it has been dropped or damaged in any way.
- Repairs to electrical equipment should only be performed by a qualified electrician.
- Improper repairs may place the user at serious risk.
- Do not use the product with wet hands.
- Do not put objects into any of the openings.
- Keep the product free from dust, lint etc.
- Do not use this product for anything other than its intended use.
- Keep the product out of reach of children.
- This product is not a toy
Description of Parts:
INSTRUCTIiONS FOR USE
- Connect the USB cable (included) to a power outlet rated DC 5V/2A, and the Micro USB plug to the Micro USB input of the Wireless Charging Pad. Red light around the unit will turn on.
- Place your Qi Integrated phone on the charging pad, and wireless charging of the phone will start immediately with auto-change of Blue light intensity around the unit.
IMPORTANT: Some phone cases do not support Wireless Charging due to their thickness and design. if your Phone model is compatible with Wireless Charging and you’re unable to charge it wirelessly, please remove your phone case and retry.
Care and Maintenance
- Read the following recommendations before using the product. Following these you will be able to enjoy the product for many years.
- Do not expose the Wireless Charging Pad to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
- Don’t use abrasive cleaning solvents to clean the device.
- Do not expose the device to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
- Don’t dispose of the device in a fire as it will result in an explosion.
- Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
- Don’t let the device fall on the floor. The internal circuit might get damaged.
- Don’t attempt to disassemble the device as it may get damaged if you are not professional.
Specifications
- Input: DC 5V/2A
- Output: DC 5V/1A
FCC Instructions
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving an tenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.