itek ITMF40I Monitor GGF UltraWide User Manual

June 5, 2024
itek

itek ITMF40I Monitor GGF UltraWide

itek-ITMF40I-Monitor-GGF-UltraWide-product-image

Safety Precautions

WARNING: Safety Instructions
Do not place the monitor in rain, humid environment or open the monitor case to avoid any shock, electrical hazards, and/or mechanical hazards.
Operation

  • Keep the monitor out of direct sunlight and away from stoves or any other heat source.
  • Keep the monitor out of water source.
  • Remove any object that could fall into ventilation holes or prevent proper cooling of the monitor’s electronics.
  • Do not block the ventilation holes.
  • Do not knock or drop the monitor during operation or transportation.

Maintenance Guidelines

CAUTION Before cleaning the monitor, unplug the monitor power cable from the electrical outlet.

Caring For Your Monitor
  • To clean your screen, slightly dampen a soft, clean cloth with water, If possible, use a special screen-cleaning tissue or solution. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.
  • Use a slightly dampened, warm cloth to clean the frame. Avoid using detergent of any kind as some detergents might leave a milky film on the plastics.
  • Unplug the monitor if you are not going to use it for an extended period of time.
  • To avoid the risk of shock or permanent damage to the set, do not expose the monitor to dust, rain, water, or excessive moisture environment. If your monitor gets wet, wipe it with dry cloth as soon as possible.

Box Contents

  • Monitor x 1

  • Stand Stem x 1

  • Stand Base x 1

  • Screws PM5*15mm x 4 (for stand installation)

  • Screws PM4*16mm x 5 (for wall mounting)

  • VESA Adapter x 1

  • DP Cablex 1

  • TYPE-C Cable x 1

  • Power Cable x 1

  • Screwdriver x 1

  • User Manual x 1

Product Overview

Monitor Buttons

itek-ITMF40I-Monitor-GGF-UltraWide-12

  1. Press rocker to turn the display on/off.
  2. Rocker left scene mode switching.
  3. Rocker backward LED Effects.
  4.  Rocker right Main Menu.
  5. Rocker forward GamePlus.
Monitor Ports

itek-ITMF40I-Monitor-GGF-UltraWide-13

  1. HDMI Connectors: Insert one end of the HDMI cable into the computer’s HDMI output and connect the other end to the monitor’s HDMI port.
  2. DP Connector: Insert one end of the DP cable into the computer’s DP output and connect the other end to the monitor’s DP port.
  3. Type-c: Insert one end of the Type-c cable into the computer’s Type-c output and connect the other end to the monitor’s Type-c port.
  4. Audio Output: Insert the audio cable for output of audio signals.
  5. Power Connector: Insert the power cable to supply power to the monitor.

Stand Installation

  1. Unpack the carton, take out the upper and lower covers of Styrofoam, and lay it flat on the desktop. Remove the top cover of Styrofoam, then take the body out of the film-coated bag and place it in the cavity of the lower cover of Styrofoam again.

  2. Take out the bracket and base, and lock them with three PM5*15mm screws (One extra spare screw is provided), as shown in the figure below.

  3. As shown in the figure above, put the base assembly assembled in step 2 into the corresponding slot of the rear case, gently press the bracket to fit the shaft assem­bly into the lock, and then hold the middle of the bracket and lift it up twice, and tripped to ensure that the buckle can lock the base assembly. When disassembling, follow the reverse steps.itek-ITMF40I-Monitor-GGF-UltraWide-16Make sure the monitor is laid on a flat surface before removing the stand.

Mount Installation

A This monitor only includes screws which may be used when attaching the monitor to a VESA 75*75mm type mount. No VESA mount or mounting  accessory is included.

  1. Unpack the carton, take out the upper and lower covers of Styrofoam, and lay it flat on the desktop. Remove the top cover of Styrofoam, then take the body out of the film-coated bag and place it in the cavity of the lower cover of Styrofoam again.

  2. As shown in the figure above, take out the wall-mounted adapter and four PM4*16 screws from the accessories, assemble them in the middle of the whole machine, and lock them with a screwdriver. (Assembling and disassembling the screws, the display screen cannot leave the Styrofoam to prevent the screen from breaking)
    itek-ITMF40I-Monitor-GGF-UltraWide-18

  3. Do not pinch the screen directly with your hands during the process of hanging the product.

Connectivity Options

Connecting the Power Cable

itek-ITMF40I-Monitor-GGF-UltraWide-20Connect the included power cable to the power connector and then plug the other end into a wall outlet.

Connecting Your Earphones

itek-ITMF40I-Monitor-GGF-UltraWide-21Plug in your earphones to receive audio signals from your monitor. If you have an audio device connected to your computer when you connect your earphones to the monitor, the audio devices will not produce sound. Earphones and other audio devices are not included.
Exposure to loud audio for prolonged periods of time may permanently damage your hearing.

DP Connectivity

itek-ITMF40I-Monitor-GGF-UltraWide-22For the monitor to receive DP signals from the computer, use the DP cable to connect the monitor to the computer.

HDMI Connectivity

itek-ITMF40I-Monitor-GGF-UltraWide-23For the monitor to receive HDMI signals from the computer, use an HDMI cable to connect the monitor to the computer.

Basic Operation

  1. Insert one end of the DP cable into your PC’s graphics card. An HDMI cable may also be used. HDMI cable is not included.

  2. Connect the other end of the cable to the corresponding connector on your monitor.
    itek-ITMF40I-Monitor-GGF-UltraWide-24

  3.  Connect the power cable to your monitor then connect the other end to your power source. It is recommended that you use a surge protector with adequate voltage if a wall outlet cannot be reached directly.

  4. Locate the power button on the monitor and press it to turn the monitor on.

Indicator Light

itek-ITMF40I-Monitor-GGF-UltraWide-25Solid blue light indicates power is on and the monitor is operating normally. Red and blue flash alternately during standby. Red when shutting down.

On-Screen Display (05D)

The On-Screen Display (0SD) Menu may be used to adjust your monitor’s settings and appears on screen after turning on the monitor and pressing the M button.
® When optimal using settings the monitor according for to the your first time, computer’s settings will configuration automatically and parts adjust etc. to

  1. Press one of the buttons( , T, .A., 0, CJ ) to activate the navigation window .

  2.  Press (‘LJ’) to enter the 0SD screen.

  3. Press Tor •browse function.

    • Select the desired function and press O to enter the submenu.
    •  Press Tor• to browse the submenu, and then press O to confirm the selection of the desired function.
    • Press Tor •to select an option, then press Oto confirm the settings and exit the current menu.
  4. Press to exit the menu interface.

OSD Menu Functions

itek-ITMF40I-Monitor-GGF-UltraWide-28

Technical Specifications

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals