Itek ITMC27V241QHD GGC Monitor User Manual

June 4, 2024
itek

ITMC27V241QHD GGC Monitor
User Manual

For more information please visit our web site or write us an email:
https://www.itekevo.com
info@itekevo.com

Safety Precautions

WARNING: Safety Instructions
Do not place the monitor in rain, or humid environments or open the monitor case to avoid any shock, electrical hazards, and/or mechanical hazards.
Operation

  • Keep the monitor out of direct sunlight and away from stoves or any other heat source.
  • Keep the monitor out of the water source.
  • Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
  • Do not block the ventilation holes.
  • Do not knock or drop the monitor during operation or transportation.

Maintenance Guidelines

CAUTION
Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.
Caring For Your Monitor

  • To clean your screen, slightly dampen a soft, clean cloth with water, If possible, use a special screen-cleaning tissue or solution. Do not use benzene, thinner, ammonia,  abrasive cleaners, or compressed air.
  • Use a slightly dampened, warm cloth to clean the frame. Avoid using detergent of any kind as some detergents might leave a milky film on the plastics.
  • Unplug the monitor if you are not going to use it for an extended period of time.
  • To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. If your monitor gets wet,  wipe it with a dry cloth as soon as possible.

The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

Box Contents

Itek ITMC27V241QHD GGC Monitor - Box Contents

Product Overview

4.1 – Monitor ButtonsItek ITMC27V241QHD GGC Monitor - Figure
1

  1. Press the rocker to turn the display on/off.

  2. Rocker left scene mode switching.

  3. Rocker backward LED Effects.

  4. Rocker right Main Menu.

  5. Rocker forward GamePlus.
    4.2 – Monitor Ports
    Itek ITMC27V241QHD GGC Monitor - Figure 2

  6. Power Connector: Insert the power cable to supply power to the monitor.

  7. USB A: Connect any USB device.

  8. USB B: Obtain a USB Type B to USB Type A up-link cable and connect the Type B end to the back of the monitor and the other end to the back of the computer’s USB port.

  9. HDMI Connectors: Insert one end of the HDMI cable into the computer’s
    HDMI output and connect the other end to the monitor’s HDMI port.

  10. DP Connector: insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.

  11. Type-C: Insert one end of the Type-c cable into the computer’s Type-C output and connect the other end to the monitor’s Type-C port.

  12. Audio Output: Insert the audio cable for the output of audio signals.

Stand installation

Make sure the monitor is laid on a flat surface before removing the stand.

  1. Open the packing box, take out the bracket and the base, and use one bolt (the bolt can be found at the base) to attach the base of the stand to the upright section, as shown below:
    Itek ITMC27V241QHD GGC Monitor - Figure 3

  2. Attach the stand onto the rear of the monitor by locating the top of the upright section into position on the rear of the monitor before clipping in the bottom of the mounting plate. Ensure the mounting plate is fully located.
    Itek ITMC27V241QHD GGC Monitor - Figure 4

  3. Once it is inserted press downwards on the neck until you hear a click sound.

  4. Use both hands to stand the assembled monitor on a flat desktop.
    Itek ITMC27V241QHD GGC Monitor - Figure 5

The stand can be removed from the rear of the monitor by pressing the quick- release button on the rear of the monitor.

Mount installation

VESA and/or mounting accessories are not included.

  1. Use a screwdriver to remove the four screws locked in the middle of the whole machine (when disassembling the screws, the display screen can leave the polyol foam to  prevent the screen from breaking)
    Itek ITMC27V241QHD GGC Monitor - Figure 6

  2. Take out the wall-mounted adapter with four PM4*9 screws from the accessories, assemble it in the middle of the whole machine, and fix it by locking it.
    Itek ITMC27V241QHD GGC Monitor - Figure 7

  3. Do not pinch the screen directly with your hands during the process of hanging the product to prevent the screen from breaking.
    Itek ITMC27V241QHD GGC Monitor - Figure 8

Connectivity Options

7.1 – Connecting the Power Cable
Connect the included power cable to the power connector and then plug the other end into a wall outlet.

Itek ITMC27V241QHD GGC Monitor - Figure 9

7.2 – Connecting Your Earphones
Plug in your earphones to receive audio signals from your monitor.

Itek ITMC27V241QHD GGC Monitor - Figure 10

Exposure to loud audio for prolonged periods of time may permanently damage your hearing.

7.3- Connecting Type-C
Connect to this monitor from your compatible computer using a Type-C cable to receive a high-quality digital video signal. The Type-C interface can also be used as an external power supply to your mobile phone. Itek ITMC27V241QHD
GGC Monitor - Figure 11

7.4 – DP Connectivity
For the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer. Itek ITMC27V241QHD GGC Monitor - Figure
12

7.5 – HDMI Connectivity
For the monitor to receive HDMI signals from the computer, use an HDMI cable to connect the monitor to the computer.Itek ITMC27V241QHD GGC Monitor -
Figure 13

Basic Operation

  1. Insert one end of the DP cable into your PC’s graphics card. An HDMI cable may also be used. HDMI cable is not included.

  2. Connect the other end of the cable to the corresponding connector on your monitor.
    Itek ITMC27V241QHD GGC Monitor - Figure 14

  3. Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a  wall outlet cannot be reached directly.

  4. Locate the power button on the monitor and press it to turn the monitor on.

Adaptive-Sync
This feature is off by default. To activate, you must have hardware with Adaptive-Sync capability, a DP or HDMI cable, and the latest graphic drivers. After connecting your computer and monitor with a DP or HDMI cable, you may receive a prompt to enable the feature on your computer. If you do not, you may need to enable the function in your graphics card menu.
See your graphics card manufacturer’s documentation for instructions.

indicator Light

Itek ITMC27V241QHD GGC Monitor - Figure 15

Solid blue light indicates power is on and the monitor is operating normally. Red and blue flash alternately during standby, Red when shutting down.

