iTek ITMF40I141WQHD Monitor Flat 40 Inch User Manual

iTek ITMF40I141WQHD Monitor Flat 40 Inch

Specifications

• Resolution: WQHD
• Interface: HDMI, DisplayPort, Type-C
• Box Contents: Monitor, Stand Stem, Stand Base, Screws for stand installation and wall mounting, VESA Adapter, DP Cable, Type-C Cable, Power Cable, Screwdriver, User Manual

Product Overview

Monitor Buttons

• Power Button: Press the rocker to turn the display on/off.
• Scene Mode: Rocker left for scene mode switching.
• LED Effects: Rocker backward for LED effects.
• Main Menu: Rocker right for the main menu.
• GamePlus: Rocker forward for GamePlus feature.

Monitor Ports

• HDMI Connectors: Connect the computer’s HDMI output to the monitor’s HDMI port.
• DisplayPort: Connect the computer’s DP output to the monitor’s DP port.
• Type-C: Connect the computer’s Type-C output to the monitor’s Type-C port.
• Audio Output: For audio signal output.
• Power Connector: Insert power cable to supply power to the monitor.

Stand Installation

1. Unpack the carton and lay it flat on the desktop.
2. Secure the bracket and base with provided screws.
3. Attach the base assembly to the rear case ensuring proper fit and locking.

Mount Installation

1. Unpack the carton and lay it flat on the desktop.
2. Note that screws for the VESA mount are included. No VESA mount is provided.

FAQ

1. Q: Can this monitor be mounted on a wall?
   A: Yes, this monitor can be mounted on a wall using the provided screws and a VESA mount (not included).

2. Q: How do I switch between scene modes?
   A: Use the rocker button on the monitor to switch between different scene modes.

ITMF40I141WQHD

User Manual

For more information please visit our website or write us an email: https://www.itekevo.com info@itekevo.com

Safety Precautions

WARNING: Safety Instructions
Do not place the monitor in rain, or humid environments or open the monitor case to avoid any shock, electrical hazards, and/or mechanical hazards.

Operation

• Keep the monitor out of direct sunlight and away from stoves or any other heat source.
• Keep the monitor out of water source.
• Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
• Do not block the ventilation holes.
• Do not knock or drop the monitor during operation or transportation.

 Maintenance Guidelines

CAUTION
Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

Caring For Your Monitor

• To clean your screen, slightly dampen a soft, clean cloth with water, If possible, use a special screen-cleaning tissue or solution. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
• Use a slightly dampened, warm cloth to clean the frame. Avoid using detergent of any kind as some detergents might leave a milky film on the plastics.
• Unplug the monitor if you are not going to use it for an extended period of time.
• To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. If your monitor gets wet, wipe it with dry cloth as soon as possible.

HIGH-DEFINITION MULTIMEDIA INTERFACE
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Box Contents

Product Overview

Monitor Buttons

1. Press the rocker to turn the display on/off.

2. Rocker left scene mode switching.

3. Rocker backward LED Effects.

4. Rocker right Main Menu.

5. Rocker forward GamePlus.
   Monitor Ports

6. HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor’s HDMI port.

7. DP Connector: Insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.

8. Type-c: Insert one end of the Type-c cable into the computer’s Type-c output and connect the other end to the monitor’s Type-c port.

9. Audio Output: Insert the audio cable for output of audio signals.

10. Power Connector: Insert the power cable to supply power to the monitor.
    

Stand Installation

1. Unpack the carton, take out the upper and lower covers of Styrofoam, and lay it flat on the desktop. Remove the top cover of Styrofoam, then take the body out of the film-coated bag and place it in the cavity of the lower cover of Styrofoam again.
   

2. Take out the bracket and base, and lock them with three PM5*15mm screws (One extra spare screw is provided), as shown in the figure below.

3. As shown in the figure above, put the base assembly assembled in step 2 into the corresponding slot of the rear case, gently press the bracket to fit the shaft assem­bly into the lock, and then hold the middle of the bracket and lift it up twice, and tripped to ensure that the buckle can lock the base assembly. When disassembling, follow the reverse steps.
   

Make sure the monitor is laid on a flat surface before removing the stand.

Mount Installation

This monitor only includes screws which may be used when attaching the monitor to a VESA 75*75mm type mount. No VESA mount or mounting accessory is included.

1. Unpack the carton, take out the upper and lower covers of Styrofoam, and lay it flat on the desktop. Remove the top cover of Styrofoam, then take the body out of the film-coated bag and place it in the cavity of the lower cover of Styrofoam again.

2.  As shown in the figure above, take out the wall-mounted adapter and four PM4*16 screws from the accessories, assemble them in the middle of the whole machine, and lock them with a screwdriver. (Assembling and disassembling the screws, the display screen cannot leave the Styrofoam to prevent the screen from breaking)
   

3. Do not pinch the screen directly with your hands during the process of hanging the product.

Connectivity Options

Connecting the Power Cable

Connect the included power cable to the power connector and then plug the other end into a wall outlet.

Connecting Your Earphones
Plug in your earphones to receive audio signals from your monitor. If you have an audio device connected to your computer when you connect your earphones to the monitor, the audio devices will not produce sound. Earphones and other audio devices are not included.

Exposure to loud audio for prolonged periods of time may permanently damage your hearing.

DP Connectivity
For the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer.

HDMI Connectivity
For the monitor to receive HDMI signals from the computer, use an HDMI cable to connect the monitor to the computer.

Basic Operation

1. Insert one end of the DP cable into your PC’s graphics card. An HDMI cable may also be used. HDMI cable is not included.

2. Connect the other end of the cable to the corresponding connector on your monitor.
   

3. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.

4. Locate the power button on the monitor and press it to turn the monitor on.

Indicator Light

Solid blue light indicates power is on and the monitor is operating normally. Red and blue flash alternately during standby. Red when shutting down.

On-Screen Display (05D)

The On-Screen Display (0SD) Menu may be used to adjust your monitor’s settings and appear on the screen after turning on the monitor and pressing the M button.
When optimal using settings the monitor according to your first time, the computer’s settings will configure automatically and parts adjust, etc.

1. Press one of the buttons( to activate the navigation window.

2. Press ( to enter the 0SD screen.
   

3. Press browse function.

   • Select the desired function and press O to enter the submenu.
   • Press browse the submenu, and then press O to confirm the selection of the desired function.
   • Press select an option, then press O to confirm the settings and exit the current menu.

4. Press to exit the menu interface.

1- OSD Menu Functions

Technical Specifications

References

• Homepage - Itek

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>