On-Screen Display (OSD)

The menu for the monitor can be accessed by pressing the menu button on the control panel. Details of each menu can be found in the following section.
When using the monitor for the first time, settings will automatically adjust to optimal settings according to your computer’s configuration and parts etc.

  1. The monitor includes one touch options to access common settings.
    Itek ITMC27V241QHD GGC Monitor - Figure 16

  2. Remote sensing (Right) to enter the OSD screen.
    Itek ITMC27V241QHD GGC Monitor - Figure 17

  3. Remote sensing Front ( ) or After ( ) to browse functions.

  4. Remote sensing Left ( ) to exit the current screen.

10.1- OSD Menu Functions

Main Menu Sub-Menu Options Description
Input Source Type-C NONE Switch to Type-C signal input
DP NONE Switch to DP signal input
HDMI1 NONE Switch to HDMI1 signal input
HDMI2 NONE Switch to HDMI2 signal input
Brightness/ Contrast Brightness 0-100 Adjust display brightness
Blacklevel 0-100 Adjust display black level
Contrast 0-100 Adjust display contrast
OCR On, Off Turn on/off DCR function
Light Sensor On, Off Turn on/off light sensor function
Color Setting Gamma 2. Set Gamma add-in

2.0
2.
2.
3.
Picture Mode| Standard, Photo, Movie, Game,
FPS, RTS, ECO| Set visual mode according to activity
Color Temperature| Warm, Cool, User| Select color temperature
Low Blue Light| 0-100| Set blue light filtering level
Hue| 0-100| Adjust hue levels
Saturation| 0-100| Adjust saturation levels
RGB Range| Full, Limited| Select RGB range mode full and limited
Picture
Quality
Setting| Sharpness| 0-100| Set display sharpness
Response Time| Off, High, Middle, Low| Adjust response time
Noise Reduction| Off, High, Middle, Low| Reduce the interference of image noise caused by signal source interference
Dynamic Luminous Control| On, Off| Compensate for gray scale display screen and strengthen the expression of grayscale
MPRT| On, Off| Moving Picture Response Time
Display| Aspect Ratio| Wide Screen, 4:3, 1:1, Auto| Select the on-screen aspect ratio
Audio| Mute| On, Off| Turn mute mode on/off
Volume| 0-100| Adjust audio volume
Audio Source| AudioSource, Type-C, DP, HDMI1, HDM2| Select audio signal input via Type-C, HDMI, DP or AudioSource
Main Menu| Sub-Menu| Options| Description
---|---|---|---
Multi-Window| Multi-Window| Off, PIP Mode, PBP-Phone,
PBP 2Win| Select PIP/PBP modes according to the number of input signals etc.
Sub Win2 Input| Type-C, DP, HDMI1, HDMI2| Select according to input signal for PIP/ PBP mode
PIP Size| Small, Medium, Large| Adjust the PIP/PBP display window size
PIP Position| Top Right, Top
Left, Bottom Right, Bottom Left| Adjust the PIP/PBP window position
Swap| NONE| Swap the two-channel signal source of only the PIP/PBP 2 screens function
OSD| Language| English. Mf4(cii.SC, 8:1. 01. Pycciaitri, Espanol, Francais, Italian| Set OSD language
OSD H-Position| 0-100| Adjust the OSD’s horizontal position
OSD V-Position| 0-100| Adjust the OSD’s vertical position
OSD Transparency| 0-100| Set the OSD’s overall transparency
OSD Time Out| 5-100| Set how long the OSD remains open after non-use
OSD Rotation| Norma1,90,
180,270| When the user flips the display, this function can also flip the OSD to achieve the best display angle
Other| DP Version| DP1.1, DP1.2, DP 1.4|
Adaptive-Sync| On, Off| Turn the Adaptive-Sync function on/off
HDR| On, Off; HDR1000| Turn the HDR mode on/off
USB Update FW| None| Choose whether to upgrade the USB
USB Update (sleep)| On, Off| Turn USB power(sleep) on/off
Reset| None| Reset monitor configurations

LED Effects System Console

Itek ITMC27V241QHD GGC Monitor - Figure 18

Game plus Switching

Remote sensing Front ( ) to switch Game plus modes. According to the needs of your game, choose the corresponding game icon. These game icons are primarily designed to optimize your aim during shooting games, though they can be used for other scenarios.

Technical Specifications

Model ITMC27V241QHD
Screen Size 27″
Aspect Ratio 16:09
Backlight E-LED
Brightness 650cd/m2(Typ.)
Panel Rapid VA
Resolution DP1.4: 2560×1440@240Hz HDMI2.0: 2560×1440@144Hz Type-C:

2580×1440@144Hz
Refresh Rate| 240Hz
Response Time| 1ms
Viewing Angle| 178°(H) / 178°(V)
Contrast Ratio| 2500:1
VESA Mounting| 100x100mm
Display Colours| 16.7M
Interface| DP 1.41, HDMI 2.02, Audio out-1, USB A2, USB B1, Type-C`1(65W)
Power Input| DC 19.5V .-, 9.23A
|
Audio
Speakers| NO
Audio Out| Yes
|
Accessories
Power Cable| Yes
Power Adapter| Yes
DisplayPort Cable| Yes
|
Additional Functions
Low Blue Light| Yes
Flicker Free| Yes
|
Physical Dimensions
Dimensions (w/ stand)| 615.8-269.22 559.5mm
Dimensions (w/o stand)| 615.8-122.39*371.9mm
Net Weight| 5.18kg
Gross Weight| 8.4kg

For more information please visit our web site or write us an email:
https://www.itekevo.com
info@itekevo.com

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals